VIVO MOUNT-KB05HW White Clamp On Height Adjustable Keyboard Tray Instruction Manual
- October 27, 2023
- Vivo
Table of Contents
VIVO MOUNT-KB05HW White Clamp On Height Adjustable Keyboard Tray
SKU: MOUNT-KB05HW
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product. https://vivo-
us.com/products/mount-kb05hw.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST
-
www.vivo-us.com
Chat live with an agent! -
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Assemble slider brackets (B) to the support brackets (D) using M4x7 screws
(F). Tighten with a Phillips screwdriver.
NOTE:
The clamp can be offset using the extra holes in slider brackets (B) to allow
the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this
way the tray will sit further out from the desk edge.
STEP 2
Assemble slider brackets (B) with support brackets (D) to the keyboard tray
(A) using M5x12 screws (G), and tighten them with a Phillips screwdriver. The
support brackets (D) must be on the opposite end of the center cable guide.
STEP 3
Assemble clamps (C) to support brackets (D) at the desired height using M5x8
screws (H). Tighten with a Phillips screwdriver.
STEP 4
Place pads (E) on the underside of each clamp. Place assembled keyboard mount
on edge of the desk and tighten the clamps. NOTE: To ensure the keyboard tray
is level, do not over-tighten clamps. Slide the keyboard tray forward/back to
the desired position.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us.
Open Monday – Friday 7:00 am – 7:00 pm CST
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M.
- 309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>