weboost Drive Sleek Vehicle Signal Booster Installation Guide

September 18, 2024
Weboost

Drive Sleek Vehicle Signal Booster

“`html

Product Information

Specifications:

  • Product Name: Drive Sleek Vehicle Signal Booster
  • Compatibility: Works with all vehicles
  • Cable Length: 15ft. fixed cable
  • Power Source: 12V CLA port

Product Usage Instructions

Installation Overview

Follow these steps to install the Drive Sleek Vehicle Signal
Booster:

Step 1: Mount Outside Antenna

  1. Identify a suitable location on the top of your vehicle away
    from windows.

  2. Clean the surface for antenna placement.

  3. Mount the outside antenna either directly or using the adhesive
    disk provided for aluminum roofs.

Step 2: Route & Connect Booster

  1. Route the cable into your vehicle based on the vehicle type
    (Car/Sedan, SUV/Van/Hatchback, Truck).

  2. Connect the cable from the outside antenna to the booster port
    labeled ANTENNA.

Step 3: Route Cable To Front Of Vehicle

Route the 15ft. fixed cable from the booster to the front of the
vehicle where the cradle will be located.

Step 4: Connect System To Power

  1. Connect the power supply to the 12V CLA port on your vehicle
    and route the power cable back to the booster.

  2. Connect the power cable to the booster port labeled.

Step 5: Insert Phone Into Cradle

Insert your phone into the cradle provided, ensuring not to use
the phone in the cradle next to your ear as per FCC
regulations.

Frequently Asked Questions (FAQ)

Q: Can I use this booster with any type of vehicle?

A: Yes, the Drive Sleek Vehicle Signal Booster is compatible
with all vehicles.

Q: How should I clean the surface before mounting the outside

antenna?

A: Use a clean cloth with a mild cleaning solution to wipe the
surface before mounting the outside antenna.

“`

Installation Guide
Drive Sleek
Vehicle Signal Booster
Use our weBoost App to guide you through the installation. See inside page for more details.

Download the weBoost App
Use our app to guide you through setting up a weBoost cell phone signal booster in your home, business, or vehicle. Boost every network, including
5G, right away.

Index
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 STEP 1 Mount Outside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 STEP 2 Route & Connect Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 STEP 3 Route Cable To Front Of Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 STEP 4 Connect System to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STEP 5 Insert Phone Into Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Measuring Booster Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Package Contents

Sleek Cradle

Outside Antenna

Signal Booster & Power Supply

Magnetic Vent Mount (for Cradle)

Adhesive Magnetic Dash Mount (for Cradle)

1

Installation Overview

Outside Antenna

Booster

Inside Antenna to power

WORKS WITH ALL VEHICLES

2

STEP 1 Mount Outside Antenna
Identify a location on the top of your vehicle that is:
· Near the center of the roof · At least 12 inches away from any
other antennas · At least 12 inches away from any
windows (including sunroofs)
Clean the surface where you will place the outside antenna.

12 in. away from windows (including sunroofs)

3

(STEP 1 cont.)
Mount the outside antenna by placing on top of vehicle.
NOTE: For aluminum roofs, an adhesive disk is included to mount the outside antenna (do not use if outside antenna will magnetize to the top of your vehicle).

route from any side

WORKS WITH ALL VEHICLES
4

STEP 2 Route & Connect Booster
Route the cable into the vehicle. See examples below. NOTE: The cable is strong enough that it may be shut in most vehicle doors without damaging the cable. Car/Sedan: Cable routed into rear side door. NOTE: When going through a car wash, remember to remove your antenna. SUV/Van/Hatchback: Cable routed into top of hatchback door. Truck: Cable routed into side door.
5

routed into rear side door
routed into top of hatchback door
routed into rear side door

(STEP 2 cont.)

Connect the cable from the outside antenna to the booster port labeled ANTENNA by simply pressing the connector in until you hear a “click”.
NOTE: Connecting cable from outside antenna to booster does not take much force.

cable from Outside Antenna

Booster

6

(STEP 2 cont.)
The included Velcro® can be used to mount the booster out-of-the way on the floor under a seat or mounted to the side of the trunk. It is best to mount in a place where the cables cannot be tripped over or snagged (damaging the booster).
NOTE: The “hook” side of the Velcro® (already on the booster) can be used to attach to the carpet of many vehicles.

bottom side of Booster

Velcro®

7

STEP 3 Route Cable To Front Of Vehicle
We recommend routing the 15ft. fixed cable from the booster, under mats and between seats up to the front of the vehicle where the cradle will be located.

to front of vehicle

8

(STEP 3 cont.)
Connect booster cable to cradle cable.

Cradle

9

snap-in connectors

STEP 4 Connect System To Power
Connect the power to the 12V* CLA port on your vehicle and route power cable back to the booster.
NOTE: We recommend routing with the same path as the cradle/booster cable (under mats and between seats). Cable clips are provided to help route & secure the cables.

connect power supply to 12v port

connect to Booster

10

(STEP 4 cont.)
Connect power cable to booster port labeled .
NOTE: The booster will be on whenever there is power from the 12V CLA port. If your vehicle always has power going to this port, you may want to unplug this when you’re not driving so the booster does not drain your battery. *Only 12V ports are supported.

Booster cable from Power Supply

11

STEP 5 Insert Phone Into Cradle

Make sure you have plenty of slack in the cable going up to the cradle (Velcro® straps included to manage excess cable). Insert your phone into cradle and watch your signal increase!
NOTE: A Magnetic Vent Mount & Adhesive Magnetic Dash Mount are provided which provides a versatile, safe and functional smartphone solution.
IMPORTANT: The FCC requires to never use the cell phone in the cradle next to your ear.

insert phone into Cradle to boost signal

Cradle extends
Adhesive Dash Mount

12

Measuring Booster Performance
We’ve created an easy way to learn your signal strength and compare it before and after a booster. Download our free weBoost app to get accurate decibel measurements to help you get the best performance from your system.
13

(Measuring Booster Performance cont.)

Signal Strength (dBm) with weBoost system powered OFF: (dBm here)
Signal Strength (dBm) with weBoost system powered ON: (dBm here)

Compare Results
Compare the decibels (dBm) on the chart below to find what signal strength you fall into.

Signal Strength

Excellent

Good

Fair

Poor

Dead Zone

3G/1x

-70dBm

-71 to -85dBm -86 to -100dBm -101 to -109dBm

-110dBm

4G/LTE

-970dBm –9711ttoo–18055ddBBmm –18066ttoo–110100ddBBmm –11011 to -11099ddBBmm

-1210dBm

-90dBm -91 to -105dBm -106 to -110dBm -111 to -119dBm

-120dBm

Did you know a signal increase of just 3dB is 2 times the power and signal amplification!

Gain Improvement Signal Improvement

3dB 6dB 10dB 20dB

2X 4X 10X

100X

14

Troubleshooting
Solid White (LED on cradle) This indicates that your booster is functioning properly and at maximum gain.
Light Off (LED on cradle) Check/secure power connections to the CLA, booster, and cradle. If light shuts off, remove from vehicle port and plug back in to reset the system. For any questions or assistance contact our weBoost Customer Support Team (1-866-294-1660).
Dropped Calls If you are regularly experiencing dropped calls in the same areas, turn off VoLTE/HD Voice in your phone’s settings.

1-866-294-1660 15

www.weboost.com

support@weboost.com

Safety Guidelines
Use only the Power Supply provided in this package. Use of a non-weBoost product may damage your equipment. FCC requires to never use the cell phone in the cradle next to your ear. RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e., MUST NOT be installed within 20 cm of) any person. You MUST cease operating this device immediately if requested by the FCC (or ISED in Canada) or licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
16

(Safety Guidelines cont.)
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05, SEE BELOW: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
17

Antenna Info

The following accessories are certified by the FCC to be used with the Drive Sleek.
This radio transmitter 4726A-460035 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Outside antenna maximum permissible antenna gain (dBi) 50

BAND 12/17 2.9

BAND 13 1.2

BAND 5 2.5

BAND 4 2.8

BAND 25/2 6.1

FIXED INSIDE ANTENNA KIT OPTIONS

Kit #

Coax Type

Ln(ft) Antenna Type

311251

RG-174

4

Cradle Antenna

50

FIXED OUTSIDE ANTENNA KIT OPTIONS

Kit #

Coax Type

Ln(ft) Antenna Type

311215

LMR-100

10

Mini-Mag SMB

50

211229

RG-58

15

4G Trucker

50

311230

RG-6

25

4G RV OTR

75

314405

RG-58

14

4G NMO

50

18

Specifications

Drive Sleek

Model FCC IC Frequency

460035 PWO460035 4726A-460035 698-716 MHz, 729-756 MHz, 777-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz

Power output for single cell phone (Uplink) dBm

700 MHz B12/17 18.74

700 MHz B13 21.57

800 MHz B5 22.65

1700 MHz B4 25.56

1900 MHz B2 19.19

Power output for single cell phone (Downlink) dBm

2.1

2.1

-2.5

2100 MHz B4 -0.6

2.5

Noise Figure Power Requirements

5 dB (nominal) 12 V 1.5 A / USB 5V 2.1 A

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with Part 15 of FCC rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.

19

2 YEAR WARRANTY
weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by weBoost. weBoost shall, at its option, either repair or replace the product. This warranty does not apply to any Signal Boosters determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Replacement products may include refurbished weBoost products that have been recertified to conform with product specifications. RMA numbers may be obtained by contacting Customer Support.
DISCLAIMER: The information provided by weBoost is believed to be complete and accurate. However, no responsibility is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.
20

3301 East Deseret Drive, St. George, UT

1-866-294-1660

www.weboost.com

support.weboost.com

Copyright © 2017 weBoost. All rights reserved. weBoost products covered by U.S. patent(s) and pending application(s) For patents go to: weboost.com/us/patents

NOT AFFILIATED WITH WILSON ANTENNA

GDE000581_001_02.02.24

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Weboost User Manuals

Related Manuals