Trudian TD-S1224GF Non-POE Switch User Guide
- June 12, 2024
- Trudian
Table of Contents
Trudian TD-S1224GF Non-POE Switch
Product Usage Instructions
- Connect the TD-S1224GF switch to a power source using the AC100-240V input voltage.
- Connect your devices to the switch using the appropriate RJ45 ports. Make sure to use the correct type of Ethernet cable based on the transmission requirements (10BASE-T, 100BASE-TX, or 1000BASE-T).
- For uplink connections, use the 1000Base-X SFP uplink optical ports and insert the corresponding SFP modules.
- Ensure that the devices connected to the switch support automatic detection and MDI/MDI-X adaptive functionality for proper network communication.
- The switch operates in a store-and-forward forwarding mode, providing full wire speed transmission.
- Monitor the power indicator (PWR) to ensure that the switch has a stable power supply.
- Check the port status indicator (Link/Act) to verify the working status of each port. The green LED indicates an active connection.
- The TD-S1224GF switch has a metal casing for stability and heat dissipation. Ensure proper ventilation around the switch for optimal performance.
- The switch is designed to be plug and play, eliminating the need for complex configuration. It is ready for immediate use.
- Refer to the user manual for additional information on advanced features and troubleshooting, if required.
Product Description
TD-S1224GF series is a self-developed unmanaged full Gigabit Ethernet security switch, equipped with 24 Gigabit adaptive electrical ports + 2 Gigabit SFP uplink fiber slots. The photoelectric combination interface allows customers to realize convenient connection and expansion of the network without being affected by the transmission medium. Optimizing the large backplane, large cache switching chip solution, improving the forwarding rate of large files, and effectively solving the problems of video freeze and picture loss in the high-definition monitoring environment. It is suitable for hotels, banks, campuses, factory dormitories and small and medium-sized enterprises to form cost-effective networks. Non-network management model, plug and play, no need to configure, easy to use.
Features
Full Gigabit rate, high-speed transmission
- The whole series supports the combination of “Gigabit Ethernet port + Gigabit optical port”, which is convenient for users to network flexibly and meet the networking needs of various scenarios;
- All ports support non-blocking wire-speed forwarding for smoother transmission.
- Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
Equipment is stable and reliable
- The host has low power consumption, active fan heat dissipation design, and metal casing to ensure stable operation of the product.
- Adopt self-developed power supply and high redundancy design to provide long-term stable power output.
- The equipment meets the national CCC standard, fully complies with CE, FCC, and RoHS safety regulations, and is safe and reliable to use.
Simple operation
- Plug and play, no need to configure, simple and convenient.
- Users can easily understand the working status of the device through the power indicator (PWR) and port status indicator (Link/Act).
Product Specification
| Model | XW- S1216GF | XW- S1224GF |
|---|
port characteristics
Fixed Port
| 16 10/100/1000Base-TX RJ45 ports (Data) 2 1000Base-X SFP uplink optical port
slots (Data)
| 24 10/100/1000Base-TX RJ45 ports (Data) 2 1000Base-X SFP uplink optical port slots
(Data)
Network port characteristics| 10/100/1000Base-T automatic detection, full/half
duplex MDI/MDI-X adaptive
Twisted pair transmission| 10BASE-T：Cat3,4,5 UTP(≤100 meter)
100BASE-TX：Cat5 or later UTP(≤100 meter) 1000BASE-T：Cat5e or later UTP(≤100 meter)
Chip parameters
Network protocol| IEEE802.3 10BASE-T； IEEE802.3i 10Base-T； IEEE802.3u 100Base-
TX；
IEEE802.3ab 1000Base-T； IEEE802.3z 1000Base-X；IEEE802.3x
forwarding mode| Store-and-forward (full wire speed)
Backplane Bandwidth| 48Gbps (non-blocking)| 52Gbps (non-blocking)
Packet forwarding rate@64byte| 26.78Mpps| 38.69Mpps
MAC address table| ****
8K
packet| 4M
LED indicator| Power indicator: PWR (green); Data indicator: Link/Act (green)
---|---
power characteristics
Total power/input voltage| 30W （AC100-240V）
power consumption| Standby power consumption: <6W; full
load power consumption: <12W
| Standby power consumption: <8W; full
load power consumption: <15W
power supply| Built-in switching power supply, AC: 100～240V 50-60Hz 0.56A
Physical Specifications
Working temperature/hum idity| ****
-20～+55°C; 5%～90% RH non-condensing
storage temperature/hum
idity
| -40～+75°C; 5%～95% RH non-condensing
Appearance size (LWH)| 29020045mm
Net weight/Gross weight| ＜1.0kg / ＜1.5kg
installation method| Desktop, rack mount
Product Certification
Lightning Protection/Prote ction Level| Port lightning protection: 4KV 8/20us;
Protection class: IP30
Certification| 3C；
CE mark, commercial；CE/LVD EN60950； FCC Part 15 Class B；RoHS；
Model
| ****
Device information
| Standard
Power Supply
---|---|---
TD-S1216GF
| Unmanaged 16 10/100/1000M RJ45 ports + 2 1000M SFP fiber
slots, Ethernet security switch, built-in power supply, desktop and rack installation.
| ****
30W
TD-S1224GF
| Unmanaged 24 10/100/1000M RJ45 ports + 2 1000M SFP fiber slots, Ethernet security switch, built-in power supply, desktop and
rack installation.
| ****
30W
Contact
- HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
- Phone: +86 0760 – 23689666
- E-mail: sales@trudian.com
- If the problem is not solved properly,please send the mail to: support@trudian.com
- www.trudian.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>