Bellevue MVLWS58039ORB Ethyl 9 Tall Outdoor Wall Sconce Installation Guide
- June 20, 2024
- BELLEVUE
Table of Contents
MVLWS58039ORB Ethyl 9 Tall Outdoor Wall Sconce
Tools Required: Flathead screwdriver, Phillips screwdriver, silicon sealant,
wire strippers, electrical tape, safety glasses.
Bulb Recommended: (1) 60W Type-A medium base bulbs, Alternate (1) LED bulb.
Estimated Assembly Time: 20 – 30 minutes
Preparation:
- Identify and inspect all parts before beginning installation
- Check package contents list and diagrams below to be sure all parts are included.
- If any parts are missing or damaged, do not attempt to assemble, install or operate the fixture.
Warnings And Cautions
Turn off electrictiy at circuit breaker or main fuse box before installation.
Consult alicensed electrician if in doubt.
These instructions are provided for your safety. Itis very important you read
them completely before installing the fixture. We strongly recommend that a
licensed, ptofessional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs
are given sufficient time to cool before removal. Do not subject glass parts
to any shock while in operation or shattering may result.
Package Contents
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | ||
| (Pre-assembled to fixture body) | 1 pc | 912575KIT | |
| B | Green Ground Screw | ||
| (Pre-assembled to Crossbar) | 1 pc | ||
| C | Wire Connector | 3 pcs | |
| D | Outlet Box Screw | 2 pcs | |
| E | Fixture Body | 1 pc | N/A |
| F | Glass | ||
| (Pre-assembled to fixture body) | 1 pc | G12574SH |
NOTE: ALL
DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2”
STEP1:
a. Secure the crossbar to the outlet box (notincluded) with outlet box screws.
b. Tighten until snug.
Note: Place a cloth or towel on the