ZORDAI Z5 Smart Wear User Manual

Z5 Smart Wear
User Manual

Thank you for choosing our smartwatch. You can fully understand the use and operation of the equipment by reading this manual. The company reserves the right to modify the contents of this manual without any prior notice.
The package box contains a packing box, a manual, a watch body, and a charging cable.

Watch function description

Button Description:

1. When the watch is in the off-screen state, short press the rotary button to turn on the screen, and short press the rotary button again to turn off the screen;
2. When the watch is in the dial interface, double-click the rotary button to enter the menu interface, continually double-click it to change the menu style; rotate the rotary button to switch the dial; short press the bar button to enter the multi-sport mode, or long-press to quickly make emergency calls (need to connect to the Bluetooth of a mobile phone to use);
3. In the menu interface, rotate the rotary button to turn the page; short press any buttons to get back to the dial interface;
4. In any interface, long press the rotary button for 15 seconds to force a factory reset;
5. When in the second-level interface or the third-level interface, short press any buttons to return to the dial interface;
6. Long press the rotary button to control the watch on/off.

Charging instructions:

Wireless charging, as shown in the picture below.

1.1 Shortcut function:

1. Swipe to the left to find the “+” icon, click the icon to add part of the menu as a shortcut function.
2. Scroll down to find Bluetooth connection status, time, power, do not disturb mode, brightness adjustment and other functions.
3. Swipe to the right to display, time/date/week, the latest message (enter to view multiple messages)/turn on or off Bluetooth for calls and display some of the recently used menu functions.
4. Scroll up to enter the menu interface, and scroll up and down to find the corresponding function.
5. Long press the watch face to switch the watch face, select one and tap it to set it successfully.

1.2 Push message

1. When the watch is bound to the APP, and the notification permission is turned on, the new messages received in the notification bar of the mobile phone will be pushed to the watch, and a total of 10 messages can be saved. The messages received over 10 messages will be overwritten one by one.
2. Scroll to the bottom and press the delete icon to clear all message records.

1.3 Drop-down menu
Scroll down the watch face to enter the drop-down menu interface.

1. Bluetooth connection status; time display, power display;
2. Icon , to show the version of the watch and the Bluetooth address;
3. Icon , to adjust the brightness of the screen;
4. Icon , to control the music;
5. Icon , to set the phone number of the emergency call. In the dial interface, long press the bar button to quickly make the emergency call.
6. Swipe left for more shortcut functions: GPS, mode selection, power saving mode, alarm, flashlight, SOS (in power saving mode, the brightness display will be slightly different)

1.4 Phone/Call History

1. Enter the telephone function, and click “Open” to turn on the calling Bluetooth, you can see the name of the audio/calling Bluetooth, find the name in the mobile phone’s Bluetooth list, and bind it. After they are successfully connected, you can use the watch to answer or hang up the Bluetooth calls.
2. Call records can save the records of Bluetooth calls. 3)Enter the keyboard, and input your phone number to make Bluetooth calls.

1.5 Message
After you successfully bind the watch to the APP, and the corresponding notifications permission is allowed in your mobile phone system, notifications received in your mobile phone can be pushed to the watch.

1. Incoming call notification:
   Turn on the call reminder in the APP. When the phone receives a call, the watch will ring or vibrate.

2. SMS notification:
   The SMS notification can be enabled in the APP. When one or more SMS messages are received on the mobile phone, the watch will receive one or more SMS reminders at the same time.

3. Other applications’ notifications:
   Turn on the corresponding application notification switch in the APP, such as WeChat, QQ, Outlook, Facebook and other applications. When the mobile phone receives one/multiple application notifications, the watch will receive one/multiple corresponding message reminders at the same time.

1.6 Frequently used contacts
Bind the watch to the APP first, then open the APP, tap “Device”>“Frequent contacts”>“Add contacts (up to 20 contacts can be added)>“Syn to watch”.

1.7 Fitness data
The fitness data is turned on by default. Enter the fitness data interface and scroll down to display the current number of steps, distance, and calories of the watch. The data will be cleared at 00:00 every day.

1.8 Smart mode selection
When the watch is switched to watch mode, the watch will disconnect the Bluetooth connection and the watch can be used independently, making it more power-efficient.
When the watch is switched back to smart mode, the watch can connect to the APP on the phone to perform more smart operations.

1.9 Sports modes (strike, running, cycling, rope skipping, badminton, basketball, football! etc.)

1. Select the corresponding exercise mode, click the start button on the screen to enter the corresponding exercise mode; click the start button to start or pause the calculation of the exercise, click the end button to end the exercise and save the data.
2. When the exercise time is longer than | minute, the exercise data can be saved; when the exercise is less than one minute, it will prompt “Too little data to save”.
3. Newly added more exercise modes to choose from, such as gym, yoga, indoor running and free training.
4. Newly added the GPS movement track. When you start the sport function in the APP, the watch will enter the sport mode simultaneously. After the exercise, the data in the APP like GPS movement track will synchronize to the watch for you to check conveniently.

1.10 Heart rate
Wear the watch on your wrist correctly, enter the heart rate feature, and you can measure the heart rate for once each time(Please make sure you wear it firmly when you measure).

1.11 ECG
Wear the watch on your wrist correctly, enter the ECG feature (need to open the interface of “ECG Detection” in the APP), you can measure the ECG for once each time, and the single ECG measurement result can be saved in the APP simultaneously. This function needs the watch to connect to the APP to use(Please make sure you wear it firmly when you measure).

**My QR code

**

Connect the watch to the APP, find My QR Code in the APP, and select WeChat/QQ/Alipay and other “Receive money QR codes” to sync to the watch ( Please follow the instructions in the APP for the specific operation).

2.1 Calculator
Simple calculations can be performed with the watch.
2.2 Remote control music
By connecting the watch to the APP, you can control the phone’s music, and songs will be broadcast on the phone. Connecting to the calling Bluetooth of your mobile phone either, you can control the phone’s music, and the music will be broadcast on the watch.
2.3 Sleep
The sleep monitoring feature works between 18:00 at dusk and 10:00 in the morning the next day. After you wake up, the sleep data on the watch can be synchronized to the APP  for viewing after connecting it to the APP.
2.4 Stopwatch
Click “Stopwatch” to enter the timing interface, and you can record the time once each time..
2.5 Weather
After the watch is connected to the app and the data is synchronized, click on “Weather” on the watch to display the weather information of the day.
2.6 Find mobile phone
After the watch is bound to the app, click “Find phone” on the watch to find the compatible phone, and the phone will vibrate or ring tones.
2.7 Meteorology
Click on “Meteorology” on the watch to display the ultraviolet (UV) and air pressure conditions of the day.
2.8 Breathing
There are three modes of breathing training: slow, moderate, and fast. Users can take the breath training based on the mode they select.
2.9 Massager
Tap the green button to start the massage, and if the watch is in a vibrating state, tap the red button to end the massage.
2.10 Time setting
Disconnected from the APP and set the time function on the watch separately.
2.11 Voice assistant
After the watch is connected to the calling/audio Bluetooth of your mobile phone, you can wake up the phone’s voice assistant feature with a double-click on the watch. (for example, iOS phone is Siri, Android phone is the voice assistant).
2.12 Flashlight
Tap the flashlight icon, the watch screen will be fully lit to achieve the flashlight effect.

Female assistants

To check the status of women’s menstrual period, you can view the data of the last time of menstrual period, such as the length of the menstrual period, and the number of days between menstrual periods in the app.

3.1 Menu style
There are a variety of menu styles to choose from.
3.2 Settings

1. You can select the watch language on the settings of the watch, or the watch language can be synchronized with your mobile phone language after the watch successfully binds to the APP.
2. Switch the watch face, swipe to the right to view the next watch face, select a watch face, and click it to set the watch face.
3. Set screen time; a variety of screen time lengths can be selected.
4. Vibration intensity; set reminder vibration intensity.
5. Password; a 4-digit password can be set (if you forget the password, please enter 8762 to decrypt the previous password).
6. Restore factory settings; clicW to enable the factory reset, and click X to cancel the factory reset.

APP Binding

1. APP download
   1.1 Scan the QR code to download the APP
   https://zordai.com/i.htm
   1.2 For Android users:
   Search” ZORDA!” in Google Play or any customized Android Stores to download, pay attention to the phone pop-up box, and tap“Agree” to give permissions to the APP when installing;
   1.3 For iOS users:
   Search “ZORDAI” in APP Store to download, pay attention to the phone pop-up box and tap“Agree” to give permissions to the APP when installing;
   After ZORDAI is installed, the application icon is shown as:

2. Connect APP through mobile phone Bluetooth
   2.1 Search for Bluetooth name to connect/pair Scroll down the watch face, find the icon “About (i)” and click it, and remember the Bluetooth name of the watch; then  open the app ZORDAI, click on “Device” at the bottom bar, and click on” Search to bind device” to start searching.Find the Bluetooth name of your watch and pair it. If  the connection is successful, the Bluetooth icon of the watch will light up green (in the middle of the icon);
   2.2 Scan QR code to connect/pair Scroll down the watch face, find the icon “About {i)” and click it, you can see a QR code for connection, then open theAPP ZORDAI,  click on “Device”at the bottom bar, select “Scan to bind device”, the pairing box will pop up after scanning the QR code. Click “Pair” to bind the APP to the watch.  Remember to agree to the apps notification permissions on the watch;

2.3 Connection Precautions

1. If you can’t connect to the Bluetooth, see if you can find the Bluetooth name of the watch in the mobile phone settings;
2. Check whether the permission of your mobile phone location(GPS) is enabled;
3. Whether the watch has been bound by other mobile phones;
4. Turn off the Bluetooth on the phone and turn it on again;
5. Restart the phone;
6. Go to the Bluetooth settings on your mobile phone, find the Bluetooth name of the watch, disconnect with the watch by forgetting the device, then go to the APP to rebind.
7. Too many devices connected to the mobile phone can lead to the Bluetooth connection failure of the watch. The number of devices that can connect to a mobile phone is limited, please stay no more than 3 frequently use devices connected to the Bluetooth of a mobile phone.

Connect to the audio/calling Bluetooth of the watch:
Open the Bluetooth settings of your mobile phone, swipe to the right when the watch is on the dial interface, click the “BT call” icon, then click “Open” to see the name of the audio/calling Bluetooth. Find the Bluetooth name in the Bluetooth list of the phone and pair; after the audio/calling Bluetooth is connected, the Bluetooth icon of the watch is  displayed as (the outer periphery ) lights up in blue;
Tip: Based on this connection, make sure to tap on various APP notification synchronization permissions in ZORDAI settings, to realize synchronously viewing of various messages from a mobile phone on the watch; to realize all connection functions(like making a phone call through the watch), make sure that the watch is connected to both the APP  and the audio Bluetooth of the phone.

Unbind Bluetooth connection from the APP

1. Android system unbindBluetooth from the APP
   In the “Device” column of ZORDA! , scroll down to the “Unbind” and click to unbind the App;

2. IOS system unbinds Bluetooth from the APP
   In the “Device” column of ZORDAI, scroll down to “Unbind” and click to unbind the App; then go to the Bluetooth settings of the phone, select the Bluetooth name of the smartwatch, and click “Forget this device”.

Unbind audio Bluetooth connection

To disable the audio Bluetooth connection, find the name of the audio Bluetooth in the Bluetooth settings of the mobile phone, and click “Ignore this device” to unbind all Bluetooth connections with the watch.

Click the Alipay icon on the main interface(scroll down screen) of the watch, and complete the binding with your personal Alipay account.

Use and maintenance advice

1. Keep the device clean;
2. Keep the device dry;
3. Wear the watch correctly, do not wear the device too tightly;
4. Avoid prolonged exposure to extreme temperatures that are too cold or too hot, which may cause permanent damage to the device.

Warranty description

1. If there are any quality problems caused by manufacturing, materials, design, etc. in normal use, the motherboard of the watch is guaranteed for repair for free within one year, while the battery and charger are within half a year from the date of purchase.
2. No warranty is provided for failures caused by the user’s personal reasons, as follows:
   1). Failure caused by unauthorized disassembly or modification of the watch.
   2). Failure caused by accidental fall during use.
   3). All man-made damages or the third party’s fault, or misuse (such as water in the device, cracking by an external force, scratches on the case, damage, etc.) are not covered in the warranty.
   3. When requesting the warranty service, please provide a warranty card with the date of purchase and the stamp of the place of purchase on it.
   4. When the user needs the device repaired, please take the device to our company or our company’s dealership.
   5. For All functions of the device please refer to the actual product. Purchase date:

IMEI code:
Where to buy:
Customer Signature:
Signature of Store Clerk:
Stamp of Store:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>