NINGBO TSW-T411 Communication Stick Instruction Manual

TSW-T411 Communication Stick
Instruction Manual

Product description

1.1 Product composition
Unpacking, the product list includes 1 Wi-Fi stick, 1 instruction manual.
NOTE: If the stick has an internal antenna, there is no external antenna.
1.2 Product features

• Reliable performance
  – Wi-Fi, Bluetooth dual-channel communication capability, priority Wi-Fi channel work
  – The Wi-Fi stick complies with IP65 protection level e Multiple LED display status
  – Based on multiple indicator LEDs, it is easy to perceive the working status of the Wi-Fi stick

• Easy to install
  – Insert the Wi-Fi stick into the Com port of the device, and tighten the nut to complete the installation

• Simple configuration
  – Support Bluetooth or Access Point mode to config, easy t realize device networking
  – Support App side, button unbinding

1.3 Usage Scenarios
The communication stick is mainly used on the inverter or energy storage battery equipment to realize the data interaction between the equipment and the system.

Product information

2.1 Basic Information

2.2 Hardware specification

Wi-Fi connectivity| •802.11B/G/N20
•Channel 1-14@2.4GHz (CH1-11 for
US/CA, CH1-13 for EU/CN)
Support WEP/WPA/WPA2/WPA2 PSK (AES) security mode
---|---
Bluetooth| Bluetooth 4.2 Low Energy
Electrical Interface| RS485
mechanical interface| USB aviation connector

2.3 Software function

Key| Press and hold the button for 5 seconds, and after the three lights of STE, COM, and NET are on and off for 3 times, the Wi-Fi stick is unbound and in the state of waiting for network distribution
---|---
Number of connected devices| 1
Communication parameters| Default 9600bps, 8 data bits, no stop bit, 1 parity bit
Data Collection Interval| The default configuration is 5 minutes
Firmware upgrade| Firmware supports OTA upgrade
Download App| Enter the App name in the Android or Apple store to download the App

Pin definition

Communication stick (female) front view

Installation guide

3.1 Download App
According to the mobile phone operating system, find Smart Life in the Android or Apple store, download the App, register a personal account and log in.

3.2 Install the communication stick
Power off the device, unscrew the protective cap of the 4-core COM communication port of the device, align the gap, and plug in the communication stick. Tighten the nut to make sure the communication stick is in good contact with the device.
When  disassembling, please loosen the nut, and then pull out the communication stick. Do not directly turn the body of the communication stick with force, so as not to damage the communication stick

3.3 Communication stick config and login network

1. Turn o n the Bluetooth o n the mobile phone, enter the App, and select Add Device
2. App automatically discovers the device to be added, click Add
3. Enter the router SSID and password to be connected
4. Confirm, the App will be added automatically, and after completion, enter the device panel to view the data

Communication stick LED working status

normal status
Flashing| Flashing| Flashing| Press and hold the button for 5 seconds, and after the three lights of STE, COM, and NET are on and off for 3 times, the Wi-Fi stick is unbound and in the state of waiting for network distribution| normal status
Always on| Flashing| any state| The communication stick is reading device data| normal status
Always on| any state| Flashing| The communication stick is
communicating with the cloud| normal status
Always on| Off| any state| Abnormal communication between the communication
stick and the device| 1.Please reinsert the communication stick 2.Replace the communication stick to judge whether it is a communication stick problem or a device problem
Flashing| any state| Flashing| Abnormal communication between the
communication stick and the cloud| 1.Please check whether the router has power
2.Please check whether the external network of the router
is normal
Flashing| Off| Flashing| Abnormal communication between the communication stick and the device, and the cloud| Please refer to the above suggestions to troubleshoot

Warranty Policy

The after-sales service is strictly in accordance with the relevant laws, and the after-sales three guarantees service is implemented. The service content is as follows:

1. Within 7 days from the date of your receipt, if there is a performance failure of this product, you can enjoy the return or exchange service for free
2. Within 8 to 15 days from the date of your receipt, if the product has a performance failure, you can enjoy free repair or replacement service
3. Within 12 months from the date of your receipt, if there is a performance failure of this product, you can enjoy free maintenance services

Non-warranty policy

1. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid ingress, accident, modification, incorrect use of non-product accessories, or tearing, altering labels, anti-counterfeiting marks
2. The validity period of the three guarantees has exceeded
3. Damage caused by force majeure
4. Other damages or failures caused by problems other than product design, technology, manufacturing, quality, etc.

Declaration of Toxic and Hazardous
Substances in Electronic Products
Toxic and hazardous substances or elements

Part Name| Lead Pb| HG Hg| Cadmium Cd| Hexavalent chromium Cr (VI)| PBBs PBB| Polybrominated diphenyl ethers PBDE
---|---|---|---|---|---|---
Metal parts| X| 0| 0| 0| 0| 0
Plastic parts| 0| 0| 0| 0| 0| 0
Circuit board| X| 0| 0| 0| 0| 0
Power (if available)| X| 0| 0| 0| 0| 0
Appendix| X| 0| 0| 0| 0| 0

FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject t the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, ‘including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are ‘designed to provide reasonable protection against harmful interference in residential installation. This equipment  generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with ‘the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to ‘radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm from your body.

Declaration Of Conformity European Notice

Hereby, Ningbo Lingchi Technology Co.,Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/30/EU,2014/35/EU,2011/65/EU.
This product must not be disposed of as normal household waste, in accordance with EU directive for waste electrical and electronic equipment(WEEE-2012/19/EU) . Instead, it should be taken to the point of ale or municipal recycling point for disposal.

This table is prepared according to the provisions of SJ/T11364-2014 O: Indicates that the content of the toxic and hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T26572-2011
X : Indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T26572-2011
The numbers in this label indicate that the product’s environmental protection use period under normal use is 10 years, and some components may also have an environmental protection use perio mark, and the environmental protection use period is subject to  the number in the mark.
Certificate:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>