Clore Automotive LNC1241 Light-N-Carry COB LED Rechargeable Work Light Owner’s Manual

June 12, 2024
Clore Automotive

Clore Automotive LNC1241 Light-N-Carry COB LED Rechargeable Work Light

Clore-Automotive-LNC1241-Light-N-Carry-COB-LED-Rechargeable-Work-Light-
PRODUCT

Product Information

The COB LED Rechargeable Work Light is a versatile lighting tool designed for various applications. It features a sealed lithium  battery that should be kept at full charge to ensure optimalperformance. The work light comes with several safety features, including eye protection, appropriate protective clothing, and other safety equipment. It also has multiple settings, a micro USB charging port, a state of charge/charging status LED indicator, a magnet, and a hook for convenient usage. The package includes a USB/micro USB charging cord and an AC wall charger with a USB port.

Product Usage Instructions

  1. Before using the work light, read the entire instruction manual to familiarize yourself with its features and precautions.
  2. Ensure you have the necessary safety equipment, including eye protection and appropriate protective clothing.
  3. Charge the work light’s battery when first received, immediately after each use, and every six months if not used. Use the provided USB/micro USB charging cord and AC wall charger.
  4. To turn on/off the work light, use the ON/OFF power button located on the device.
  5. The work light offers two settings: COB LED work light and SMD LED focus beam light. Select the desired setting based on your lighting needs.
  6. Use the magnet or hook to securely attach the work light to various surfaces for hands-free operation.
  7. Monitor the state of charge/charging status using the LED indicator.
  8. When working within the engine compartment of a vehicle, exercise extreme caution due to moving parts. Refer to the vehicle’s owner’s manual for additional safety instructions.
  9. After use, disconnect the work light from the charger and wipe any dirt or oil using a dry cloth.
  10. Store the work light in a safe place following the provided storage instructions.
  11. If any issues arise with the work light, contact Technical Service at 913-310-1050, and have your purchase receipt ready for warranty service.

WARNING : Failure to follow instructions may cause damage or explosion, always shield eyes. Read entire instruction manual before use.

WARNING: This product can expose you to chemicals including Vinyl- Chloride, Styrene and Acrylonitrile, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov.

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.

This manual will explain how to use the work light safely and effectively. Please read and follow these instructions and pre- cautions carefully. In the rare event that your work light contains a damaged or missing item, does not perform as specified, or requires warranty service, please call Technical Service at 913-310-1050. Save your purchase receipt, it is required for warranty service.  This unit has a sealed lithium battery that should be kept at full charge. Recharge when first received, immediately after each use, and every six months if not used. Failure to perform maintenance charges may cause the battery life to be reduced greatly.

WARNING

  • Read these instructions completely before using the Light-N-Carry and save them for future reference. Be- fore using the Light-N-Carry to jump start a car, truck, boat or to power any equipment, read these instruc- tions and the instruction manual/safety information provided by the car, truck, boat or equipment manu- facturer. Following all manufacturers’ instructions and safety procedures will reduce the risk of accident.
  • Always wear eye protection, appropriate protective clothing and other safety equipment when working on vehicles or other equipment.
  • Use extreme care while working within the engine compartment, because moving parts may cause severe injury. Read and follow all safety instructions published in the vehicle’s Owner’s Manual.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for Model Nos. LNC1241, LNC1341 and LNC1541. Read, understand and follow all instructions, cautions and warnings listed in this manual. Failure to follow all instructions could result in per- sonal injury, injury to others and property damage.

  • IMPORTANT! Charge work light immediately after purchase, after each use, and at least every 3 months when not in use.

  • DO NOT turn on the work light while it is being charged.

  • DO NOT handle or move the work light while it is being charged.

  • DO NOT look directly into the light or shine the light directly into the eyes of any person or animal.

  • DO NOT allow children to use the work light.

  • DO NOT operate the work light if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.

  • DO NOT allow the unit’s battery to stay in a discharged state for long periods of time. This has a detrimental effect on battery life.
    AC CHARGER FOR INDOOR USE ONLY.

  • DO NOT expose the charger to water or use in damp conditions.

  • WARNING! Do not use any other charger except the one provided to charge the work light. Use of a charger not supplied by the manufacturer may result in a risk of fire, injury to persons and/or damage to property.

  • DO NOT use the work light with a charger which has a dam- aged cord or plug. Replace the cord or plug immediately.  To reduce the risk of damage to the charger plug, pull by the plug, rather than the cord, when disconnecting the charger.

  • DO NOT use the provided charger to charge or power any other electrical item.

PERSONAL SAFETY PRECAUTIONS

  • DO NOT disassemble the work light; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire.
  • DO NOT expose to temperatures above 140˚F (60˚C).  Recycle or dispose of the used battery as required by local regulations.

FEATURES

  • ON/OFF Power Button
  • COB LED Work Light with 2 Settings
  • SMD LED Focus Beam light
  • MicroUSB Charging Port
  • State of Charge / Charging Status LED Indicator
  • Magnet
  • Hook
  • USB/Micro USB Charging Cord
  • AC Wall Charger with USB Port

CHARGING

NOTE: CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE, AFTER EACH USE, AND AT LEAST EVERY 3 MONTHS WHEN NOT IN USE. Failure to do this will reduce the battery’s useful life.

  • Connect the microUSB end of the charging cable to the microUSB port on the work light. Connect the USB end of the charging cable to the USB port of the AC charger. Plug the AC charger into a functioning AC outlet.
  • The blue state of charge / charging status LEDs will blink in succession to indicate charging progress. To reach full charge, continue charging until all four LEDs are lit solid.
  • Charging will take approximately 4 hours, depending on the unit’s state of charge at the start of the cycle.
  • The charging process is fully automatic and the light can remain connected to the charger indefinitely without adverse consequences

OPERATING INSTRUCTIONS

Do not turn on the work light while it is being charged.  Direct the lens away from your eyes before turning on the work light.  Press the POWER button to achieve the operational mode desired:

  • Press POWER for COB Work Light low brightness
  • Press POWER a second time for COB Work Light high brightness
  • Press POWER a third time for Focus Beam Light
  • Press POWER a fourth time to turn the unit

The unit incorporates a rotating arm with an integrated mag- net in its base for ideal positioning, allowing it to be attached to any ferrous metal surface. The unit incorporates a hook to allow it to be hung for ideal positioning. Recharge the work light after use, and at least every 3 months when not is use.

MAINTENANCE INSTRUCTIONS

  • After use and before performing maintenance, disconnect the work light from the charger.
  • Use a dry cloth to wipe any dirt or oil from the charger, cord and light.
  • Any servicing should be performed by qualified service personnel.

STORAGE INSTRUCTIONS

  • Store inside, in a cool, dry place.
  • Take care to avoid/prevent damage to the charger, cord and unit. Failure to do so could result in personal injury or property damage.
  • Charge the work light’s internal battery immediately after purchase, after use and every 3 months when not in use.
  • All batteries are affected by temperature. The ideal storage temperature is 70˚F. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a discharged state may result in shorter than expected battery life.

REPLACEMENT PARTS

Charger replacement kit (includes wall charger and USB/microUSB cable) – PART NO. LNC215

LIMITED WARRANTY

Clore Automotive warrants this product to be free from defects in material or workmanship for a period of one year from the date of original end user purchase. This warranty extends to each person who acquires lawful own- ership within one year of the original retail purchase, but is void if the product has been abused, altered, misused or improperly packaged and damaged when returned for repair. This warranty applies to the product only and does not apply to any accessory items included with the product, which are subject to wear from usage. Accessories include, but are not limited to, wall chargers, charging cables and hooks. The replacement or repair of these items shall be at the expense of the owner.

THE TERMS OF THE CLORE AUTOMOTIVE LIMITED WAR- RANTY CONSTITUTE THE BUYER’S SOLE AND EXCLUSIVE REMEDY. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THIS EXPRESS WARRANTY. AFTER 1 YEAR FROM DATE OF PURCHASE, ALL RISK OF LOSS FROM WHAT- EVER REASON SHALL BE PUT UPON THE PURCHASER.  CLORE AUTOMOTIVE SHALL NOT BE LIABLE FOR INCIDEN- TAL AND CONSEQUENTIAL DAMAGES UNDER ANY CIRCUM- STANCES: CLORE AUTOMOTIVE’S LIABILITY, IF ANY, SHALL NEVER EXCEED THE PURCHASE PRICE OF THIS PRODUCT REGARDLESS OF WHETHER LIABILITY IS PREDICATED UPON BREACH OF WARRANTY (EXPRESS OR IMPLIED), NEGLIGENCE, STRICT TORT OR ANY OTHER THEORY.

Some states do not permit the limitation of warranties or limitation of consequential or incidental damages, so the above disclaimer and limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Instructions for obtaining service under this warranty:

If this product fails within the warranty period due to a defect in material or workmanship, return it to your place of purchase for an exchange.

Registering Your Purchase

For best service and to receive periodic product updates, please visit www.cloreregistration.com, click on the Light-N-Carry logo, choose your model number, complete the information in the web form and click “submit.” It’s that easy!

For answers to questions concerning use, out-of-warranty service, or warranty/service information on this or other Clore Automotive products, contact: Clore Automotive Technical Service 800.328.2921 913.310.1050

www.cloreautomotive.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Clore Automotive User Manuals

Related Manuals