NINGBO 0011 Smart Card Item Locator User Guide

NINGBO 0011 Smart Card Item Locator

Specifications:

• Product Name: Smart Card Item Locator
• Compatibility: Apple devices with iOS, iPadOS, or macOS
• Functionality: Locate items using the Apple Find My app
• Compliance: FCC Part 15

Product Usage Instructions

Getting Started:

1. Power On / Off: Press the Item Locator’s function button once to power on (single beep) and hold for 3 seconds to power off (double beep).
2. Check for Updates: Ensure your Apple device has the latest iOS, iPadOS, or macOS for optimal functionality with the Find My app.

Find Item When Out of Range:

1. Notify when Left Behind: In the Find My app,select the Items tab, choose your Item Locator, enable Notify when Left Behind to get alerts when out of range.
2. Notify when Found: Enable Notify When Found to receive location updates when another Find My enabled device detects your Item Locator.

Resetting Your Item Locator:

1. Remove from Find My app: Open Find My app,select the Items tab, tap on the Item Locator, scroll to the bottom, and tap Remove item to confirm.
2. Factory Reset: Press the function button on the Item Locator four times rapidly, then hold it on the fifth press until you hear a chime to reset for pairing with a new device.

The Fine Print:
This device complies with FCC Part 15 regulations to ensure minimal interference during operation.

FAQ:

Q: Can I use this item locator with Android devices?
A: No, this Smart Card Item Locator is designed for use with Apple devices only.

Getting Started

1. Power On / off:
   Press your Item Locator’s function button once . to turn on- it should beep once indicating it is powered on .
   To power off, hold the same button for at least 3 seconds. You will hear 2 beeps indicating your Item Locator is powered off .

2. Check For Updates:
   To use the Apple Find My app to locate your Item Locator, the latest version of ios. iPados or macos is recommended .

Add Your Item Locator

1. Start the App
   Open Find MyM app on your supported iPhone or iPad .
   Allow notifications from the app .

2. Connect your tem Locator
   Power on your Item Locator .
   In Find Myapp, select the”Items”tab .
   Tap Add Item” then tap other Supported Items .
   Once your Item Locator is located, tap Connect .
   Choose a recognizable name and emoji for your item Locator and tap“Continue ”.
   Find My will ask for confirmation to add your Item Locator to your Apple ID- tap “Continue ”.
   Tap” Finish” and your Item Locator will be set up and ready to be connected to whatever item you wish to locate e.g. your keys .

Locate Your Item

1. Find Item Locator when it is Nearby
   Open Find MyM app and select the”Items”tab .
   Tap on your Item Locator from the list .
   Tap Play Sound” to make your item Locator beep.
   Tap Stop Sound” to stop the beeps once you find your item .

2. Find Item Locators Last Known Location
   Open Find My app and select the”Items”tab Tap on your item Locator from the list .
   Your Item Locator’s last known location will appear on the map as the emoj you chose during set up .
   To navigate to that last known location, tap Directions to open the Maps app .

Find Item When Out of Range

1. Enabling ” Notify when Left Behind
   Open Find MyM app and select the Items”tab.
   Tap on your Item Locator from the list .
   Under” Notifications” , enable the Notify when Left Behind”toggle.
   You will receive a notification when you leave your Item Locator behind and it’s no longer in range of your device .

2. Enabling” Notify when Found
   UnderNotifications” , enable the ” Notify When Found toggle .

When your item Locator is seen by another Find My enabled device, you will receive a notifcation of its updated location .

Note: ” Notify when Found” can only be activated when your Item Locator is out of range .

When Your Item is Lost

1. Enabling “Lost Mode”
   Open Find My app and select the Items”tab .

Tap on your item Locator from the list .
Under Lost Mode” , tap Enable .
A screen detailing Lost Mode will pop up, tap Continue .
Enter your phone number or email address and tap“Next”.
You may enter a message that will be shared with the person that finds your item .
Tap“Activate” to enable “Lost Mode ”.

Note: When” Lost Mode” is enabled. ” Notify When Found is automatically enabled .

Note: When” Lost Mode” is enabled, your Item Locator is locked and cannot be paired to a new device .

Resetting Your Item Locator

1. Remove the Item Locator from Find Mym app
   Open Find MyMapp and select the “Items”tab .
   Tap on your Item Locator from the list .
   Please ensure ” Lost Mode” is disabled .
   Scroll to the bottom of the screen and tap Remove item .
   A summary will open, tap ” Remove” to confirm .

2. Factory Reset Your Item Locator:
   After successfully removing the Item Locator from Find My app, press the Item Locator’s function button four times rapidly. you will hear a beep each time you press it and then hold it a fifth time until you hear a ringing chime .
   The Item Locator is now reset and ready to be paired to a new device .

But Wait… There’s More 07

1. charge:
   Use regular wireless charging equipment to charge the product wirelessly, the red light is always on when charging, and the light is off when fully charged。

2. Unwanted Tracking Detection:
   If your iPhone detects that an unknown Item Locator is traveling with you, it will send you a notification. A sound will start playing so you will be able to find it.
   These alerts are only activated when an Item Locator is not connected to its owners phone, so your partner’s Item Locator will not trigger a sound if they are with you.

The Fine Print
This device complies with part 15 of the FCC Rules:
Operation is subject to the following two conditions :

1. This device may not cause harmful interference .
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed .

This equipment has been tested and found to comply with the limits for a Class b digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation this equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>