Elektronik 151702 LED magnifying lamp table clamp 6W 6500 K User Manual

Elektronik 151702 LED magnifying lamp table clamp 6W 6500 K

Technische  / Specifications /

Lamp
Connections| DC socket (2.1 x 5.5 mm)
Input| 20 V           , 0.3 A
Dimensions| Lamp: 560 x 125 x 28 mm
Mounting clamp: 115 x 74 x 72 mm
Table stand: 154 x 145 x 30 mm| –
Weight| Lamp: 354 g Mounting clamp: 91 g
Desk stand: 784 g| –
Magnifying lens| Ø 100 mm
Magnification| 3 dpt (1.75x)
LEDs| 30 SMD LEDs
On-mode power (Pon)| 6 W
Useful luminous flux (Φuse) in a wide cone (120°)| 480 lm
Luminous color| cool white
Color temperature| 6500 K
Color rendering index| 80 Ra
Beam angle| 113°
Energy efficiency class| F
L70 B50 lifetime| 25000 h
Switching cycles| 12500 x
Protection level / Protection class| IP20 / III

Power supply
Connectors| Euro plug (Type C, CEE 7/16), DC plug 5.5 x 2.1 mm
Input| 220-240 V            , 50/60 Hz, 0.3 A max.
Output| 20 V           , 0.3 A, 6 W
No-load power (Pno)| 0.16 W
Efficiency (at full-load)| 80 %
tc / ta| 75 °C / 40 °C
Polarity| positive
Protection class| II
Cable length| 1.5 m
Dimensions| 60 x 47 x 35 mm
Weight| 60 g

Symbols used

For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Direct current| IEC 60417- 5031|
Polarity of d.c. power connector| IEC 60417- 5926|
Class II equipment| IEC 60417- 5172|
Class III equipment| IEC 60417- 5180|
Not dimmable| IEC 60968|
Safety isolating transformer, short-circuit proof| IEC 60417 – 5947|
Independent lighting auxiliary| IEC 60417 – 5138|

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.
  The user manual must be available for uncertainties and passing the product.

• Keep this user manual.

• Do not open the housing.

• Do not modify product and accessories.

• Use product, product parts and accessories only in perfect condition.

•  Do not repair defective products yourself, but contact the dealer or the manufacturer.

• NEVER leave the product unattended while in operation.

Not recommended for children and people with physical and/or mentally limited capabilities.

• Secure packaging, small parts and insulation against accidental use.

Please always observe the accident prevention regulations for electrical systems and equipment set forth by the Health and Safety Executive. Trained personnel must always supervise the handling of products and accessories in schools, training facilities and workshops for hobbies and self-help.

Risk of crushing

• Do not put your fingers or limbs in the clamping device.

Blinding

• Never look directly into the light source.

• Never look at bright sources of light, such as LED lamps or lasers, through the lens. The eyes can be damaged!

• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.

• Only use in dry ambience.

• Install the system and devices attached to it in a way that persons cannot be injured, or objects not be damaged for example by dropping or stumbling.

• Only use the table stand on a stable, non-slip and horizontal surface.

• Only secure the clamp to stable tabletops with a thickness of 10–60 mm.

• Use only the supplied power supply.

• Keep enough space around the product to ensure good ventilation and mobility.
  Voltage-free only with pulled plug.

• In case of emergency, after use and during a thunderstorm, pull the mains plug out of the socket directly at the plug housing.

• Switch the light off after doing any work on the product and unplug the power cord.

Fire hazard
Intense sunlight is concentrated by the lens and can magnify it to the point that it creates a fire hazard.

• Always keep the lens out of direct sunlight when it is not in use.
• Do not attach any objects to the product.
• Do not install the product near flammable liquids or gases! There is a risk of fire and explosion.

Cutting hazard
Broken glass is extremely sharp.

• Exercise caution when removing the lens.
• Dispose broken glass with suitable protective measures.

Description and function

Product

The product is an energy-efficient and versatile LED magnifying lamp with replaceable glass lens, flexible gooseneck, table stand and/or mounting clamp.

• 100 mm magnifier diameter and 30 SMD LEDs provide perfect illumination
•  glass lens with 3 dioptres and 1.75x magnification

Scope of delivery

• 60359: LED magnifying lamp, power supply, table stand, mounting clamp, User Manual
• 60365: LED magnifying lamp, power supply, mounting clamp, User Manual

Operating Elements

See Fig. 1.

1.  ON/OFF switch
2. Fixing ring
3.  Magnifying lens
4. Gooseneck
5. Power supply and DC connection
6. Locking device
7. Table stand (60359 only)
8. Mounting clamp

Intended use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property. IP20: This product is protected against medium sized foreign objects, but not against water ingress.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of product, power supply and peripherals. These must be identical.
3. Check underlays and panels for stability.

Assembly and disassembly

CAUTION! Risk of injury due to unsuitable environmental conditions

• Do not mount the product in places with direct sunlight or strong light. This will cause eye fatigue.
  NOTICE! Risk of breakage

• Assemble and disassemble the product carefully.

Table stand (60359)

1. Insert the locking device (6) into the table stand (7).
   See Fig. 2
   

2. Turn the table stand (7) until it locks into place.

3. When dismantling, make sure that the two raised marks are on top of each other.
   Otherwise there is a risk that the lock will break off.

Mounting clamp (60359, 60365)

1.  Insert the locking device (6) into the mounting clamp (8).
   See Fig. 3
   

2. Turn the mounting clamp (8) until it clicks into place.

3.  When dismantling, make sure that the two raised marks are on top of each other.
   Otherwise there is a risk that the lock will break off.

Connection

Risk of injury from tripping and falling

• Lay cables in a safe manner.
  1. Connect the power supply unit to an easily accessible socket.
  2. Connect the DC connector (5) to the magnifying lamp.

 Operation

1. Before each use, check that the lamp is securely in place.
2. Hold the table stand or the fastening clamp securely with one hand and align the lamp with the other hand.
3.  Switch the lamp on or off using the ON/OFF switch (1).

Replacing the illuminants

The lamps are permanently installed and cannot be replaced.

 Removing and replacing the magnifying lens

1. The magnifying lens is replaceable and can be removed if broken or for transport.
   Adjust the lamp horizontally.

2. Turn the fixing ring (2) counterclockwise with both hands to loosen the lens.
   See Fig. 4
   

3. Remove the old magnifying lens (3).

4. Insert a new magnifying lens (3).

5. Turn the fixing ring (2) clockwise with both hands to fix the lens.

Maintenance, Care, Storage and Transportation

The product is maintenance-free.
NOTICE! Material damage

• Switch the product off and unplug it from the mains before each cleaning.
• Only use a dry and soft cloth for cleaning.
• Be careful when cleaning to avoid scratches.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport. When using the fixing clamp, pressure marks may remain visible when the product is may remain visible when the product is disassembled.

Disposal instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>