VIVO DESK-M051MB Compact Crank Height Adjustable Desk Frame Instruction Manual

: October 30, 2023
: Vivo

Table of Contents

DESK-M051MB Compact Crank Height Adjustable Desk Frame
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Black Compact Crank Height Adjustable Desk Frame
SKU: DESK-M051MB
Instruction Manual

DESK-M051MB Compact Crank Height Adjustable Desk Frame

ASSEMBLY VIDEO AVAILABLE:
Follow along step-by-step with our video walk through by scanning the QR code with your mobile device or by following the product link: vivo- us.com/products/desk-m051mb

https://vivo-us.com/products/desk-m051mb

Contact Us First!
DO NOT RETURN ITEM
Our friendly product support team is here to help!
PERSONABLE CUSTOMER SUPPORT
7AM – 7PM
Monday-Friday
We’re Here for You!
Our customer-minded support team is here for YOU, Monday-Friday 7am-7pm CST.
We offer immediate assistance with rapid response times from customer service agents and product technicians to help you every step of the way!
Missing a Part? If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully functioning product
PRE-ASSEMBLY | BEFORE YOU BEGIN
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ELECTRICAL WARNING :
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
OUTDOOR USE IS PROHIBITED.

WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. Product Warranty
For the most up to date details on your product’s warranty, please visit the product’s listing on our website or reach out to customer support. vivo- us.com/products/desk-m051mb
Returns | Product Didn’t Work Out?
We offer a hassle-free 30 day return on all products. Contact customer support at 309-278-5303 or help@vivo-us.com. Please note: For items ordered in error or no longer needed, the return shipping charges will be at the buyer’s expense.

PACKAGE CONTENTS

Please consult the parts list below and ensure you have everything you need to assemble your product. If parts are missing or damaged, please contact us.

WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the worksurface. Failure to follow these instructions may result in serious personal injury.

ASSEMBLY STEPS

STEP 1: Extend the Crossbar
Loosen the screws on Telescopic Crossbar (A) using 4mm Allen Wrench (T-B) and extend the sides.
STEP 2: Install the Crossbar to Legs
Attach Telescopic Crossbar (A) to Leg (B) and Leg with Gearbox (C) using M6x25 mm Screws (S-A). Tighten with 4mm Allen Wrench (T-B).

STEP 3: Mount Side Brackets
Assemble Side Brackets (D) to the frame assembly using M6x10mm Screws (S-B) and 5mm Allen Wrench (T-C).

STEP 4: Assemble Feet
Mount Feet (E) to Leg (B) and Leg with Gearbox (C) using M6x35mm Screws (S-C) and 4mm Allen Wrench (T-B).

STEP 5: Adjust Frame Length
Extend Telescopic Crossbar (A) to fit the desktop. Retighten the screws on Telscopic Crossbar (A) using 4mm Allen Wrench (T-B).

STEP 6: Attach Desktop
Secure the frame assembly to the desktop using ST4.2x15mm Screws (S-E) and a Phillips screwdriver.
NOTE: If using the provided screws to secure your desktop, ensure the desktop thickness is 3/4” (19mm) or greater.

STEP 7: Install the Sync Rod
Loosen the knob on Sync Rod (F) and insert the rod into Leg (B). Extend Sync Rod (F) onto Leg With Gearbox (C). Tighten both knobs on Sync Rod (F) using Wrench (T-D).

STEP 8: Mount the Crank
Loosen the set screw on Crank Handle Sync Rod (H) using 2.5mm Allen Wrench (T-A) to extend the rod into Leg With Gearbox (C). Assemble Crank Handle (G) to Crank Handle Sync Rod (H) making sure Crank Handle Sync Rod (H) sits inside of the recess on the plastic mounting bracket on Crank Handle (G). Retighten the set screw on Crank Handle Sync Rod (H). Secure Crank Handle (G) to the desktop using ST4.2x15mm Rounded Head Screw (S-D) and a Phillips screwdriver.
NOTE: Leave at least 1.5” (40mm) of space from the mounting holes on Crank Handle (G) to the edge of the desktop, which will allow the crank to be fully pushed in.

STEP 9: Adjusting the Height
Turn Crank Handle (G) counter clockwise to raise the desk, and clockwise to lower. Slide Crank Handle (G) in and flip the handle around to store it when not in use.

CHECK OUT OTHER GREAT PRODUCTS FROM

EXPLORE MORE AT VIVO-US.COM
We offer a wide array of home & office products to fit your needs. From height adjustable desks to monitor mounts to keyboard trays and more!

SPEAKER MOUNTS & STANDS
Whether you’re mounting a soundbar or surround sound system, we’ve got a mounting solution to fit your needs| CABLE MANAGEMENT
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a mounting solution for your setup.| MONITOR MOUNTS
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a mounting solution for your setup.
| |
https://qrco.de/bd7j84| https://qrco.de/bd7j8W| https://qrco.de/bd7j5o

WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of creative and innovative indivuduals working together to offer high quality, affordable ergonomic solutions. We think and work outside of the box to serve you, our customer, to the best of our abilitiy.

Need Assistance?
We Would Love to Help!

Personable Customer Support | Mon-Fri 7am-7pm
We offer immediate assistance with rapid response times from customer service agents and product techncians to help you every step of the way!

Call Us: 309-278-5303
Average Resolution Time: 5m 4s
Chat Us: www.vivo-us.com
Average Resolution Time: < 15m
Email Us: help@vivo-us.com
Average Resolution Time: 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within <2hr
92% within < 3hr

LOVE YOUR NEW VIVO SETUP?
Ready to share that new amazing
setup? Want to brag about that
amazing new ergonomic solution?
Tag us in your photo!

FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
LAST UPDATED: 07/20/2022
REV1.1LF