Trudian TD-S1008G Non-POE Switch User Guide
- June 12, 2024
- Trudian
Table of Contents
Trudian TD-S1008G Non-POE Switch
Product Usage Instructions
- Plug the TD-S1008G switch into a power source using the provided power adapter.
- Connect your devices (computers, printers, etc.) to the switch using Ethernet cables.
- The switch supports automatic detection of network speed and duplex mode, so no configuration is required.
- Ensure that the power indicator (PWR) on the switch is lit, indicating that it is receiving power.
- Check the port status indicators (Link/Act) for each connected device. If the indicator is lit, it means the device is properly connected and active.
- You can now start using the switch to network your devices and enjoy high-speed transmission.
Product Description
TD-S1008G series unmanaged full Gigabit Ethernet security switch, with 8 Gigabit adaptive electrical ports. Optimizing the large backplane, large cache switching chip solution, improving the forwarding rate of large files, and effectively solving the problems of video freeze and picture loss in the high- definition monitoring environment. It is suitable for hotels, banks, campuses, factory dormitories and small and medium-sized enterprises to form cost- effective networks. Non-network management model, plug and play, no need to configure, easy to use.
Features
Full Gigabit rate, high-speed transmission
- Support full Gigabit Ethernet port, high-speed, fast transmission, convenient for users to network flexibly, and meet various high-definition networking needs;
- All ports support non-blocking wire-speed forwarding for smoother transmission.
- Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
Equipment is stable and reliable
- The host has low power consumption, active fan heat dissipation design, and metal casing to ensure stable operation of the product.
- Adopt self-developed power supply and high redundancy design to provide long-term stable power output.
- The equipment meets the national CCC standard, fully complies with CE, FCC, and RoHS safety regulations, and is safe and reliable to use.
Simple operation
- Plug and play, no need to configure, simple and convenient.
- Users can easily understand the working status of the device through the power indicator (PWR) and port status indicator (Link/Act).
Product Specification
Model | TD-S1005G | TD-S1008G |
---|
port characteristics
Fixed Port| 5 10/100/1000Base-T RJ45 ports (Data)| 8 10/100/1000Base-T RJ45
ports (Data)
Network port characteristics| 10/100/1000Base-T automatic detection, full/half
duplex MDI/MDI-X adaptive
Twisted pair transmission| 10BASE-T:Cat3,4,5 UTP(≤100 meter)
100BASE-TX:Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter)
Chip parameters
Network protocol| IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-
TX;
IEEE802.3ab 1000Base-T;
IEEE802.3x
forwarding mode| Store-and-forward (full wire speed)
Backplane
Bandwidth
| 10Gbps (non-blocking)| 16Gbps (non-blocking)
Packet forwarding
rate@64byte
| ****
7.44Mpps
| ****
11.9Mpps
MAC address| 2K
table
packet forwarding cache
| 2M
---|---
jumbo frame| 9.2Kbyte
LED indicator| Power indicator: PWR (green); Data indicator: Link/Act (green)
power characteristics
Total power/input voltage| 5W (DC 5V)
power consumption| Standby power consumption: <1W; full
load power consumption: <3W
| Standby power consumption: <1W; full
load power consumption: <4W
Power supply| External power adapter, AC: 100~240V 50-60Hz 0.36A
Physical Specifications
Working temperature/hum idity| 0~+55°C; 5%~90% RH non-condensing
storage temperature/hum idity| -40~+75°C; 5%~95% RH non-condensing
Appearance size (LWH)| 934825mm| ****
1404825mm
Net weight/Gross weight| <0.2kg / <0.4kg| <0.3kg / <0.5kg
installation method| desktop, wall-mounted
Product Certification
Lightning Protection/Prote ction Level| Port lightning protection: 4KV 8/20us;
Protection class: IP30
Certification| 3C;
CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS;
Model | Device information | Standard Power supply |
---|---|---|
TD-S1005G | Unmanaged 5 10/100/1000M RJ45 ports, Ethernet security | |
switch, external power supply. | **** |
5V/1A
TD-S1008G| 8 unmanaged 10/100/1000M RJ45 ports, Ethernet security switch, external power supply.
Contact
- HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
- Phone: +86 0760 – 23689666
- E-mail: sales@trudian.com
- If the problem is not solved properly,please send the mail to: support@trudian.com
- www.trudian.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>