Trudian TD-IS3208GF Non-POE Switch User Guide

June 12, 2024
Trudian

Trudian TD-IS3208GF Non-POE Switch

Trudian-.TD-IS3208GF-Non-POE-Switch-product

Product Information

  • Model: TD-IS3208GF
  • Version: 1.0

Product Specification

  • 10-port full Gigabit industrial Ethernet switch
  • Port Characteristics:
    • 4 downlink 10/100/1000Base-T RJ45 network ports
    • 2 uplink 1000M SFP optical port slots
    • 8 downlink 10/100/1000Base-T RJ45 network ports

Network Port Characteristics

  • Twisted pair transmission
  • 1-4/1-8 ports: 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive
  • 10BASE-T Cat3,4,5 UTP (100 meter)
  • 100BASE-TX Cat5 or later UTP (100 meter)
  • 1000BASE-T Cat5e or later UTP (100 meter)

Optical Port Characteristics

  • Gigabit SFP optical fiber interface (default not equipped with optical modules)
  • Optical modules need to be purchased separately (optional order mode/multimode, single fiber/dual fiber optical modules, LC/SC)
  • Fiber optic cable

Product Usage Instructions

To use the TD-IS3208GF Gigabit industrial Ethernet switch, follow these instructions:

  1. Ensure that the input voltage is within the range of DC12-57V.
  2. Connect the downlink devices to the 10/100/1000Base-T RJ45 network ports (port numbers 1-4 and 1-8).
  3. If using optical connections, purchase and install the appropriate optical modules separately (optional order mode/multimode, single fiber/dual fiber optical modules, LC/SC).
  4. If using optical connections, connect the uplink devices to the 1000M SFP optical port slots.
  5. Make sure the twisted pair transmission is properly connected according to the supported category of UTP cables (10BASE-T Cat3,4,5 UTP for 10Mbps, 100BASE-TX Cat5 or later UTP for 100Mbps, and 1000BASE-T Cat5e or later UTP for 1000Mbps).
  6. Ensure the power indicator (PWR) is green, indicating the switch is powered on.
  7. Verify the network indicator (Link/Act) is green, indicating network connectivity and activity.
  8. If applicable, check the optical port indicator (SFP) for green light, indicating optical port functionality.

With these steps, you can successfully use the TD-IS3208GF Gigabit industrial Ethernet switch for your networking needs.

Product Description

TD-IS3208GF series unmanaged industrial Ethernet switches have 8 Gigabit Ethernet ports + 2 Gigabit uplink SFP optical port slots, and all ports support wire-speed forwarding. TD-IS3208GF completely complies with industrial product design and materials. The shell is made of aluminum alloy to enhance heat dissipation performance. It supports 6KV electrostatic surge protection, protection level reaches IP40, supports dual DC redundant power supply, low power consumption fanless heat dissipation technology, MTBF average trouble- free working time can reach 35 years, and super long 5-year warranty. It is suitable for industrial scenarios such as intelligent transportation, rail transit, electric power industry, mining, petroleum, shipping, metallurgy, pipe gallery and green energy construction to establish a cost-effective, stable and reliable communication network. Non-network management model, plug and play, no need to configure, easy to use;

Product Features

  1. Dual optical port uplink port, long-distance transmission, adaptable to various ring network/chain network cascading and expansion, making networking easier;
  2. Industrial-grade high-bandwidth switching chip, high backplane, large cache, reducing network congestion;
  3. Support IEEE802.3X full-duplex intelligent flow control, large stream high-definition transmission without lag;
  4. Support MAC address automatic learning and updating, support port automatic flip (Auto MDI/MDI-X) function;
  5. The service port supports 6KV anti-surge (lightning protection) protection, power short-circuit and overload protection, making it safer and more secure to use;
  6. Aluminum alloy profile metal shell, strong heat dissipation, shielding interference, strong, rust-proof and more durable;
  7. Dual DC redundant power supply interface, DC12-57V wide voltage input, meeting the wide voltage requirements of industrial environments;
  8. DIN35 guide rail installation, IP40 protection level, wide temperature design from -40°C to +75°C, more stable and reliable application in harsh environments;
  9. Low power consumption, fanless and silent design, plug and play, no configuration required, easy to use.

Product Specification

Model TD-IS3204GF TD-IS3208GF

Port characteristics
fixed port|

downlink port

| 4 10/100/1000Base-T RJ45 network ports| 8 10/100/1000Base-T RJ45 network ports
uplink port| 2 1000M SFP optical port slots
Network port characteristics| 1-4/1-8 ports 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive
Twisted pair transmission| 10BASE-T:Cat3,4,5  UTP(≤100 meter)

100BASE-TX:Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter)

Optical port characteristics| Gigabit SFP optical fiber interface, the default is not equipped with optical modules, which need to be purchased separately, (optional order

mode/multimode, single fiber/dual fiber optical modules, LC/SC)

fiber optic cable| Multi-mode :850nm 0~550M        , 50μm/125μm&62.5μm/125μm Singlemode :1310nm 0~40KM  ,      1550nm 0~120KM 。9.5μm/
Chip parameters
Network management type| unmanagement

Network protocol

| IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX;

IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;

IEEE802.3x Flow Control;

forwarding mode| Store-and-forward (full wire speed)
Backplane Bandwidth| 12Gbps (non-blocking)| 20Gbps (non-blocking)
Packet forwarding rate@64byte|

8.928Mpps

|

14.88Mpps

MAC address table| 2K| 8K
packet forwarding| 2Mbits
cache|
---|---
jumbo frame| 9.2Kbytes
indicator light| Power indicator: PWR (green); Network indicator: Link/Act (green); Optical port
indicator: SFP (green).
MTBF| 500,000 hours
Power Characteristics
Input voltage| DC12-57V
Power consumption| Standby power consumption: <5W;

full load power consumption: <8W

| Standby power consumption: <8W; full

load power consumption: <10W

Supporting power supply| The power supply is not provided by default and needs to be purchased separately. It is recommended to purchase DC24V/1A
Physical Specifications
Working temperature/humidity| -40~+75°C; 5%~90% RH non-condensing
storage temperature/humidity| -40~+85°C; 5%~95% RH non-condensing
Appearance size

(LWH)

| 1359535mm| 15012548mm
Net weight/Gross

weight

| <0.5kg / <0.8kg| <1.0kg / <1.3kg
installation method| Desktop, DIN-rail installation
Product Certification
Lightning Protection/Protection Level| Port lightning protection: 6KV 8/20us; protection level: IP40
Applicable industry standard| IEC61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-3 (RS): 10V/m (80~1000MHz)

IEC61000-4-4 (EFT): power line: ±4kV; data line: ±2kV

IEC61000-4-5 (Surge): power line: CM±4kV/DM±2kV; data line: ±4kV IEC61000-4-6 (radio frequency conduction): 10V (150kHz~80MHz)

IEC61000-4-8 (power frequency magnetic field): 100A/m continuous; 1000A/m, 1s to 3s

IEC61000-4-9 (pulse magnetic field): 1000A/m IEC61000-4-10 (damped oscillation): 30A/m 1MHz IEC61000-4-12/18 (oscillating wave): CM 2.5kV, DM 1kV

IEC61000-4-16 (common mode conduction): 30V continuous; 300V, 1s FCC Part 15/CISPR22 (EN55022): Class A

IEC61000-6-2 (general industry standard)

mechanical properties| IEC60068-2-6 (anti-vibration)

IEC60068-2-27 (shock resistance) IEC60068-2-32 (free fall)

Certification| CE,FCC, RoHS,CCC

Contact

  • HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code:528451
  • Phone: +86 0760 – 23689666
  • E-mail: sales@trudian.com
  • If the problem is not solved properly,please send the mail to: support@trudian.com
  • www.trudian.com/en/

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals