NINGBO GT1 Helmet Wireless Earphone Instruction Manual
- June 1, 2024
- Ningbo
Table of Contents
**NINGBO GT1 Helmet Wireless Earphone Instruction Manual
**
Product Overview
Important Notice:
Before installing the headphones, follow the Quick Manual instructions to
connect your phone and listen to the sound and volume. If there is a large
difference in sound effect and volume after installing it on the helmet,
please adjust the position of the speaker in the helmet.
Phone features
Lighting/Voice Assistant
Charging mode
When the machine is turned on, plug in the charger and the machine will automatically shut down.
List of items
-
GT1 Host*1
-
Speaker microphone*1
-
Clip-on base*1
-
Velcro installation package*1
-
Type-C charging cable*1
-
Instruction manual*1
Power on/off
Power on
Power off
Pairing
Intercom pairing
Intercom connection conditions: one machine needs to be in intercom
receiving mode, one machine is in intercom transmitting mode, in order to be
paired.
Intercom mode lights: green indicator light flashes fast, enter the
transmitter mode, and voice prompts; green indicator light flashes slowly,
enter the receiver mode, and voice prompts; at this time, the two pairs of
connectivity, connectivity success, the intercom indicator light has been 15
interval blinking once, accompanied by intercom connected to the success of
the prompts, at this time you can talk to talk calls. Long press the volume up
and down to adjust the intercom volume.
First time connection: after the two machines are turned on, short press
the intercom key to enter intercom mode, at this time the two machines are in
the same mode intercom receiving mode, at this time you need to long press one
of the intercom key to make it enter intercom transmitting mode for intercom
pairing.
Talking back to the connection: two days have been connected to the
machine, just power on the machine, short press the talk back key to enter the
talk back mode, the two machines will be automatically connected.
Music features
Notes
- Do not put the product into the open flame to avoid explosion;
- Do not disassemble the product. Avoid damage to product electronics;
- Do not approach the sharp object, the object will cause damage to the product;
- Do not use for a long time, please place in a dry place.
instruction warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. ifthis equipment does cause harmful interference to radio or television reception. which can be determined by muting the equipment offhand on, the user is encouraged totry to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment. This device complies with Part 15 ofthe FcC Rules. Operation is subject to the following two conditions.
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>