AGFAPHOTO PPS 100Pro Portable Power Station User Manual

AGFAPHOTO PPS 100Pro Portable Power Station

Please read this manual carefully before operating the product.
Please keep this manual with you for further reference.

Product Information

AgfaPhoto PPS 100Pro

The AgfaPhoto PPS 100Pro is a portable power station that provides power for your electronic devices. It comes with an AC power adapter and a user manual.

Product Package Contents

Product Technical Specifications

• Net weight: 1.04 kg (2.29 lbs)
• Battery: Lithium-Ion
• Battery capacity: 88.8 Wh
• Input: 1x 3.5mm DC35135
• Output: 2x USB (QC 3.0), 1x Type-C (PD 3.0), 1x 5.5mm DC5521, 1x AC
• Output voltage and current:
  • 5 V, 2.4 A (Total 4.8 A max.)
  • 5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.)
  • 5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (18 W max.)
  • 12-16.8 V, 10 A (13 A max.)
  • 230 V / 50 Hz 80 W (120 W max.)
• Certificates: CE, FCC, UN38.3
• Charging cycles: >500
• Management system: Battery management system
• Operating temperature: -10°C to 45°C
• Dimensions (W x D x H): 200 x 145 x 55 mm

Product Usage Instructions

1. Read the user manual carefully before operating the product.
2. Check that all items are included in the package.
3. Charge the AgfaPhoto PPS 100Pro before use by plugging in the AC power adapter to the input port and a power outlet. The battery indicator shows the remaining charge level.
4. Connect your electronic device to the output port with the appropriate cable. The AgfaPhoto PPS 100Pro can power devices such as LED lamps, cameras, notebooks, and mobile phones.
5. When not in use, store the AgfaPhoto PPS 100Pro in a cool and dry place. Do not expose it to direct sunlight or moisture.
6. The lithium-ion battery has a lifespan of several years. If you need to dispose of the product, follow the local regulations for battery recycling.
7. If you encounter any problems with the product, refer to the user manual for troubleshooting or contact the customer service for assistance.

SET INCLUDES

INTRODUCTION

Congratulations on purchasing the “AgfaPhoto PPS 100Pro” mobile socket. With 88.8 Wh of stored energy, you can supply electronic devices with power anytime and anywhere, be it when camping, at an outdoor photo shoot, in your motorhome, in the event of an emergency or a power failure.

Note the following points while reading through this instruction manual:

• This manual was prepared with care and to the best of our knowledge. Contact us should you have any questions relating to the product.
• This manual may not be copied or duplicated, except for personal use.

Disclaimer

• Our company cannot be held liable for damages caused by fire, earthquake, use by a third party, other accidents, intentional misconduct on the part of the customer, abuse or other abnormal conditions.
• Do not repair any damage to the AC plug or power supply on your own.
• The warranty covers all terms and conditions of the warranty. Contents that are not specified in the warranty terms and conditions are beyond our responsibility.
• Our company assumes no liability for damages caused by incorrect use or non-compliance with this instruction manual.
• This instruction manual, as well as other language versions can be downloaded as a PDF file on our website: www.portable-power-stations.com.
• Intended use: The AgfaPhoto PPS 100Pro unit is intended as a power supply for electronic devices with a maximum power consumption of 80W continuous, 120W peak. Our product is not suitable to be used with equipment that relates to one‘s own personal safety or which relies heavily on electricity, such as medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, fires or machine failures caused by using our product with the aforementioned devices.

Observe these instructions to ensure safe usage.

Explanation of symbols

This symbol together with DANGER means| Noncompliance may very likely lead to serious injury or death.
---|---
This symbol together with WARNING means| Noncompliance may lead to serious injury or death.
This symbol together with CAUTION means| Noncompliance may lead to injuries and/or property damage.
This symbol together with ATTENTION means| Noncompliance may damage the unit.

• Serious injuries include blindness, burns, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
• Injuries include burns, electric shock, etc., which do not lead to hospitalization or permanent treatment.
• Property damage: includes buildings, belongings and pets, etc.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Precautions

DANGER

• Do NOT disassemble, repair or modify the unit or the battery.
• Doing so may result in electric shock, fire, etc.
• Do NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
• Doing so may result in fire or injuries.
• Do NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
• Doing so may result in electric shock, fire, etc.
• Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
• Connecting to the mains may lead to electric shock, injuries or fire.
• Do NOT touch the unit or the plug-in points if your hands are wet.
• Doing so may result in electric shock.
• Do NOT connect any metallic objects to the AC input or output.
• Doing so may result in electric shock, fire, etc.
• Do NOT rub your eyes if fluid from inside the unit should get in your eyes.
• If this should occur, flush eyes with water and seek medical attention immediately.
• This can lead to blindness.
• Do NOT dispose the unit together with household waste.
• Follow the local law to dispose the unit.
• Do NOT use any inappropriate power cords.
• Doing so may result in electric shock, fire, etc.
• Do NOT operate the unit above the specified input voltage.
• Doing so may result in electric shock, fire, etc.
• Do NOT use the unit if it is not functioning correctly.
• Doing so may result in electric shock, fire, damage to the unit, etc.
• Do NOT move the unit if it is recharging or in use.
• Doing so may result in electric shock, damage to the unit or other injuries.

WARNING

• Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
• Failure to do so may result in a short circuit, smoke or fire if metal dust or small metallic parts come in contact with the connections.
• Check the unit prior to every use. Do not use the unit if it is damaged, broken.
• If you notice that the unit has any damage or cracks, is broken, or has other abnormalities, do NOT continue to use the unit and contact your dealer or our customer service center.
• Do not use the unit if the power cord is damaged or broken.
• Keep the unit away from children. Do NOT let children use the power supply unit.
• Doing so may result in an accident or injuries. This unit must not be used by children. The unit and its connection cables must be kept out of reach of children. Children must not play with the unit.
• This unit may only be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are monitored or have been instructed in how to safely use the unit and understand the resulting risks.
• Keep this product away from pets.
• Do NOT use or store the unit in an area or environment with high temperature.
• Doing so may cause the unit to deform or overheat.
• Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
• Contact with the fluid may result in injuries.
• In a storm, unplug the power cord from the socket.
• A storm may result in an overcurrent coming from the socket, resulting in overheating, fire or other accidents.
• Do NOT charge the unit via power supply systems that operate outside of 100-240V.
• That may otherwise result in overheating, fire, etc.
• Do NOT place the unit on its side or upside down while in use or storage.
• Doing so may result in leakage or cause the unit to overheat leading to other accidents.

CAUTION

• If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer service center.
• The unit complies with all legal requirements for transport of dangerous goods.
• The capacity of the lithium battery pack in the unit exceeds 80 Wh.
• Based on international standards: If this unit is to be sent by airplane, it must be transported in accordance with IATA standard packaging. IATA instructions and labelling requirements and the relevant declarations must be completed.
• Make sure that the unit is properly secured when transporting it in a motor vehicle.
• Failure to do so may result in damage to the unit, electric shock, overheating, fire and other accidents.
• Only charge and use the unit within an ambient temperature of -10 to 40 °C (14 – 104 °F).
• Operating the unit above or below this temperature range may result in overheating or reduced performance.
• Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
• To prevent accidents, please contact the dealer or our customer service center to have the unit checked and repaired.
• Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
• Make sure that the device you are connecting is switched off before you connect it.
• A device starting up suddenly may lead to accidents or injuries.
• If the protective function is activated and the output of the device is switched off, disconnect the electric devices from the power output. Switch the unit off in case of non-use/storage in order to prevent electric shock and the battery from discharging unnecessarily, etc.

TRANSPORTATION

1. Carry the unit with both hands.
   • ATTENTION: Keep the unit away from other objects when moving.
   • Take extra care to ensure that the unit is never allowed to fall to the ground.
2. Placing the unit on a stable surface.
   • ATTENTION: Place the unit on a stable surface.
   • By doing so, it is easier to read the indicators.
3. Transporting the device.
   • DANGER: The unit should not be subjected to any impact or vibrations.
   • Otherwise there is a risk of fire.
   • Keep the unit‘s original packaging and use it when you need to transport the unit.

GET TO KNOW YOUR Agfa Photo PPS 100Pro

Button and connector explanations

• A. AC Output On/Off Button
• B. AC Indicator
• C. Battery-Indicator
• D. Power On/Off Button
• E. LED Lightpanel On/Off Button
• F. Cooling vents
• G. Input: 1x 3.5mm DC35135 Input 15~24 V, 1.2 A max.
• H. Output #1: 2x USB 5 V, 2.4 A (Total 4.8 A max.)
• I. Output #2: 2x USB 5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.) | Qualcomm QuickCharge™ 3.0
• J. Output #3: 1x Type-C 5 V, 3 A / 9 V, 2 A / 12 V, 1,5 A | PD 3.0 (18 W max.)
• K. Output #4: 1x 5.5mm DC5521 12-16.8 V, 10 A (13 A max.)
• L. Output #5: 1x AC 230 V / 50 Hz 80 W (120 W max.)
• M. Ultrabright LED Lightpanel

CHARGING

Before use or storage, plug your AgfaPhoto PPS 100Pro into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel as soon as possible.

ATTENTION

• Only charge the unit when the ambient temperature is between -10 and +40 °C (14 – 104 °F).

WHAT IT CAN POWER

• LED Light (5W) ~17 hrs
• Cellphone (5.5Wh) ~16 recharges
• Camera batteries (7.5 Wh) ~12 recharges
• 12“ Notebook (85 Wh) ~1 recharge

and many more

BATTERY INDICATOR

• The battery indicator shows the total charge remaining in your AgfaPhoto PPS 100Pro.

NOTE

• Charging time may vary depending on the ambient temperature involving the solar charger.
• End the charging process by switching off the unit and pulling the plug out of the socket.

CHARGING VIA MAINS POWER SUPPLY

Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit. You will know the unit is charging when the blue LED battery indicators are blinking. The unit is fully charged when all battery indicators stop blinking and remain solid. After the unit is fully charged, please remove the AC wall charger in time.

CHARGING VIA SOLAR PANEL

1. Place your solar panel where it will get as much direct sunlight as possible.
2. Plug the output of the solar panel into the input of the unit to start charging.
   • You will know the unit is charging when the blue LED battery indicator lights up and flashes.
   • The unit is fully charged when all battery indicators stop flashing and remain solid.

TECHNICAL SPECIFICATIONS

General information

Net. Weight| 1.04 kg (2.29 lbs)
Working temperatures| -10°C – +40°C (14°F – 104°F)
Dimensions (LxWxH)| 165 x 80 x 117 mm (6.49 x 3.14 x 4.60 inch)
Certificates| CE, FCC, UN38.3

Battery

Cell type| Lithium-Ion
output | Capacity| 80W continuous, 120W peak | 88.8 Wh
Lifecycles| >500

Management system

| overcharge Protection, over-discharge Protection, overCurrent Protection, overPower Protection, Short-Circuit Protection

Ports

Input | 1x 3.5mm DC35135| 15~24 V, 1.2 A max.
output | 2x USB| 5 V, 2.4 A (Total 4.8 A max.)
output | 2x USB (QC 3.0)| 5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.)
output | 1x Type-C (PD 3.0)| 5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (18 W max.)
output | 1x 5.5mm DC5521| 12-16.8 V, 10 A (13 A max.)
output | 1x AC| 230 V / 50 Hz 80 W (120 W max.)

USING THE Agfa Photo PPS 100Pro

How to provide power for AC appliances with AgfaPhoto PPS 100Pro?

• Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the power button and the unit will start providing power to your appliances.

WARNING

• AC outlets, AC voltage and frequencies are different in different countries.
• Please carefully check whether the product specifications are consistent with the appliance specifications before use.

Limited Appliance Wattage <80W

• Lamps, Electric Fans, TVs, etc. AC will shutdown when it’s short circuited or power overloaded.
• Remove the device and the unit will recover from short-circuit or overpower protection in a few seconds. Repress the AC output button to switch on AC output again.

How to provide power for Type-C or USB devices with AgfaPhoto PPS 100Pro?

• Connect the cable of your device to the Type-C or one of the 4 USB port of the AgfaPhoto PPS 100Pro. You can even use different ports simultaneously.

NOTE

• Some smart devices, such as bluetooth headphones and LED lights require a very small input current to charge, which could be less than 150mA. AgfaPhoto PPS 100Pro can charge this kind of smart devices without turning on the AC outlet. Press the power button for 3-5 seconds and the USB output ports and the battery indicators will turn on and start charging your USB devices. After your devices are fully charged, please switch off the AgfaPhoto PPS 100Pro.
• This product supports Qualcomm QuickCharge™ 3.0 output.
• It supports 5V-12V / 2A max output for smart devices which also support Qualcomm QuickCharge™ 3.0.
• The actual output voltage and current depends on the actual smart devices. It can be obtained by consulting the smart device manufacturer.

How to provide power for DC 12V appliances (such as head lamp, fans) with AgfaPhoto PPS 100Pro?

• Plug your appliances to the DC output port and press power switch button to gain power.

NOTE

• Please make sure whether your DC 12V appliance supports charging with 5.5mm DC header interface (the diameter of the DC Port of the product is 5.5 mm).
• Otherwise it is unable to connect with the DC output, but you can buy the corresponding adapter and connect your appliance with it.

WARNING

• The DC output voltage range is between 12V~16.8V, maximum output current is 10.8A.
• DC output voltage drops or increase while battery capacity drops or increase due to chemical characteristics of the battery. If your appliance is not built-in input voltage stabilizing function, it may shutdown when input voltage is too low or too high.
• If your 12V devices can not work due to input voltage is too high, please read the device manual or consult the device manufacturer to get the input voltage range of your device.

Best-use

• When recharging devices with AgfaPhoto PPS 100Pro, you should take note of the battery indicator.
• If you plug in devices that have a high power requirement, the charge level of AgfaPhoto PPS 100Pro can drop quickly and you will not be able to extract the entire 88.8Wh of energy.
• On the other hand, if you’re charging devices that draw power more slowly (tablet or smartphone), you will be able to extract close to the full 88.8Wh from AgfaPhoto PPS 100Pro. If yor’re experiencing shorter times, you can check the device’s power requirement.
• When the AC port is not in use, turn it off to save power.

Appropriate temperature usage

• Charge protection: AgfaPhoto PPS 100Pro can charge your device when the ambient temperature is between -10 – 40°C. Outside this temperature range, the system automatically stops charging but will restart once the temperature is back inside the acceptable range.
• Discharge protection: AgfaPhoto PPS 100Pro can power your devices when the ambient temperature is between -10 – 40 °C. Outside this temperature range the system automatically stops charging your device but will restart once the temperature is back inside the acceptable range.

ATTENTION: Make sure that the electronic device you are powering works properly prior to use. The max. power consumption for electronic devices is 80W continuous and 120W peak. Due to the different types of electric devices, it is possible that they may not operate even if their power consumption is less than 80W.

TROUBLESHOOTING

If your devices are not recharging as they should using AgfaPhoto PPS 100Pro follow these steps:

1. Ensure the device has been switched on and the battery indicator is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your AgfaPhoto PPS 100Pro.
3. Verify your device is suitable for use with the AgfaPhoto PPS 100Pro.
   • All AgfaPhoto PPS 100Pro output ports have their own max. power. Check the AgfaPhoto PPS 100Pro’s technical specifications to ensure your device is compatible.
   • Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in use. In these cases, power down your device and recharge it.

What should I do if the unit gets wet?

Immediately turn off the unit and wait until you are certain that it is completely dry before turning it back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What type of battery is in my AgfaPhoto PPS 100Pro?
   • AgfaPhoto PPS 100Pro contains a 88.8Wh lithium-ion battery pack. Lithium-ion batteries are much smaller and lighter than normal lead-acid batteries and also can be cycled many more times.
2. How do I know if my AgfaPhoto PPS 100Pro is charged?
   • To check the charge level of your AgfaPhoto PPS 100Pro, refer to the battery indicator. The number of bars you see indicates the remaining power. AgfaPhoto PPS 100Pro can be used until it is empty but we recommend recharging when the level is at one bar.
3. Can I charge the AgfaPhoto PPS 100Pro while supplying power at the same time?
   • Yes. All outputs support simultaneous charging and discharging. Please note, however, that this only makes sense with a remaining battery capacity of more than 10%. Please also be aware, that if the battery voltage is less than 13V, the inverter will shut down due to battery cell protection.
4. Can I take my AgfaPhoto PPS 100Pro on a plane?
   • Yes, it is possible to carry the AgfaPhoto PPS 100Pro in your hand luggage. But please always check the individual restrictions of your airline and your country. However, keeping the AgfaPhoto PPS 100Pro in the checked baggage is not permitted for safety reasons as it contains lithium-ion batteries.

ATTENTION

• The unit provides Modified Sine Wave output, and can be compatible to AC electric appliances that work with sinusoidal waveform (power <80W).
• However, anything that uses an AC motor isn‘t going to work to full capacity on a modified sine wave, such as an electrical fan. It will even make the electric appliance arouse some noise.
• Appliances like refrigerators, microwaves, and compressors that use AC motors and some delicate medical equipment should use a product with a pure sine wave inverter.
• This product is only used for emergency, it cannot replace the normal alternating current, for longterm use, please adapts the power station specification required by electrical appliances.
• AgfaPhoto PPS 100Pro is not suitable for use with a device with an electric motor.

STORAGE AND DOWNTIME MAINTENANCE

Charging to maximum capacity

Fully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once every three months and store the power supply unit only in a dry and dust-free environment which is out of reach of children. Suitable storage temperature: -10 to 40°C (14 – 104 °F). Keep out of direct sunlight. Make sure that the unit rests on a stable surface.

System shutdown

• If the system shuts down automatically because of lower battery capacity, please recharge it.

Cleaning

• Wipe away any dirt using a damp cloth.

ATTENTION

• Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents.
• Do not use.

Failure

• Failure to maintain your AgfaPhoto PPS 100Pro by following these steps can result in battery damage which will void the product warranty.

SERVICE LIFE OF LITHIUM ION BATTERIES

Charge, supply current between -10 and 40°C (14 – 104 °F). Store between -10 and 45°C (14 – 113 °F)

• Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.

Do not connect a continuous load of more than 80 W

• The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.

Do not continue to charge the battery after it has charged completely

• Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the charging process has been concluded. Otherwise, the service life of the lithium battery may be reduced.

Switch off the unit if it is not being used

• Unnecessary power consumption also reduces the running time of the lithium battery.

Fully charge the battery prior to placing it in storage

• Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit at least once a year.
• After prolonged storage, it may be necessary to charge and discharge the battery several times in order to reach full capacity.

DISPOSAL AND RECYCLING

Lithium-ion battery

• As soon as the end of the battery‘s service life is reached, the entire lithium-ion battery can be recycled. Do not open or disassemble the unit.

Electric device

Old electric devices may not be disposed of together with normal household waste. According to the directive 2012/19/EU, the device must be disposed of in a controlled manner at the end of its service life. The recyclable materials contained in the unit shall be sent to recycling to reduce the burden on the environment.

This unit contains lithium ion batteries. These are hazardous materials and are subject to specific transport and handling regulations. Lithium-ion batteries may ignite or explode if handled incorrectly. For the safe disposal of the unit, contact a collection point or your local municipality for more information and indicate that the unit contains lithium batteries.

Package

• The product package consists of recyclable materials.
• Dispose of these in an environmentally friendly manner and sort the materials in the provided collection systems.

REPAIR TERMS AND CONDITIONS

1. In the case of device failure which can be attributed to poor workmanship, please take the original sales receipt with the purchase date (invoice, etc.) to the retail store. In case of normal use, the power supply unit will be repaired or replaced free of charge within the two year warranty period. In addition to that, the customer must bear any shipping charges that may occur.
2. Note that we do not assume any liability for consequential damages (foreseeable damages, psychological damages, etc.).

CUSTOMER SERVICE

Contact distributor for technical support /customer service

Europe [GBT GmbH]

An Gut Nazareth 18A 52353 Düren Germany| Telephone: +49 (0) 2421 / 20 85 60| ****

E-Mail:info@gbt-international.com

AgfaPhoto is used under license of Agfa-Gevaert NV & Co.KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co.KG nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer.

Suitable for consumer imaging products.
Produced for and distributed by
GBT GmbH

An Gut Nazareth 18 A
D-52353 Düren
Made in P.R.C.

Contact

• AgfaPhoto Holding GmbH: www.agfaphoto.com
• GBT GmbH:  www.gbt-international.com

Product colors may slightly vary from shown.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Quick Charge is a trademark of Qualcomm Incorporated.

All information contained in this document is subject to change without notice.
©2022 GBT GmbH

References

• International.com
• AGFAPhoto – Innovator for consumer imaging products worldwide
• GBT GmbH | Willkommen bei GBT International
• AgfaPhoto Powerstations und Solarpanels für unterwegs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>