alza TPP01-Z Smart Control Panel S User Manual
- June 13, 2024
- alza
Table of Contents
alza TPP01-Z Smart Control Panel S
Product Specifications
- Product name: Smart Control Panel S
- Product model: S
- Input: Rated current
- Wireless protocol: Wi-Fi, Zigbee
- Working temperature: N/A
- Working humidity: N/A
- Product size: N/A
- Net weight: N/A
- Wireless Type: Wi-Fi, Zigbee
- Frequency: 2412-2472MHz, 2405-2480MHz
- Max. EIRP Power: 20 dBm, 10 dBm
Product Usage Instructions
Preparation before use
- This product is connected to the network via Wi-Fi, so arrange the Wi-Fi network in advance.
- Prepare tools such as a screwdriver, test pencil, and electrical tape.
- Do not operate with live electricity.
Download and Install the App Search for Smart Life App in the App Store or scan the QR code on the outer packaging/instructions. Click Register for first-time use or Login if you already have an account.
Commission Settings
- Install the device following the installation guide. Turn on the power and connect to the network per screen instructions.
- Open the Smart Life App, scan the QR code on the device to configure the network. Follow on-screen instructions post-commissioning.
FAQ
-
What should I do if my Smart Control Panel S is not connecting to the network?
If your device is not connecting to the network, please check your Wi-Fi settings and ensure that you are following the correct steps outlined in the user manual. You may also try restarting both your device and router before attempting to reconnect. -
How can I reset my Smart Control Panel S to factory settings?
To reset your device to factory settings, locate the reset button on the device (usually a small hole). Press and hold the reset button for about 10 seconds until you see the device lights flash. Release the button and wait for the device to restart. -
Can I control multiple sub-devices with the Smart Control Panel S?
Yes, the Smart Control Panel S allows you to manage multiple sub-devices within your home using interactive methods such as screens and apps. You can control various smart devices connected to the panel through the Smart Life App.
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefullybefore first use and keep this user manual for future reference. Pay
particular attention tothe safety instructions. If you have any questions or
comments about the device, please contact the customer line.
- ✉ www.alza.co.uk/kontakt
- ✆ +44 (0)203 514 4411
- Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
Product Description
This in-wall Smart Control Panel S mainly provides gateway functions, interactive functions and scene panel functions. It is installed in the cassette of the user’s home. The user can manage the sub-devices at home via interactive methods such as screens and apps.
Preparation before use
- This product is connected to the network via Wi-Fi, please arrange the Wi-Fi network in advance.
- Please prepare tools such as a screwdriver, a test pencil, a roll of electrical tape, etc…
- Do not operate with live electricity.
Download and open the app
Search for “Smart Life” App in the App Store or scan the QR code on the outer
packaging/instructions to download and install the App. For the first-time
use, please click the “Register” button to register an account; if you already
have an account, click the “Login” button.
Scan the QR code to download “Smart LiFE” App App is subjected to the actual released version
Commission settings
- Install the device according to the installation guide. Turn on the power, and wait for the device to initiate. Connect to the network according to the instructions on the screen.
- Open the Smart Life App, then scan the QR code on the device to configure the network (as shown in the figure below), and perform related operations according to the instructions on the device interface after the commission is successfully finished.
Open the App Scan the QR code to bind this device
The QR code is based on the display of actual device.
- Device/scene overview: enter the corresponding entry in the smart control panel page of the Smart Life App, tick the devices or scenes that need to be displayed on the screen.
- Voice control: enter the corresponding entrance in the smart control panel page of the Smart Life App to configure the vocal scene.
- Gateway function: enter the corresponding entrance in the smart control panel page of the Smart Life App, and add Zigbee devices.
- Setting: slide down at the top of the TPP01-Z(EU) screen to call out the setting page.
Product specifications
- Product name Smart Control Panel S
- Product model TPP01-Z(EU)
- Input 100 ~ 240 VAC, 50/60Hz
- Rated current 74mA
- Wireless protocol Wi-Fi, Zigbee
- Working temperature 0°C~40°C
- Working humidity 5%-90%RH noncondensing
- Product size 86.0 x 86.0 x 10.5mm (without base) 86.0 x 86.0 x 36.2mm (including base)
- Net weight 198g
| Wireless Type | Frequency | Max. EIRP Power |
|---|---|---|
| Wi-Fi | 2412-2472MHz | 20 dBm |
| Zigbee | 2405-2480MHz | 10 dBm |
Packing list
- Smart Control Panel S x 1
- Product manual x 1
- Installation guide x 1
- Screw x 2
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.
WEEE
This product must not be disposed of as normal household waste by the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point forthe recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines by national regulations