VIVO MOUNT-PLAY1B/W Designed Dual Wall Mount Instruction Manual
- July 15, 2024
- Vivo
Table of Contents
Dual Wall Mount Designed for
Sonos One, One SL, Play 1
Instruction Manual
SKU: MOUNT-PLAY1B/W
Assembly Video & Product Info www.vivo-us.com/products/mount- play1b
CAUTION!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please contact our product support team at
309-278-5303 or help@vivo-us.com for
further assistance. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do
not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
WARNING : DO NOT INSTALL INTO DRYWALL ALONE
VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting
for brick and concrete walls. If unsure, please contact us at vivo-us.com,
email at help@vivo-us.com, or call us at
309-278-5303.
We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CS T,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
Give us a Call:
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): < 15 M
---|---
Chat Us: www.vivo-us.com| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
Email Us: help@vivo-us.com| AVG. RESPONSE TIME
(within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
Package Contents
Included Hardware & Tools
Tools Needed:
ASSEMBLY STEPS
STEP 1
Separate Mounts (A) into Wall Bracket (A1) and Support (A2).
STEP 2 Option 1: Wood Stud Mounting
Use the Wall Brackets (A1) and a pencil to mark mounting holes on the wall where a stud is located. Use of a stud finder and level is recommended.
Pre-Drilling Instructions
Drill mounting holes using illustration below.
Wood Stud Mounting – Cont’d
Secure the Wall Brackets to the wall using ST5.5x50mm Screws (W-A) and a
Phillips screwdriver.
Press Covers (C) into the Wall
Brackets.
Option 2: Concrete/Brick Wall Mounting
Use the Wall Brackets (A1) and a pencil to mark mounting holes on the wall.
Use of a level is recommended.
Pre-Drilling Instructions
Drill mounting holes using illustration below.
Concrete/Brick Wall Mounting – Cont’d
Press Concrete Anchors (W-B) into the drilled holes. Secure the Wall Brackets to the wall using ST5.5x50mm Screws (W-A) and a Phillips screwdriver. Press Covers (C) in to the Wall Brackets.
Press Covers (C) into the Wall Brackets.
STEP 3
Route the speaker power cables through the slots in the Supports (A2), and
place the speakers on the Supports.
Secure Support Brackets (B) to the Supports using M4x6mm Screws (S-A) and a Phillips screwdriver. Do not over-tighten.
STEP 4
Insert the Metal Rods on Supports (A2) into the Wall Brackets (A1). Secure
using M5x8mm Screws (S-B) and a Phillips screwdriver.
STEP 5
Adjust the tilt by adjusting the screws located on the side of the Mount (A)
using 4mm Allen Wrench (T-A).
[ THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ]
LAST UPDATED: 7/02/24
REV2
v1.0
Monday-Friday from 7:00am-7:00pm CST
Need Help? Get In Touch
help@vivo-us.com
www.vivo-us.com Chat live with an agent!
309-278-5303
VIVO-us
@vivo_us
FOR MORE GREAT
VIVO PRODUCTS,
CHECK OUT OUR
WEBSITE AT: WWW.VIVO-US.COM
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>