Danfoss Icon Master Controller 24V Instruction Manual
- June 22, 2024
- Danfoss
Table of Contents
Danfoss Icon Master Controller 24V
Product Information
Specifications:
- Product Name: Danfoss IconTM 24V Master Controller
- Power Supply: 24V
- Manufacturer: Danfoss
Product Usage Instructions
Installation
Follow the installation guide provided in the manual to set up the Danfoss IconTM 24V Master Controller.
Optional Installations
Refer to the manual for optional installation procedures.
System Configuration
- Select INSTALL mode to include thermostats.
- Perform TEST NETWORK and confirm.
- Switch to RUN mode after completing the test.
- Perform APP TEST on the main system controller.
- Change the secondary controller type as needed.
Operating Modes
The Danfoss IconTM 24V Master Controller supports various operating modes including Cooling mode (requires an extension module).
Energy Saving Tips
- Ensure the condensation point sensor is inactive.
- Use floor sensors with room thermostats.
- Control radiators with thermal actuators connected to IconTM.
Configuration
- Select the allocated actuators for room configuration.
- Identify room thermostat outputs using ME.3 for ease of use.
Removing a Faulty Thermostat
Refer to the manual for steps to uninstall a faulty thermostat.
Frequently Asked Questions
- Q: How do I change the secondary controller type?
- A: Press and hold the button on the secondary controller for 1.5 seconds. Follow on-screen instructions or refer to the manual for details.
- Q: What are the minimum requirements for room thermostats?
- A: Room thermostats should have floor sensors, at least 2 allocated outputs, and control radiators using thermal actuators connected to IconTM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>