NINGBO 2A7Z4-FHN 10000mAh Magnetic Wireless Power Bank User Manual
- June 14, 2024
- Ningbo
Table of Contents
NINGBO 2A7Z4-FHN 10000mAh Magnetic Wireless Power Bank
Introduction
- Experience the convenience of magnetic wireless charging with this power bank.
- The powerful magnets ensure a secure connection to your devices, providing effortless and efficient charging at 15W without the need for cables or adapters.
- The built-in zinc alloy stand can make the power bank hold your phone vertically or horizontally, which supports a comfortable viewing angle.
Specifications
- Model: FHN
- Shell: PC + ABS
- Interface: USB-C
- Battery Capacity: 10000mAh/3.85V (38.5Wh)
- Input (USB-C): 5V-2.4A; 9V=2A (18W Max)
- Output (USB-C): 5V=3A; 9V=2.22A; 12V=1.67A (20W Max)
- Output (Wireless): 5W/7.5W/10W/15W
- Total Output: 5V=3A (15W Max)
Product Overview
- Power Button
- Wireless Charging Area
- USB-C Input/Output
- LED Digital Display
- Built-In Folding Stand
Packaging List
Important Instructions
- Charge this product by connecting its USB-C female port to a charger through a USB-C cable.
- Charge your device by connecting its USB-C female port to the device through a USB-C cable, such as a mobile phone, tablet, headphones, lamp, etc. Just attach your device on the wireless charging area of the product, and ensure that your phone or other devices are securely locked to the power bank. Start fast charging.
- Devices supporting wireless charging: iPhone 15, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 15 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max.
Notes
- Do not use the product in humid, high-temperature, or outdoor conditions.
- Do not pour water into the product and use the water-immersed one.
- Do not disassemble the product.
- Do not use the product if a damaged surface is found.
- Keep the in-use product out of reach of children to prevent accidents.
- Stop using the product immediately if there is significant heating.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used per the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
For more interesting information and events, please follow us on social media platforms:
Warranty Service
For warranty service or support, please contact the Vention team:
- Website: www.ventiontech.com.
- Email: vention@ventiontech.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>