DL300 Electric Motorized Video Dolly

Instruction Manual

If you have any questions about product, we glad to help you.

US +1 732-623-9777
UK +44 (0) 3330113494

vip@neewer.com 
www.neewer.com

UK REP
Lingfeng Electronic (UK) Ltd International
House, 10 Churchill Way, Cardiff, CF10 2HE, United Kingdom

EC REP
NW Formations GmbH(for authorities only)
Hoferstrasse 9B, 71636 Ludwigsburg, Germany

Shenzhen Neewer Technology Co.,Ltd. Room 1903, Block A, Lu Shan Building No. 3023
Chunfeng Rd Luo Hu District, Shenzhen
Guangdong 518001, China

Product Overview

1. Motorized wheel
2. 1/4″ -20 screw (39
3. Display: Shows the current speed setting.
4. 5mm shutter jack: Take photos using a shutter cable.
5. Type C Port: Function 1: To charge with a 5V 2A power adapter, Function 2: To upgrade firmware using a cable.
6. Speed button: 1-5 speeds. Press once to speed up; push twice to reduce speed.
   Running time per meter (1 to 5 speeds):1st speed| 2nd speed| 3rd speed| 4th speed| 5th speed
   ---|---|---|---|---
   ≈105s| ≈85s| ≈65s| ≈45s| ≈25s
7. Left Directional Key: Press to start and move to the left.
8. Indicator light
   Indicator light description:

Power indicator

Status| Power| Status| Power
4 lights on| Fully charged| 1 lights on| 25%
3 lights on| 75%| 4 flashing lights| About to shut down
2 lights on| 50%| Pulsing lights| Charging

*The dolly can be charged if turned on or off, but it cannot be used while charging is in progress.

Bluetooth connection status

Bluetooth not connected| Light flashes slowly (1 second flash intervals)
Successful Bluetooth connection| Light remains lit

*During time lapse shooting, the fourth light will turn on when the shutter is on, and go out when the shutter is off.

9. Right Button: push to start and move to right.
10. ON/OFF button press and hold for 3 seconds to switch off. short press to switch on or pause.

Operating Instructions

1. Angel Adjustment Adjustment range: 45°-120°

2. Sleep Mode
   After turning on, the motor will enter sleep mode if there is no operation within 10 minutes. Re-activate by pressing any button. It will automatically turn off if there is no operation in 20 minutes.

3. APP Control
   This product can be operated using the function buttons or through the APP, but not by both at the same time.

4. Scan the following QR codes to download “NEEWER “app and sign in.▲ For Android users, please enable the location permissions in your phone settings.

5. Scan the QR code below for instructions on how to use the APP control.

Note: When the app is used, the buttons will remain inactive and can be used after restarting the device.

Caution

1. Please use a power adapter with USB DC 5V/2A output for charging.
2. Do not expose the product to direct sunlight.
3. Keep the product away from fire.
4. Complete disassembly is not permitted and will invalidate any warranty claim.

Specifications

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>