GOLDEN LIGHTING 9128-FM10 BCB-OP Gabi Contemporary Brushed Champagne Instruction Manual
- June 11, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 9128-FM10 BCB-OP Gabi Contemporary Brushed Champagne
Product Information
Specifications:
- Model : 9128-FM10/9128-FM13
- Model Variants: 9128-FM13 WHT-OP
- Maximum Power : Not specified
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24 inches of island. Fixtures should hang at least 30 inches above
the countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30 inches above the table. Use a fixture that is
12 inches narrower than the width of the table.
Pendants and Chandeliers in Open Areas
- The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
- We appreciate your business and hope you love your new light!
- Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting. This ensures that your space will have both task and ambient lighting. Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic. Install the lights with dimmers that allow you to control the level of light output at any given moment.
- Get function and style! Browse our site for coordinating lights and expert lighting advice.
How to Identify the Fixture’s Wires
- Fixture Wires: Hot, Neutral, Ground
- House Wires: Hot, Neutral, Ground
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Assembly Instructions
For Customer Service, contact the place of purchase to arrange for
replacement parts.
IMPORTANT:
- PREPARING FOR INSTALLATION
- ASSEMBLING THE FIXTURE : No Assembly Required – This item arrives assembled and ready for installation. Please proceed to the next step.
- CONNECTING THE WIRES
- FINISHING THE INSTALLATION
Thank You for Choosing Us for Your Lighting Needs!
-
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of island. Fixtures should hang at least 30″ above the countertop. -
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table. -
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice.
How to Identify the Fixture’s Wires
- Hot : Smooth, Black, or Transparent with Black Inner Thread
- Ground : Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
Assembly Instructions
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. Mounting strap (B) contains several pairs of threaded
holes. Hold canopy (D) up to mounting strap (B). Line up the holes in canopy
(D) with the holes in mounting strap (B). Thread mounting screws (C) into
mounting strap (B) in alignment with these holes as shown in the above
diagram, as they will protrude from the mounting strap for later attachment to
the canopy. Remove the canopy (D) for now and set aside for later. Place
mounting strap (B) over the junction box and secure in place with mounting
screws (A). Tighten the screws securely with a screwdriver. Pull the house
wires through the center of mounting strap (B).
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
Lift canopy containing LED panel (D) up to the ceiling and align holes to fit
over protruding mounting screws (C). Lift canopy (D) up over mounting screws
(C) until the screw heads fit into the keyholes in the canopy (D) and you see
the screw heads protrude through the canopy (D). To secure the canopy (D) to
the mounting strap (B) twist the canopy (D) in the counter-clockwise direction
so that the mounting screws (C) are fitted into the canopy (D) keyholes until
secure. Twist glass (F) into the canopy (D) in the counter-clockwise direction
shown on the diagram above until secure. No light bulbs are needed as the LED
panel contains the light source needed for illumination. Your installation is
complete. Turn on the power and test the fixture.
FAQ
Q: What is the recommended height for pendant lights above a kitchen
island?
A: Pendants should hang at least 30 inches above the countertop.
Q: How do I identify the different wires of the fixture?
A: The fixture wires typically include Hot, Neutral, and Ground wires. The
house wires will also have Hot, Neutral, and Ground components.
Q: What should be considered when installing pendants and chandeliers in
open areas?
A: Ensure that the bottom of the fixture hangs at least 7.5 feet from the
floor and allow clearance for any opening doors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>