GOLDEN LIGHTING 6933-5P Florence 5 Light Multi Light Pendant Instruction Manual
- June 11, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 6933-5P Florence 5 Light Multi Light Pendant
Product Specifications
- Model : 6933-5P
- Dimensions : 8′ x 30
- Weight : 5’9
- Material : Metal
- Maximum Wattage : 36W
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island:
Center a linear pendant over the island. If hanging pendants, use one
pendant for every 24 inches of the island. Fixtures should hang at least 30
inches above the countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30 inches above the table. Use a fixture that
is 12 inches narrower than the width of the table.
Pendants and Chandeliers in Open Areas:
The bottom should hang at least 7.5 feet from the floor. Allow clearance
for any opening doors.
We appreciate your business and hope you love your new light! For the best lighting in your space, remember to layer your lighting with task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs. Install lights with dimmers for better control over light output.
For identifying the fixture’s wires, match the fixture wires (Hot, Neutral, Ground) with the house wires (Hot, Neutral, Ground) based on color coding or labeling.
Assembly Instructions
- Prepare for installation by ensuring all parts are included.
- Assemble the fixture components following the provided diagram (A to S).
- Connect the fixture wires to the corresponding house wires (Hot to Hot, Neutral to Neutral, Ground to Ground).
- Finish the installation by securing the canopy and installing a light bulb as per specifications.
FAQ
-
How do I determine the appropriate height for pendant lights above my kitchen island?
- For pendant lights above a kitchen island, center a linear pendant or use one pendant for every 24 inches of the island. Ensure the fixtures hang at least 30 inches above the countertop.
-
Can I use dimmers with these lights?
- Yes, you can install dimmers with these lights to control the level of light output based on your preferences.
-
What should I do if I need replacement parts?
- Contact the place of purchase for customer service to arrange for replacement parts.
Thank You for Choosing Us for Your Lighting Needs!
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice.
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Assembly Instructions
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. From the parts bag remove the mounting strap assembly. One
end of nipple (F) should be attached to mounting strap (A) with washer (C) and
hex nut (D) in place. The other end should have canopy loop (H) attached.
Attach mounting strap (A) to the junction box using mounting screws (B) and a
screwdriver. Tighten securely. 2. Unscrew canopy loop collar (I) from canopy
loop (H). Pass canopy (G) over the mounted canopy loop to test the height.
Approximately half of the canopy loop’s exterior threads should be exposed,
and the canopy loop collar (I) should fit snugly onto the canopy loop (H).
Remove canopy (G) and adjust the height of nipple (F) and canopy loop (H)
until the desired height is reached.
ASSEMBLING THE FIXTURE
3. Feed the fixture wires from post (P) through nipple (O)(, deco cover
(N), nut (M), and top loop (L). Pull the wires until taut. Thread the nipple
(O) onto post (P). Attach the deco cover (N) onto nipple (O). Secure deco
cover (N) with nut (M). Thread top loop (L) on the remaining threads of nipple
(O). Pull wires until taut. 4. Measure to determine the correct number of
chain links needed for proper hanging height. If necessary, use a pair of
pliers to open and remove any excess chain. Attach one of chain connectors (K)
to each end of the chain (J). Use one end of the chain/chain connector to
attach to the top loop (L). Use the remaining chain/chain connector end to
attach to canopy loop (H). Close chain connectors (K) to secure. 5. Feed the
fixture’s wires from top loop (L) up through the chain (J) (every three links
or so), canopy loop collar (I), canopy loop (H), and canopy (G). Pull the
wires until taut. Gently slide canopy loop collar (I) and canopy (G) down onto
the chain/wires.
CONNECTING THE WIRES
6. Have an assistant support the fixture’s weight while completing the
wiring. Refer to the wiring diagram and attach the fixture’s wires to the
power supply wires from the junction box. Attach the fixture’s wires to the
power supply wires from the junction box. Connect Hot to Hot (transparent wire
with black inner thread, black, or smooth wire) Neutral to Neutral
(transparent wire with white inner thread, white, or ribbed wire), and Ground
to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector.
Make sure all twists are in the same direction. If there is no house ground
wire coming from the junction box, locate ground screw (E) on the mounting
bracket/mounting strap and wrap the fixture’s ground wire around the ground
screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires
and into the mounting bracket/mounting strap. Tuck the wires into the junction
box.
FINISHING THE INSTALLATION
7. Push canopy (G) up to the ceiling and slide canopy loop collar (I) up
beneath the canopy. Tightly thread canopy loop collar (I) onto canopy loop (H)
to secure canopy (G) in place. Install a light bulb (not included) into
sockets (S) in accordance with the fixture’s specifications. Do not exceed
maximum recommended wattage. Your installation is now complete. Turn on the
power and test the fixture.