NINGBO 2ASYP-LDTSC LDTSC Wireless Remote Instructions

June 1, 2024
Ningbo

NINGBO 2ASYP-LDTSC LDTSC Wireless Remote

NINGBO-2ASYP-LDTSC-LDTSC-Wireless-Remote-product

Product Information

Specifications:

  • Product Name: TSC Remote Control
  • Model Number: TSC-RC001
  • Compatibility: Compatible with TSC devices
  • Power Source: 2 AAA batteries (not included)
  • Range: Up to 30 feet

Product Usage Instructions

1. Panel Button Functions:

The panel buttons on the TSC Remote Control serve different functions. Refer to the figure in the user manual to understand the specific functions of each button.

Frequently Asked Questions

Q: How do I replace the batteries in the TSC Remote Control?

A: To replace the batteries in the TSC Remote Control, follow these steps:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the compartment cover to open it.
  3. Remove the old batteries and replace them with two new AAA batteries, ensuring correct polarity.
  4. Close the compartment cover securely.

remote control usage instructions

  1. The function description of the panel buttons is shown in the figure
  2. Function description: Press and hold the button for 3 seconds to turn on the device, and the blue wireless indicator light will stay on. Automatically turn off power within 2 minutes without any operation. Press the OUT button and the blue indicator light will flash to release the winch rope. Press the IN button and the blue indicator light will flash. The winch will retract the rope.
  3. Remote control distance: 26 meters, frequency: 315MHz
  4. The transmitter should automatically shut down after 2 minutes of no operation after being turned on
  5. Transmission voltage: DC3.6V Receiver voltage: DC9-15V

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarant ee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environm ent. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Ningbo User Manuals

Related Manuals