RODE 301-950-1-2 Lavalier Microphone Instruction Manual
- June 13, 2024
- Rode
Table of Contents
Lavalier Microphone
Instruction Manual
INTRODUCTION
Thank you for investing in the Lavalier microphone.
Whether you’re presenting for television or live on-stage, in a 20,000 seat
auditorium or in a house of worship, has your needs covered with the reliable
and discreet Lavalier.
Featuring the pure, clear audio and low handling noise that is celebrated for,
the Lavalier is built to deliver and to last.
The included water resistant pop fi lter and mini-furry for high wind
protection ensure quality recordings in adverse environments, while the anti-
trauma water resistant case provides rugged and secure protection for the
microphone, cable and accessories.
Knowing that versatility is paramount in any product, we at have developed the
MiCon™ connector system which provides seamless integration between the
Lavalier and a wide range of wireless systems.
Please take the time to visit www.rodemic.com and register your microphone for
warranty.
Peter Freedman
Microphones Sydney, Australia
FEATURES
ERGONOMIC DESIGN
- Ultra discreet appearance
- Incorporated cable management system
HIGH QUALITY PERFORMANCE
- Ø4.5mm (Ø0.177”) miniature microphone
- Corrosion resistant stainless steel
- Low handling noise
UNIVERSAL COMPATIBILITY
- RØDE MiCon™ connector system provides seamless integration with a wide range of wireless systems while maintaining discreet and unobtrusive appearance
- Gold plated connections
LAVALIER & ACCESSORIES
- RØDE Lavalier (microphone head)
- Anti-trauma water resistant storage case
- Water resistant pop fi lter
- Mini-furry for high wind protection
- Shielded, detachable Kevlar® reinforced cable
- Lapel-style cable management clip
- Adjustment tools
- Sanitary cleansing wipes
Compact, interchangeable MiCon™ adaptors available to suit industry standard wireless systems*
*MiCon™ adaptors sold separately-seerodemic.com/lavalier for a full list of compatibility
SPECIFICATIONS
| Acoustic Principle: | Permanently polarised condenser |
|---|---|
| Directional Pattern: | Omni-directional (see graph) |
| Frequency Range: | 60 Hz ~ 18 KHz |
(see graph)
Output Impedence:| 3k Ω Typical
Signal To Noise Ratio:| 69 dB
Equivalent Noise:| 25 dBA SPL (per IEC651)
Clipping SPL:| 110 dB
Maximum Output:| 189 mV
Sensitivity:| -33.5 dB re 1 V/Pa
(21 mV @ 94 dB SPL)
± 3 dB @ 1 kHz
Dynamic Range:| 85 dB Typical
Power Requirements:| Min 2 V ~ Max 5 V through RØDE wireless adaptors
P48 through RØDE XLR adaptor
Output Connection:| RØDE MiCon™ connector
FREQUENCY RANGE
POLAR RESPONSE
** Calculated from maximum SPL peak before clipping.
All measurements are calculated when powered at 5 V or P48 (RØDE XLR adaptor)
MIC PLACEMENT
For the best performance, the Lavalier microphone should be positioned as
close as possible to the sound source, without being subject to clothing
rustle, gusts of air or dust.
Also ensure the mic is pointed as much as is convenient towards the user’s
mouth.
At times it may be best to test different placements to provide the optimal combination of sound quality and discretion.
FITTING AND CABLING
To fit your Lavalier onto clothing and connect to your wireless system, first securely fasten one end of your MiCon™ cable to the Lavalier. The RØDE spanner can assist you in this assembly.
Next, mount the Lavalier into the provided lapel clip. Hold the clip between two fingers, with one finger pressing down on the end of the wire loop. This will create enough leeway to insert your Lavalier through the wire.
Rest the mic in the loop so that the wire encircles one of the grooves on the mic’s body. Once you ease off your grip on the wire, the microphone will be held securely in place.
To prevent tangling, clip the cable into the groove on the lapel clip. Then the clip is ready to be attached to an appropriate part of the user’s clothing.
To connect your Lavalier to your wireless system, securely fasten the corresponding adaptor to the other end of your MiCon™ cable. The RØDE spanner can assist you in this assembly.
The Lavalier‘s connections have been designed using the RØDE MiCon™ connector
system, which provides seamless integration with a wide range of wireless
systems, while maintaining the mic’s discreet appearance. (MiCon™ adaptors
sold separately – see rodemic.com/lavalier for
a full list of compatibility.)
Plug the adaptor into your wireless system and you’re ready to go.
INCLUDED ACCESSORIES
WATER RESISTANT POP FILTER
The pop fi lter is an optional attachment to your Lavalier which reduces
plosives (gusts of wind noise caused by hard sounds such as ‘p’ or ‘t’).
It is also strongly recommended you use your pop fi lter to protect the
Lavalier in any extreme environments which are overly dusty or moist, to
prevent damage to the mic.
To correctly fi t your pop fi lter, slide the fi lter over the Lavalier until it
reaches the first groove. Pushing the fi lter any further down will result in
decreased protection of the capsule.
MINI-FURRY
For increased wind protection, a mini-furry windshield is provided with the
Lavalier. The windshield is ideal for situations such as outdoor performances,
where wind noise may distort the audio quality of the mic.
To fit, simply slide the mini-furry straight over the Lavalier until it reaches
the first groove. Ensure the fur is fluffed up in all directions for maximum
effectiveness.
STORAGE & CARE
When not in use, always keep your Lavalier in the storage case provided. Close
and snap the storage case for complete protection.
Inside the case, you will find a sachet of moisture absorbent crystals. Please
retain these crystals and store with the Lavalier to keep the microphone in
ideal condition.
Eventually this pack of crystals will need to be dried. This is indicated by
the crystals turning pink in colour. They can easily be re-used by placing
them in an oven at 100-150 degrees Celsius for approximately ten minutes. The
crystals will operate effectively again once they have turned blue.
In some cases, such as when there are multiple users of the Lavalier, you may
wish to sanitise the microphone and cable. To do this, use the provided
Sanitary Cleansing Wipes to wipe down the Lavalier surface. You may wish to
detach the microphone from the lapel clip and cable for easier access.
Please be mindful when cleaning the Lavalier not to let any dust or moisture
into the microphone capsule.
SUPPORT
If you experience any problem, or have questions regarding your microphone,
first contact the dealer who sold it to you.
We have an extensive dealer network to assist you.
If you have difficulty getting the advice or assistance you require from the
dealer, do not hesitate to contact us directly via the details below.
INTERNATIONAL
107 Carnarvon Street
Silver water NSW 2128 Australia
Ph: +61 2 9648 5855
Fax: +61 2 9648 2455
USA
P.O. Box 4189
Santa Barbara, CA 93140-4189
Ph: 805 566 7777
Fax: 805 566 0071
TECHNICAL SUPPORT
For information and technical support please visit
www.rodemic.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>