VIVO STAND-TDML4 Height Adjustable Laptop Desk for Treadmill Instruction Manual
- October 30, 2023
- Vivo
Table of Contents
VIVO STAND-TDML4 Height Adjustable Laptop Desk for Treadmill
Product Information
The Height Adjustable Laptop Desk for Treadmill is a mount designed for use while walking. The package includes two crossbars, one center brace, one adjustment bracket, one center pole, two keyboard tray, one support plate, two wrist pad, one mouse pad, and necessary screws and tools. The product has a weight capacity of 8.8 lbs (4kg).
Product Usage Instructions
- Remove the thumbscrews and end caps from the center brace, and insert the brace into the adjustment bracket.
- Insert the previously removed end caps into the crossbars, and slide the crossbars into the center brace.
- Reinsert the previously removed thumbscrews back into the center brace.
- Assemble the support plate to the center pole using an M8x60 mm screw and 6mm Allen wrench.
- Mount the keyboard trays to the support plate using barrel nuts and screws, and a Phillips screwdriver.
- Remove the adhesive backing from the wrist pads and place them on the front edge of the keyboard trays.
- Loosen the knob on the back of the adjustment bracket, and insert the center pole into the adjustment bracket.
- Loosen the thumbscrews on the center brace.
- Adjust crossbars to fit the treadmill, and then retighten the thumb screws in a center brace to secure it in place. Tightly fasten the mount to the treadmill’s handlebars using the straps on each side of crossbars. Place mouse pad on the tray assembly.
- Set the tray assembly at the desired height and tighten the knob on the back of the adjustment bracket to secure it in place.
- Loosen the adjustment knob on top of the adjustment bracket to center the tray assembly. Once the assembly is in the desired location, retighten the knob.
WARNING : This mount is not suitable for children under 3 years. Adult
supervision is required. Do not attempt to run while using a laptop, as this
may lead to serious injury. Failure to adhere to weight capacity may result in
serious injury.
If any parts are received damaged or defective, please contact the
manufacturer for assistance.
Contact Information:
- Email: [email protected]
- Phone : 309-278-5303
- Website : www.vivo-us.com
SKU : STAND-TDML4
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/stand-tdml4
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST
- [email protected]
- www.vivo-us.com Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING : CHOKING HAZARD SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED
WARNING THIS MOUNT IS INTENDED FOR USE WHILE WALKING. DO NOT ATTEMPT TO
RUN WHILE USING LAPTOP, AS THIS MAY LEAD TO SERIOUS INJURY.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury
TOOLS NEEDED
ASSEMBLY STEPS
-
STEP 1
Remove the Thumbscrews (B1) and End Caps (B2) from Center Brace (B), and insert the brace into Adjustment Bracket (C).
-
STEP 2
Insert the previously removed End Caps (B2) into Crossbars (A), and slide the crossbars into Center Brace (B).
-
STEP 3
Reinsert the previously removed Thumbscrews (B1) back into Center Brace (B ).
-
STEP 4
Assemble Support Plate (F) to Center Pole (D) using M8x60mm Screw (S-A) and 6mm Allen Wrench (T-A).
-
STEP 5
Separate Barrel Nut (S-B1) and Screw (S-B2) from the M5x10mm Screw with Barrel Nut (S-B), using a Phillips screwdriver, as shown. Mount Keyboard Trays (E) to Support Plate (F) using Barrel Nuts (S-B1) and Screws (S-B2) and a Phillips screwdriver.
-
STEP 6
Remove the adhesive backing from Wrist Pads (G) and place them on the front edge of Keyboard Trays (E).
-
STEP 7
Loosen the knob on the back of the Adjustment Bracket (C). Then insert Center Pole (D) into Adjustment Bracket (C).
-
STEP 8
Loosen the thumbscrews on Center Brace (B).
-
STEP 9
Loosen the thumbscrews on Center Brace (B).
Adjust Crossbars (A) to fit the treadmill and then retighten the thumbscrews in Center Brace (B) to secure it in place. Tightly fasten the mount to the treadmill’s handlebars using the straps on each side of Crossbars (A). Place Mouse Pad (H) on the tray assembly.
-
STEP 10
Set the tray assembly at the desired height and tighten the knob on the back of the Adjustment Bracket (C) to secure it in place.
-
STEP 11
Loosen the adjustment knob on top of the Adjustment Bracket (C) to center the tray assembly. Once the assembly is in the desired location, retighten the knob
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 07/22/2022 REV2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M Chat live with an agent!
- [email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Height Adjustable 27" Laptop Desk for Treadmill – VIVO - desk solutions, screen mounting, and more