Trudian D2ICR88-TY 2 Wire IP Video Intercom Kit User Manual

Trudian D2ICR88-TY 2 Wire IP Video Intercom Kit User Manual

Specifications

Description and Dimensions

Installation Schematic

Install the outdoor phone at a height of 1.4~1.7m above the ground, avoiding sun and rain as much as possible. Fixed to wall, board, door with 2 screws or adhesive tape, also can be installed on the 86 box.

1. Drill holes for passing through the 4-core cable, it connects the outdoor phone and indoor monitor, interconnecting audio and video.

2. Remove the screws of the waterproof cover with a hexagonal screwdriver.

3. Separate waterproof cover and outdoor phone.

4. Pass the 4-core wire through the hole in the wall.

5. Secure the waterproof cover with two screws.

6. Put the outdoor phone in a waterproof cover and fixes the bottom screw.

7. Screw the wall bracket for fixing the indoor monitor.

8. Connect the other end of the 4-core cable to Door1 or Door2 of the indoor monitor.

9. Connect 12V 2A power supply to the indoor monitor.

10. Hang the indoor monitor on the wall bracket.

Connect the outdoor phone and indoor monitor

Connect lock schematic

Note: The electric lock does not distinguish between positive and negative, unlocking voltage 12V, please check the electric lock unlocking power specifications purchased separately, the latch delay time please set in the indoor host.

Introduction to indoor monitor operation

1. Tap the screen to enter the settings screen.

System Settings:

Device number: The indoor monitor connected to the outdoor phone is set to 1, and the extensions are numbered 2, 3, 4, 5, 6 in that order.

Outdoor Phone Settings:

Note: The following settings are configured on the host, the extensions are synchronized with the host settings.

Please check whether Door1 or Door2 is connected, or whether there are two outdoor phones connected.

Network settings:

(configured on the Host, not supported by extensions)

The indoor monitor connects to WiFi, supports EZ Mode and AP Mode, check “ 9 Adding Devices ” below for details.

Advanced Settings:

Format SD card, factory settings, software upgrade, system reboot

System Information:

Software version, release date, SD space left, UUID

2. Click “Monitor” or press the outdoor phone to call over the interface.

3. Click “Transfer call” to call other indoor monitors, which is equivalent to internal call.

4. Click “Record” to display call records, message records, motion detection records, you can view pictures or Long press the record file to delete, delete all, read all.

5. Click “Home” mode to switch 3 modes, the indoor monitor should be inserted TF card, and turn on the message switch.

➀ At home: After the visitor presses the doorbell, the indoor monitor will ring and the phone will receive the notification, click on the notification and answer, if there’s no answer, the visitor will be prompted to leave a message.

➁ Not at home: After the visitor presses the doorbell, the mobile phone APP will receive the notification, click the notification and answer.

➂ Sleep: When the visitor presses the doorbell, the outdoor phone and indoor monitor will not ring or beep, and the mobile phone APP will receive the notification, you can answer by clicking the notification.

Download and install the App

1. Android system in the Mobile Assistant to download, iPhone, iPad search in App Store to download “Tuya Smart” or “Smart Life”.
2. Scan the QR code to download the App

Register Account and Login

1. For the first time to use “Tuya Smart” or “Smart Life” App, please click Register.

2. Choose your phone number or email address to authorize login. You can also authorize login via WeChat or QQ account.

3. In order to ensure the normal use of APP functions, please allow and open all permissions of APP when installing APP!

4. Logging into APP, you can create a family and then add devices. How to create a family:
   Click “My” -> “Home Management” -> “Create a Home” , fill in the information and save. The setter will default to the home owner, the owner can set the administrators and normal members. After the home owner or administrators adds a device, the home members will automatically add the device. “Tuya Smart” or “Smart Life” is a large platform, you can add many kinds of smart products. After adding this device, all family members have an additional unlocking feature over shared accounts, and up to 20 administrators or home members can be added to a single home.

5. Video intercom is a device with high security level, you have to remove the device from the original account before you can bind it to another account.

Adding Devices

Note that only the indoor host can connect to the Tuya Smart APP, and the extensions cannot be configured.

Click “Settings” to enter “Network Settings” to enter network configuration mode.

Indoor host has two network distribution modes

1. EZ Mode
2. AP Mode

1. EZ Mode

2. AP Mode

After selecting “AP Mode”, please click “Back” icon , the indoor monitor will reboot, then go back to the network settings interface, you can see the WIFI hotspot SmartLife-XXXXXX, password is 12345678.

Note: When the APP is unbound from the device, the device will reboot and need to wait for five minutes before re-binding again (the operation can only be performed on the APP)

View Real-time Video

Click on the device to enter the real-time screen, you can switch the outdoor phone, mute, screen zoom, full screen, hover window operation, take photo, intercom, video, unlock, playback, photo album. There are two theme colors, click the Theme Color to set.

Messages: motion detection. If someone calls at the outdoor phone it will take a picture.

Motion Detection: Enables motion detection after clicking and will sends a notification when a human is detected.

Lock: Unlock and save all unlocked time records.

Edit: Click to enter the function button management interface.

The computer side of the domestic login https://protect.ismartlife.me connects to this device.

The computer side can intercom, take pictures, and record video.

Call and Motion Detection

1. Show Incoming Call after visitors press the call button

2. Push notifications in phone standby

3. Click the “Settings” icon in the upper right corner to enter the message settings

4. Click on the Motion detected will enter the Alarm.

5. Click on the  You have a visitor will enter the real-time video.
   Users can intercom, take pictures, video, and unlock the door

Help and Services

There are many Tuya smart products, users can click “My” to enter the services and help.

1. “Third-party Voice Services”, you can choose multiple smart products to control by voice, and each third-party product has a detailed tutorial on how to connect.
2. “Home Management”, you can create a home or join a home and set permissions.
3. Click on the “Message Center” to view alarm information.
4. Familiar with the use of APP, Device Operation, etc. can be viewed in the “FAQ & Feedback”.

Packing List

Outdoor Phone part

Indoor Monitor part

Documents / Resources

| Trudian D2ICR88-TY 2 Wire IP Video Intercom Kit [pdf] User Manual
D2ICR88-TY 2 Wire IP Video Intercom Kit, D2ICR88-TY, 2 Wire IP Video Intercom Kit, IP Video Intercom Kit, Video Intercom Kit, Intercom Kit
---|---

References

• protect.ismartlife.me

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>