Bestway 68123 WanderLite 2 in 1 Sleeping Bag and Air Pad User Manual
- June 16, 2024
- Bestway
Table of Contents
Bestway 68123 WanderLite 2 in 1 Sleeping Bag and Air Pad
Product Information
Specifications
- Product Name: Reparasjonslapp
- Alternate Names: Lagningslapp, Korjauspaikka, Ielps remontamTaisymo lopas, Zaplata za popravilo, Onarim yamasi, Petic dereparaii, Zakrpa za popravak, Remondilapp, Zakrpa za popravku
- Item Numbers: 1, 2, 3*
- Includes: Glue not included
Product Usage Instructions
Step 1: Prepare the Surface
Ensure that the surface to be repaired is clean and free from any dirt or debris. Use a mild detergent and water to clean the area if necessary. Allow the surface to dry completely before proceeding to the next step.
Step 2: Cut the Patch
Using scissors or a utility knife, carefully cut out a patch from the Reparasjonslapp. The size of the patch should be slightly larger than the area to be repaired.
Step 3: Apply Glue (not included)
If using glue, apply a thin layer evenly on the backside of the Reparasjonslapp patch. Make sure to cover the entire area that will be in contact with the surface.
Step 4: Position and Press
Carefully position the Reparasjonslapp patch over the damaged area. Press firmly and evenly to ensure proper adhesion. Hold the patch in place for a few seconds to allow the glue to bond with the surface.
Step 5: Wait for Drying
Allow the Reparasjonslapp patch to dry completely before using or applying any pressure to the repaired area. The recommended drying time is 30 minutes, but it may vary depending on the temperature and humidity.
Frequently Asked Questions
Q: Is glue included in the Reparasjonslapp package?
A: No, glue is not included. You will need to purchase glue separately.
Q: What are the dimensions of the Reparasjonslapp patches?
A: The dimensions of the Reparasjonslapp patches are 30mm x 30mm.
Repair patch
Installation
Tools
Glue not included