LUMASCAPE ERDEN E6 LS3060 User Guide

: June 4, 2024
: LUMASCAPE

Table of Contents

LUMASCAPE ERDEN E6 LS3060
Specifications
Tools Required
Included Components
Assembly Instructions
Optional Glare Control Accessories
Wiring Designations
Dimensions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUMASCAPE ERDEN E6 LS3060

LUMASCAPE ERDEN E6 LS3060 product-img

Carefully. Failure to do so will void the warranty.

WARNING – Product Warranty is void if the product is not installed as per installation instructions and in compliance with all local and provincial codes.

Ensure installation complies with local electrical rules and regulations.
All electrical work must be performed by a licensed electrician.
Protective earth; protective ground (symbol 7).
All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting the luminaire as it may become hot. Luminaire should only be used complete with a protective shield. If the protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (symbol 10).
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
The light source contained in this luminaire shall only be replaced by Lumascape or their service agent.
Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 26’ (8 m) is not expected (symbol 13)
Basic insulation has been maintained between line voltage and the control conductors.
To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within
arm’s reach.
Ensure mains input power is surge protected.
Never make or break connections while the circuit is energized.
Do not make modifications or alter the product.
Keep luminaire clean and free of debris.
Only clean with warm water.
Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
Connections are to be kept clean and dry at all times.
Suitable for use indoors or outdoors.

Specifications

MODEL LS3060
PART NUMBER LS3060 – 25D xxx x x xx xx 21 x 01 PS
LS3060 – 25D xxx x x xx xx 21 x 09 PS
INSTALLATION TYPE INGROUND/IN-GRADE
IP RATING IP66/67 (Passes IP68 Test)
SUPPLY VOLTAGE 220-240 ~Vac, 50 Hz 120-277 ~Vac, 60 Hz
INSTRUCTIONS COVER Single Color
Dynamic Color (PowerSync)
DIMENSIONS ( LxWxH) 9.4″ x 7.1″ (240 x 180 mm)
WEIGHT 8.8 lbs (4.0 kg)
SURFACE TEMPERATURE < 149 ºF (65 ºC)
STATIC LOAD RATING 9,259 lbs (4,200 kg)

Tools Required

Included Components

$LUMASCAPE ERDEN E6 LS3060 fig $2$$

CAUTION Risk of Electric Shock ATTENTION Risque d’électrocution ATTENZIONE Rischio di scosse elettriche VORSICHT Stromschlaggefahr FORSIGTIG Risiko for elektrisk stød PRECAUCIÓN Riesgo de descarga eléctrica

Caution