Evjuicion B0CMCYQJ76 Portable EV Charger User Manual

Table of Contents

Evjuicion-B0CMCYQJ76-Portable-EV-Charger-product

Specification

Rate Current:
- A: 6A/8A/10A/13A/16A
- B: 10A/16A/20A/24A/32A
- C: 16A/20A/24A/32A/40A
Input Voltage: 110V~240V
Rate Frequency: 50Hz/60Hz
Waterproof Degree: IP67
Working Temperature: -25°C~+55°C
Withstand Voltage: 2000V
Shell Material: PC
Terminal Material: Copper Alloy Silver Plating
Flame Retardant Grade: UL94 V-0
Operating Humidity: 20%~85%
Mechanical Life: No-Load Plug In / Pull Out 10000 Times
Pressure Impact Force: Can afford 1m drop and 2t vehicle run over pressure
Cable Length: 25FT
Standard Certificate: IEC 62752, IEC 61851 TUV, CE, UKCA, FCC

Operating Instruction

How to start charging

Take out the charger and firmly insert the power plug into the wall-end outlet socket.
Press the button of CURRENT SETTING to adjust the required current, or press the button of TIME DELAY to adjust the charging time. The device will default to the last current setting when charging next time.
Insert the Charging plug (Car End) into the car side charging inlet. The device will start charging automatically while the READY/CHARGE POWER indicators are all green.

How to stop charging

Take out the EV Charging Gun from the car side after the car charging is complete.
Disconnect the power plug from the wall socket-outlet.
Pack up the EV charger cable and put it into the bag.

Security Protection

GOOD TO KNOW

This is a Mode 2 EV charging cable. Do not use it for EVs with other different inlet types.
Please check if the device is intact and items are accordance with the packing list when you receive the package.
Do not submerge the EV control box or EV charging connector in water.

FAQ

Q: Can I use this charger for EVs with different inlet types?
A: No, this charger is specifically designed for Mode 2 EVs. It is not compatible with other inlet types.
Q: What should I do if I receive a damaged device or missing items?
A: Please check the device and compare it with the packing list upon receiving the package. If there are any damages or missing items, contact customer support for assistance.
Q: Is the EV control box and charging connector waterproof?
A: No, they are not waterproof. Do not submerge them in water to prevent damage or malfunction.

( Level 2 EV Charging Cable)

Item	Mode 2 Portable EV Charger
**** Rate Current	A.6A/8A/10A/13A/16A

How to start charging

Step 1. Take out the charger and firmly Insert the power plug into the wall end outlet socket.
Step 2. Please press the button of “CURRENT SETTING” to adjust your required current. Or please press the button of “TIME DELAY ” to adjust your charging time. The device will default to the last current setting when we charge next time.
Step 3. Insert the Charging plug (Car End) into the car side charging inlet, the device start charging automatically while the READY/CHARGE、 POWER indicators are all green.

Step 1. Please take out the EV Charging Gun from car side after the car charging is complete.
Step 2. Disconnect the power plug from the wall socket-outlet.
Step 3. Pack up the EV charger cable and put into the bag.

GOOD TO KNOW

This is a Mode 2 ev charging cable don’t use it for EV’s other different inlet types.
Please check if the device is intact and items are accordance with the packing list when you receive the package.
Do not submerge the ev control box or ev charging connector in water.
Do not use the charger if the ev controller box is damaged.
Don’t charge if the wall socket is damaged, rusted, cracked or loosely connected.
Wipe with a clean and dry cloth if the plug gets dirty or wet.
The device must be grounded
Do not use this device with an extension cord or an adapter.
Do not place the charging cable near high temperature object when it is working.
Do not use this device with an extension cord or an adapter, Please do not disconnect the plugs while the ev charger is charging the vehicle.