LINDY HDMI 8K60 Repeater User Manual
- July 10, 2024
- LINDY
Table of Contents
LINDY HDMI 8K60 Repeater
Product Information
Spec+ifications
- Product: HDMI 8K60 Repeater
- Model No.: 38391
- Website: lindy.com
- HDMI® 2.1
- HDCP 2.3
- Maximum bandwidth: 48Gbps
- Maximum resolution: 7680×4320@60Hz 4:4:4 8bit with Dynamic HDR
- Support pass-through compressed and uncompressed audio such as LPCM7.1, DTS, Dolby TrueHD
Maximum distance:
- 8K60Hz 4:4:4 8bit – 5m In / 5m Out, Total: 10m (32.81ft)
- 4K60Hz 4:4:4 8bit – 8m In / 5m Out, Total: 13m (42.65ft)
- Maximum power consumption: 1W
- Operating temperature: 0°C – 70°C (32°F – 158°F)
- Storage temperature: -10°C – 80°C (14°F – 176°F)
- Humidity : 10-85% RH (non-condensing)
- Housing material : Metal
Product Usage Instructions
Introduction
Thank you for purchasing the HDMI® 8K60 Repeater. This product has been
designed to provide trouble-free, reliable operation. It benefits from both a
LINDY 2-year warranty and free lifetime technical support. To ensure correct
use, please read this manual carefully and retain it for future reference. The
Lindy HDMI® 8K60 Repeater is an ideal solution for extending high-quality
HDMI® signals up to distances of 13m. This active repeater allows the
connection of two, long-length HDMI® cables while amplifying the source signal
to ensure maximum reliability without degradation.
Package Contents
The package includes the HDMI 8K60 Repeater.
- HDMI® 8K60 Repeater
- USB Type C to A cable, 1m (3.28ft)
- Lindy Manual
Features
The HDMI 8K60 Repeater supports up to 8K resolution.
- Extends HDMI® Signals up to a maximum of 13m using high quality HDMI® cables
- Supports resolutions up to 7680×4320@60Hz 4:4:4
- Supports HDMI® 2.1 features including dynamic HDR, DSC, HFR, VRR, ALLM
- Self-powered active repeater with 5V Type C power port for additional power
Installation
- Ensure all connections between the source, repeater, and display are secure.
- If there is no display on the screen, follow these steps:
- Disconnect all connections.
- Connect a USB Type C cable to the repeater.
- Connect a 5V USB charger to the repeater.
For installation, please follow the steps below.
- Connect an HDMI® cable from a source device to the “Input” port on the repeater.
- Connect an HDMI® cable from the “Output” port on the repeater to an HDMI® display.
- Power on the source and display device, the installation is now complete.
Troubleshooting
If there is no display on the screen, ensure all connections are secure and
follow the steps mentioned in the installation section.
If there is no display on the screen, please check the following:
- Ensure all connections between the source, repeater and display are secure. If so, disconnect then re-connect each connection.
- Ensure high quality HDMI® Ultra High Speed cables are used to reach up to 8K resolutions.
- Some HDMI® source devices may not provide enough power for the repeater, in these cases, connect a USB Type C cable to the repeater and a 5V USB charger.
The terms HDMI®, HDMI® High-Definition Multimedia Interface, HDMI® trade dress and the HDMI® Logos are trademarks or registered trademarks of HDMI® Licensing Administrator, Inc.
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk ,
T: +44 (0)1642 754000
- Tested to comply with: No. 38391
- FCC standards: 1st Edition, June 2024
- For home and office use: lindy.com
FAQ
Q: What should I do if there is no display on the screen?
A: Ensure all connections between the source, repeater, and display are
secure. If there is still no display, follow the troubleshooting steps
provided in the user manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>