NINGBO SP0610 UL Listed 10000 mAh Solar 15W Wireless Power Bank User Manual

NINGBO SP0610 UL Listed 10000 mAh Solar 15W Wireless Power Bank

Specifications:

• Dimensions: 165mm x 90mm x 55mm
• Capacity: 10000 mAh
• Solar Panel: 15W
• Wireless Charging: Yes
• Input Port: Type-C

Product Usage Instructions

Charging the Power Bank:

1. Using your mobile phone’s USB adapter, connect a USB cable to your phone’s USB adapter.
2. Using the Type-C connector, connect the other end of the USB cable to the IN port on the portable power bank.
3. Plug the USB adapter into the outlet to begin charging.

Charging Electronic Devices:
Note: Use only the accessory cable provided with the power bank or the cable included with your device by the manufacturer.

Safety Precautions:

• Avoid using a power supply or charger not recommended by the manufacturer to prevent fire or injury.
• Do not exceed the power bank’s output rating to avoid risks.
• Do not use a damaged or modified power bank as it may lead to unpredictable behavior.
• Do not disassemble the power bank; seek qualified service for repairs.
• Do not charge the power bank while using it to charge a device, and do not leave it unattended during charging.
• Disconnect the power bank when not in use.

FAQ:

• Q: Can I charge the power bank using solar energy only?
  A: The power bank can be charged using solar energy, but it is recommended to also charge it through a power outlet for optimal performance.

• Q: How long does it take to fully charge the power bank?
  A: The charging time may vary, but typically it takes several hours to fully charge the power bank depending on the charging method used.

• Q: Is it safe to leave the power bank charging overnight?
  A: It is not recommended to leave the power bank charging unattended for extended periods, including overnight, to prevent any potential risks.

• Model: SP0610

• Item No.: 7122-12BK

• Type-C Input: 5Vdc / 2.4A, 9Vdc / 2A, 12Vdc / 1.5A

• Solar input: 5Vdc / 0.2A

• Type-C / USB output: 5Vdc / 2.4A, 9Vdc / 2A, 12Vdc / 1.5A

• Wireless Output: 5W/7.5W/10W/15W

• Battery/Cell Capacity: 37Wh, 3.7V/10000mAh

• Product Capacity (USB-A / Type-C): 28Wh,5Vdc / 5600mAh

• Operating temperature: 5~40°C tor Charging 0~40°C for Discharging

CAUTION: Risk of Fire and Burns, don’t open, crush,  disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. Don’t heat above 45 °C or Incinerate. Follow Manufacturer’s Instructions
MADE IN CHINA

PRODUCT OVERVIEW

1. Power button
2. TYPE-C Input/output
3. Output( USB A-Type)
4. LED indicator(Wireless)
5. Wireless charging area
6. Carabiner
7. LED indicator (Solar)
8. LED indicator (advise of remaining charge – number of illuminated lights decreases as power supply dwindles.)
9. Solar panel

Button and Indicator

How to use

Instructions:

1. Charging the portable Power bank
   • Using your mobile phone’s USB adapter. Connect a USB cable to your phone’s USB adapter. Using the Type-C connector, connect the other end of the USB cable to the IN port on the portable Power bank. Plug the USB adapter into the outlet to begin charging.
2. Charging mobile phones and other electronic devices with USB output.
   • Connect to USB cable to your mobile phone/device using the appropriate connector. Connect the other end of the USB cable to the OUT port of the portable Power bank. Your mobile phone/device should display the status of charging.
   • Remove the USB cable from your mobile device when it is fully charged.
3. Charging mobile phones and other electronic devices with wireless output.
   To use the wireless charging mode the mobile device needs to be a Qi-enabled device. If necessary, enable wireless charging in the settings of your mobile device. Next simply stick your device to the charging area and the wireless charging will start.

Note: In order to charge device use only accessory cable (provided with power bank) or the cable included with your own device by the manufacturer.

IMPORTANT SAFETY PRECAUTION

WARNING – When using this product, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product.
2. Power bank main unit contains an internal lithium ion battery. Upon initial use or after a prolonged storage period, fully charge it once. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
3. Power banks are not allowed in checked luggage on commercial airline flights. Handle with care and dispose of in accordance to local regulations. Carry-on only.
4. To reduce the risk of injury, close supervision is necessary – when the product is used near children.
5. Do not put fingers or hands into the product.
6. Do not expose power bank to rain or snow.
7. Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
8. Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
9. Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
10. Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
11. Do not expose a power pack to fire or excessive temperature. Never store or use this product in temperatures below 32°F (0°C) or above 113°F (45°C).
12. Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that the safety of the product is maintained.
13. Do not charge the power bank while using the power bank to charge a device. Do not charge the power bank for more than 10 hours and do not leave unattended.
14. Disconnect the power bank when not in use.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

“This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.”
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
FCC ID: 2BCGV0002
IC: 31955-00001
HVIN: 001

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>