vivo MOUNT-PLAY1B Dual Wall Mount Designed for Sonos One Instruction Manual
- October 27, 2023
- Vivo
Table of Contents
vivo MOUNT-PLAY1B Dual Wall Mount Designed for Sonos One Instruction Manual
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure,
please contact us at vivo-us.com, email at help@vivo-
us.com, or call us at 309-278-5303.
ASSEMBLY STEPS
STEP 1
Separate the Mount (A) into the wall bracket and support.
STEP 2
OPTION A: Wood Stud Installation
Use the wall bracket to mark mounting holes on the wall where a stud is
located. Use of a stud finder and level is recommended. Drill 2.2” (55mm) deep
holes using a 5/32” (4mm) drill bit. Secure the wall bracket using Wall Screws
(E) and press the Cover (C) into place.
OPTION B:Brick/Concrete Wall Installation
Use the wall bracket to mark mounting holes on the wall where a stud is
located. Use of a level is recommended. Drill 2.4” (60mm) deep holes using a
5/16” (8mm) drill bit and press Anchors (D) into the holes. Secure the wall
bracket using Wall Screws (E) and press theCover (C) into place.
STEP 3
Route the speaker power cable through the slot in the support, and place
the speaker on the support. Mount Support Bracket (B) using Flat Head Screw
(G) at a slight angle with a Phillips screwdriver.
Note: As you tighten Flat Head Screw (G), Support Bracket (B) will
straighten out applying pressure to the speaker. Do not over tighten.
STEP 4
Place the support with speaker on the wall bracket, and secure using the
pan head screw (F) and a Phillips screwdriver. Adjust tilt support using the
Allen wrench (H).
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303: AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!: AVG. RESOLUTION TIME (within office hrs): < 15
M
help@vivo-us.com: AVG. RESPONSE TIME (within office hrs): 1HR 8M
- – 23% within < 15m
- – 38% within < 30m
- – 61% within < 1hr
- – 83% within < 2hr
- – 92% within < 3hr
Support
SKU: MOUNT-PLAY1B
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-us.com/products
/mount-play1b
GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent
309-278-5303
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Dual Wall Mount Designed for Sonos One, SL, and Play:1 – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>