Trudian TD-S1216GF Non-POE Switch User Guide
- June 12, 2024
- Trudian
Table of Contents
Trudian TD-S1216GF Non-POE Switch
Product Information
- Model: TD-S1216GF
- Product Description: 18-port full Gigabit Ethernet security switch
Product Features:
- Full Gigabit rate, high-speed transmission
- Stable and reliable operation
- Simple operation
Port Characteristics:
- Fixed Port: 16 10/100/1000Base-TX RJ45 ports (Data) and 2 1000Base-X SFP uplink optical port slots (Data)
- Network Port Characteristics: 10/100/1000Base-T automatic detection, full/half duplex MDI/MDI-X adaptive
Product Usage Instructions
- Connect the TD-S1216GF switch to your power source using the provided AC100-240V power cable.
- Connect your network devices (computers, printers, etc.) to the 16 10/100/1000Base-TX RJ45 ports (Data) on the switch using Ethernet cables.
- If you need to connect devices using optical ports, insert the corresponding SFP modules into the 2 1000Base-X SFP uplink optical port slots (Data) on the switch.
- Ensure that all connected devices support the appropriate network protocols (IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x) for seamless communication.
- Power on the switch and wait for the power indicator (PWR) to turn green, indicating that the switch is powered on.
- Check the port status indicators (Link/Act) for each connected device. A green light indicates an active connection, while no light indicates no connection or a disabled port.
- The TD-S1216GF switch is plug and play, so there is no need for any additional configuration. It will automatically detect and adjust to the appropriate transmission speed (10/100/1000Base-T) and duplex mode (full/half).
- Monitor the LED indicators for any changes in power status or data activity.
- To power off the switch, simply disconnect the power cable from the power source.
- For any troubleshooting or further assistance, please refer to the user manual or contact our customer support.
Product Description
TD-S1216GF series is a self-developed unmanaged full Gigabit Ethernet security switch, equipped with 16 Gigabit adaptive electrical ports + 2 Gigabit SFP uplink fiber slots. The photoelectric combination interface allows customers to realize convenient connection and expansion of the network without being affected by the transmission medium. Optimizing the large backplane, large cache switching chip solution, improving the forwarding rate of large files, and effectively solving the problems of video freeze and picture loss in the high-definition monitoring environment. It is suitable for hotels, banks, campuses, factory dormitories and small and medium-sized enterprises to form cost-effective networks. Non-network management model, plug and play, no need to configure, easy to use.
Product Features
Full Gigabit rate, high-speed transmission
- The whole series supports the combination of “Gigabit Ethernet port + Gigabit optical port”, which is convenient for users to network flexibly and meet the networking needs of various scenarios;
- All ports support non-blocking wire-speed forwarding for smoother transmission.
- Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
Equipment is stable and reliable
- The host has low power consumption, active fan heat dissipation design, and metal casing to ensure stable operation of the product.
- Adopt self-developed power supply and high redundancy design to provide long-term stable power output.
- The equipment meets the national CCC standard, fully complies with CE, FCC, and RoHS safety regulations, and is safe and reliable to use.
Simple operation
- Plug and play, no need to configure, simple and convenient.
- Users can easily understand the working status of the device through the power indicator (PWR) and port status indicator (Link/Act).
Product Specification
Model | TD-S1216GF | TD-S1224GF |
---|
port characteristics
Fixed Port
| 16 10/100/1000Base-TX RJ45 ports (Data) 2 1000Base-X SFP uplink optical port
slots (Data)| 24 10/100/1000Base-TX RJ45 ports (Data) 2 1000Base-X SFP uplink
optical port slots (Data)
Network port
characteristics
| ****
10/100/1000Base-T automatic detection, full/half duplex MDI/MDI-X adaptive
Twisted pair transmission
| 10BASE-T:Cat3,4,5 UTP(≤100 meter)
100BASE-TX:Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter)
Chip parameters
Network protocol
| IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;
IEEE802.3x
forwarding mode| Store-and-forward (full wire speed)
Backplane
Bandwidth
| ****
48Gbps (non-blocking)
| ****
52Gbps (non-blocking)
Packet forwarding
rate@64byte
| ****
26.78Mpps
| ****
38.69Mpps
MAC address
table
| ****
8K
packet
forwarding cache
| ****
4M
jumbo frame| 10Kbyte
power characteristics
Total
power/input voltage
| ****
30W (AC100-240V)
power
consumption
| Standby power consumption: <6W; full
load power consumption: <12W
| Standby power consumption: <8W; full
load power consumption: <15W
power supply| Built-in switching power supply, AC: 100~240V 50-60Hz 0.56A
Physical Specifications
Working temperature/hum
idity
| ****
-20~+55°C; 5%~90% RH non-condensing
storage temperature/hum
idity
| ****
-40~+75°C; 5%~95% RH non-condensing
Appearance size
(LWH)
| ****
29020045mm
Net weight/Gross
weight
| ****
<1.0kg / <1.5kg
installation method
| ****
Desktop, rack installation
Product Certification
Lightning Protection/Prote
ction Level
| ****
Port lightning protection: 4KV 8/20us; Protection class: IP30
Certification
| 3C;
CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS;
Model | Device information | Standard Power Supply |
---|---|---|
TD-S1216GF | Unmanaged 16 10/100/1000M RJ45 ports + 2 1000M SFP fiber |
slots, Ethernet security switch, built-in power supply, desktop and rack installation.| ****
30W
TD-S1224GF| Unmanaged 24 10/100/1000M RJ45 ports + 2 1000M SFP fiber slots, Ethernet security switch, built-in power supply, desktop and rack installation.| ****
30W
Contact
- HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
- Phone: +86 0760 – 23689666
- E-mail: sales@trudian.com
- If the problem is not solved properly,please send the mail to: support@trudian.com
- www.trudian.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>