Trudian 20240627 Access Control Device User Manual
- July 15, 2024
- Trudian
Table of Contents
Trudian 20240627 Access Control Device User Manual
1. Installation diagram
Image 1-1 Installation diagram
The device is installed at a height of about 1.45 meters from the ground.
Fix the bracket on the wall. Align the device with the bracket buckle and use
anti-theft screws to install it.
Image 1-2 Installation steps
Installation steps:
- After determining the installation height, use screws to fix the bracket on the wall.
- Align the device with the mounting buckle of the bracket and pull it down into the installation position.
- Install anti-theft screws on the bottom of the device to fix the device and the bracket.
Notice:
- Do not expose device to wind and rain. If it cannot be avoided, please install a rain cover.
- Do not expose the camera to direct sunlight or strong light.
- Try to keep the light of the camera even.
- Do not install near strong magnetic fields.
- Do not install it where the background noise is greater than 70dB.
- Non-professionals are not allowed to disassemble the equipment for maintenance.
2. Operation Instructions
Main UI:
Image 2-1 Main UI
2.1. Configuration instructions
2.1.1. Set network parameters
When using it for the first time, you need to configure the network parameters of the device. If the device room number is set successfully, the device will obtain the corresponding IP address according to the configuration table. The network parameters of the device can also be set through Set it up as follows.
2.2. Opening instructions
The device supports a variety of door opening methods: card opening, password
opening, face recognition opening and remote opening. After the door is opened
successfully, the door station will display a prompt box indicating that the
door is opened successfully and accompanied by a voice prompt.
2.2.1. Swipe card to open the door
Place the added legal IC card in the card swiping area of the door machine to
open the door. For the operation of adding a card, see 3.6 System Settings –
Card Management.
2.2.2. Password to open the door
Explanation:
Public password unlocking
Enabled by default, initial password: 668899.
The public hijacking password to unlock the door
The public hijacking password (initial password: 998866) is in reverse order
of the public password. No settings are required. It is automatically
generated and can only be used when the public password unlocking is enabled.
For example: the public unlocking password is 123456, and the hijacking unlocking password is 654321. When the hijacking password is used to unlock, the door machine will alarm the management center and notify the management center that someone is being held hostage at the door.
User password to unlock
It is closed by default, and the administrator needs to enable the permission
through system settings. For specific operations, see 3.6 System Settings –
Advanced Settings, and the resident needs to set it on the indoor unit before
it can be used. After enabling it, just enter the corresponding room number
and password. The user password can be unlocked with the public password
unlocking is used at the same time.
User hijacking password to unlock the door
User hijacking password unlocking is related to the authority of user password
unlocking. When user password unlocking is set, the user hijacking password is
automatically generated in reverse order.
2.2.3. Face recognition opens the door
Face registration:
3. System settings
Image 3-1 System settings
3.1. User Management
3.2. Access Control Settings
3.3. System Maintenance
3.4. Facial Recognition
3.5. Communication Settings
3.6. System Settings
Explanation:
Add card: After inputting the room number where the card needs to be
Explanation:
Add elevator: Select elevator server management, click “Add Elevator”, and
input the device located floor number, the elevator IP address, number and
starting floor.
Delete elevator: Select elevator server management, select the elevator to be
deleted and delete it according to the prompts.
7. Restore factory settings: After clicking to restore factory settings, the
device will clear all settings.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>