Trudian TD-F2-B Smart Door Lock User Guide

Trudian TD-F2-B Smart Door Lock

Product Information

• Applicable Model: TD-F2-B
• Version: 1.0
• Date: JUNE 2023

Welcome to the future with our Smart Door Lock. With advanced technology and innovative features, this smart lock provides convenience and security for your home or office.

Contact Information

• Website: www.trudian.com/en/
• Headquarters Address: Farbell Technology Park, Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code: 528451
• Phone: +86 0760 – 23689666
• Email: [email protected]

If you encounter any issues that are not resolved by the provided instructions, please contact our support team via email at [email protected].

Product Usage Instructions

1. Install the Smart Door Lock on your door following the installation guide provided in the package.
2. Download and install the Trudian mobile app from your device’s app store.
3. Open the app and create a new account or log in if you already have an existing account.
4. Follow the on-screen instructions to add the Smart Door Lock to your app.
5. Pair your smartphone with the Smart Door Lock using Bluetooth.
6. Set up your desired lock settings, such as auto-lock, passcode options, and fingerprint recognition (if available).
7. Test the functionality of the lock by locking and unlocking it using the app or the provided physical key.
8. Ensure that you have a stable internet connection for remote access and additional features like push notifications.
9. Refer to the user manual for further details on advanced features and troubleshooting.

Note: It is recommended to change your passcode periodically to maintain security.

Accessory

Door opening direction

Adjust the mortise direction
According to the your need to adjust the mortise direction.

Switch Left Handle and Right handle

According to your opening direction, loose the screw inside the handle with a Philip screw driver, and pull out the handle, then turn to the correct direction that you want, then fix the screw inside the handle.

Accessories for sorts of door thickness
Available door thickness 35mm-70mm. If the door is over this range, please contact us for more information. Please select the correct accessories according to your door thickness.

Caution before installation

1. Do not be a strong force when installation, avoid to damaging the lock.
2. Use correct installation tools.
3. Wear glass to protect your eyes when drilling holes.
4. Drilling the door holes on both side of the door avoiding to damaging the door plate.

Installation

Installation steps:

Check points after installation

1. The face plate is horizontal with the door.
2. The Latch bolt and Dead bolt must works smoothly and flexibly.
3. The Front lock is vertical and stable.
4. Front handle works smoothly and flexibly, Dead bolt should be in position when you lift the handle.
5. Dead bolt should be in position when you lift the Back handle, and it should be retracted when you press the handle.

Intelligent lock(five in one) operation manual

1. Function and Operation

2. Description of terms and functional keys

3. Adminstrator information: refer to the Administrator’s fingerprint, password or IC card. Unlock information: refer to the input fingerprint, password ,Remote control or IC card information (including Administrator and ordinary users).

4. Key”*”: clear key/back key. Enter the password or point by clearing the previous input.Press the clear key three times in succession, empty all input.

5. Key”#”: confirmation key or menu function key.

6. Original state

7. The factory administrator orinitial password is 123456, under the orinitial state any fingerprint, IC card or password can open the lock.

8. Any fingerprint, IC card ,or password which are not registered can’t open the lock after inputting the administrator information.

9. Lock function management (step one)

10. Administrator settings

11. Add administrator (step 2)

12. Delete administrator information

13. Common user setting

14. Add User information

15. Delete user information

16. system setting

17. Voice setting

18. Unlock mode setting

19. Language settings

20. Time setting

21. Restore factory settings

22. APP Configuration (Tuya Smart) – optional

23. Search “Tuya Smart” in App Store or an App market, download and install it.

24. Register with your cellphone number and log in.

25. Click “Security &Sensor”, find “Lock(Wi-Fi)”, click and add a device following instructions before use.

26. Remote unlocking: wake up the screen and press “9”+”#”. There will be a voice prompt: requesting remote unlocking.
    Add one network

27. Press”*”+”#”to authenticate administrator identity and then press “1” to access administrator settings. Then there will be a voice prompt of pressing “3” for network configuration.

28. Voice prompt in network configuration mode: press “1” for hotspot connection and “2” for intelligent connection.

29. 3. When the network is successfully added, the 1 , 2 , 3 and 4 lights on the keyboard will be on in order with a voice prompt of “operation com[)leted”.

30. In the event of network addition failure, the 1 , 2 , 3 and 4 lights on the keyboard will not be on and there will be a voice prompt of “operation failed” upon timeout.
    Notice: Please add administrator before setting.

31. Other notes

32. Input the wrong password more than 5 times in arow, the keyboard locked for 30 seconds, it does not respond to any operations in 30 seconds.

33. Password peeping prevention function: input password as follows when opening the door with password: XXX password XXX; you can add some extraneous codes before and after the password, and then press# to confirm. The password must be included in the input contents.

34. If there is no operation more than 10 seconds , system will automatically exit.

35. After the voltage is lower than 4.6v, the lock will automatically alarm every time when it is opened. After the alarm, the lock can be opened for about 200 times.

36. Remove the battery cover,press the “Set” key for 6 seconds,the lock was restored to factory mode;

37. In factory mode,input “333666999#” cna change the language quickly;

38. When unlocking,input “5#”to enter passage mode(One time effective);

39. When unlocking,input “*”to broadcast the user number;

Technical Parameters

Main function modules

1. APP registration and login
   • APP registration: if you do not have an APP account, you can choose to register or log inby SMS verification code.
   • Click “create a new account” to enter the account registration page. According to theprompt to obtain SMS verification code, setthe password.
   • If you have an existing account, click “login with an existing account” to log in to the APP. Password, verification code, and social account login are supported.
2. Create Homes
   • Create your home after registering and logging in successfully.
   • Each account can create and add multiple homes, and devices can be grouped by room in the home.
   • Weather and other functions depend on the geographical location of the family, which is recommended to set in advance.
3. Add WiFi lock On the Tab of “my home”, click”+” in the upper right corner to enter the interface in figure 1, select the WiFi door lock in security sensor part and enter the page in figure 2.
   • When the device enters the connected mode, continue to operate according to the instructions and APP tips.
4. Home Page
   • Home page includes remote unlock, alarm message, member management, record, temporary password and other functions.
   • Remote Unlock: initiate a request from the door lock, and the app can respond to allow/ refusal door opening
5. Dynamic password
   • Click to get the dynamic password Meanwhile copy the password text for you
6. Message center Message center contains alarm information, doorbell call information and hijacking alarm information, which can be inquired.
7. User Management
   • User can be added, deleted or changed in member management.
   • Only the administrator user of app is allowed to do that.
8. Record Log 24/7 Record Log, arranged in reverse chronological order. The unlocked ID with the associated user name will directly display the user name, while the unlocked ID without the associated name will display the specific unlock ID
9. Temporary password Temporary password can be created and deleted through app. After each create or delete is completed on the app, the lock hardware is required to synchronize with the server.
   • At the time of creation, you can choose whether to send SMS or not. Worldwide SMS is supported.
10. Hijacking alarm When the anti-hijacking mark in the left picture is opened, if the unlock action of the unlock ID occurs, the record will report and the app will trigger the anti-hijacking alarm
11. Factory Data Reset
    • Click the icon in the upper right corner of the main interface. Find the Factory Data Reset and click.
    • The Factory Data Reset can also be operated on the lock. Please refer to the instruction manual for details.

www.trudian.com/en/
HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
Phone: +86 0760 – 23689666
E-mail: [email protected]
If the problem is not solved properly,please send the mail to: [email protected]

References

• Home - Guangdong Trudian Technology Co., Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>