VIVO CART-V01BK Black Height Adjustable Laptop Desk Exercise Bike Cart Instruction Manual

VIVO CART-V01BK Black Height Adjustable Laptop Desk Exercise Bike Cart

Product Information

The Black Laptop Desk / Exercise Bike Cart is a versatile product that can be used as a desk or exercise bike cart. The product comes with support columns, a crossbar, feet, locking casters, casters, a desktop, screws, and wrenches. The product has a weight capacity of 11lbs (5kg) and is designed to prevent tip-over and choking hazards. The product can be assembled by following the instructions provided in the manual.

Product Usage Instructions

1. Decide whether you want the Locking Casters (D) to be in the front or rear of the cart. The front of the Feet (C) are the holes furthest away from the foot mounting plate. Screw the Casters (D, E) into the Feet (C) using the wrench (T-A).
2. Attach the Cross Bar (B) to each of the Support Columns (A) using M6x25 Screws (S-A). Note that the more giant Cross Bar (B) hole should be facing upwards. Tighten with the 4mm Allen Wrench (T-B).
3. With the column, assembly flipped upside down, secure the Feet (C) to the Support Columns (A) using M6x12 Screws (S-B). Tighten with the 4mm Allen Wrench (T-B). Note: make sure the longer end of the foot (C) is on the same side as the longer end of the Support Columns (A).
4. Attach the Support Columns (A) to the Desktop (F) using M5x12 Screws (S-C). Tighten using the Philips end of the 4mm Allen Wrench (T-B) or a Phillips screwdriver.
5. Loosen the levers on the Support Columns (A) to adjust the height of the desktop.

If any parts are received damaged or defective, please get in touch with the VIVO support team at 309-278-5303 or help@vivo-us.com. The support team is available Monday-Friday from 7:00 am-7:00 pm CST and can offer immediate assistance with rapid response times. They are happy to replace parts to ensure you have a fully functioning product.

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual https://vivo- us.com/products/cart-v01bk

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

• help@vivo-us.com
• www.vivo-us.com Chat live with an agent!

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF THE CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO THE WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

• Decide whether you want the Locking Casters (D) to be in the front or rear of the cart. The front of the Feet (C) are the holes furthest away from the foot mounting plate. Screw the Casters (D, E) into the Feet (C) using the wrench (T-A).

STEP 2

• Attach the Cross Bar (B) to each of the Support Columns (A) using M6x25 Screws (S-A). Note that the larger hole in the Cross Bar (B) should be facing upwards. Tighten with the 4mm Allen Wrench (T-B).

STEP 3

• With the column assembly flipped upside down, secure the Feet (C) to the Support Columns (A) using M6x12 Screws (S-B). Tighten with the the 4mm Allen Wrench (T-B).

Note: make sure the longer end of the foot (C) is on the same side as the longer end of the Support Columns (A).

STEP 4

• Attach the Support Columns (A) to the Desktop (F) using M5x12 Screws (S-C). Tighten using the Philips end of the 4mm Allen Wrench (T-B) or a Phillips screwdriver.

STEP 5

• Loosen the levers on the Support Columns (A) to adjust the height of the desktop.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 11/03/2022 REV1.1 Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

• 309-278-5303
• www.vivo-us.com Chat live with an agent!
• help@vivo-us.com
• AVG. RESOLUTION TIME (within office hrs): 5M 4S
• AVG. RESOLUTION TIME (within office hrs): < 15 M
• AVG. RESPONSE TIME (within office hrs): 1HR 8M
  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Black Height Adjustable Laptop Desk / Exercise Bike Cart – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>