SHPAVVER MS-687 Detachable Head Shaver Instruction Manual

SHPAVVER MS-687 Detachable Head Shaver Instruction Manual

CAUTION

1. The device needs to use a USB charging cable.
2. You can use the DC 5V1A adapter mobile phone charger, or aUSB interface of cars,computers and others for charging
3. If the charging cable isn’t work/broken, please replace the cable with a new one to avoid the danger.
4. This device should be charged and stored between 5°C-35°C.
5. Please make sure the port of the charger is dry before charging. Do not plug& unplug charger with wet hands to prevent electric shock.
6. Check whether the blade cover is damaged or deformed before use to avoid damage to the skin.
7. Use clean flowing water to clean the electric razor, do not soak it in water for a long time.
8. Do not use salt water, hot water above 60°C, thinner, gasoline, alcohol or other chemicals to clean the electric razor.
9. It is necessary to ensure that the electric shaver is protected with a cover on its aluminum blade while traveling.
10. During using or charging, the electric shaver may become slightly warm. It’s normal, please feel free to use it.
11. Do not charge the electric shaver for too long.
12. Do not put the electric shaver in direct sunlight or near heat sources.

Warning : Please unplug the power cord before cleaning the body part of the device.

ACCESSORIES LIST

1. Product Body
2. 7D Uni body Disassembly Shaver Head
3. USB Cable
4. Cleaning brush
5. User Manual

SPECIFICATIONS

CHARGING INSTRUCTIONS

1. Please use a 5V/1A charger or charging port to power the product;
2. The product has built-in over voltage protection parts, when using a charger or charging port greater than 7V to charge the product, the product built-in program will automatically stop charging the device;
3. Starting the “over voltage protection” function there is no damage to the product, you only need to match the appropriate charger or charging port to power the product normally.

SCREEN DISPLAY

1. Power display and charging reminder
   The screen will show “100%” when fully charged, when the power is less than 10%, the charging reminder icon will light up. PS: this device supports normal use during the charging process.
   

2. The memory function
   allows you to directly enter the last used speed gear when you reopen the device.
   

3. Gears Switching
   The device has two built-in speed gears, the high-speed gear shows “7500RPM” and the low-speed gear shows “7000RPM”. Button operation as follows: a/ Click the switch button, the device is turned on to enter the last used gear Imemory function), click the button within 5 seconds to switch the speed gear, continue to click to turn off the device; b/ Click the switch button, the device is turned on into the last used gear (memory function), click the button after 5 seconds to turn off the device, click again, then enter the next speed gear.
   

4. Clogging shutdown function:
   Clogging protection function is mainly for the case of clogging of the blade head. When the electric shaver overload, it will automatically shut down, should be cleaned before using the device.

HOW TO USE

Shave your beard and head

1. Press the on/off button to turn on the electric shaver.
   

2. Move the blade of the electric shaver over the skin in the direction of the beard growth, making straight and reciprocating movements.
   

3. The hairs on the neck can also be shaved off.
   

4. Before haircut, please wash your head with warm water and wait for your hair to dry before proceeding to the next step. In order to achieve better results, if you need to clean the head during the haircut, please use a brush and clean the head again after the haircut is completed.
   

After shaving is completed
Press the on/off button again to turn off the electric razor. After use, please use the plastic cover to protect the razor head to avoid damaging the shaver head aluminum foil.

NOTE
If the shaving head is damaged, please do not continue to use it to avoid damaging. your skin; please immediately replace the shaving head with our original equipment, which you can buy in the store of that shaver

CLEANING AND DAILY CARE

1. Before cleaning, please be sure to unplug the USB charging cable and make sure the device is off.
2. This product is an one-piece magnetic head design, just gently break off the head by hand to complete the overall disassembly.
3. The electric shaver can be washed directly in water (Figure 13), but please do not immerse it in water for a long time.
4. After washing, drain the excess water, place horizontally and air dry. Do not use paper towels or cloth to wipe the razor head part, otherwise it will cause damage.
5. Please air dry the electric shaver first and then cover it with a protective cover to prevent damage to the shaver head aluminum foil and to avoid dust accumulation.

Replace the razor head
For a good experience, the razor head should be replaced at least once every 6 months. Razors can have a long life if there is no damage caused by human factors. Only use the original shaving head for replacement.

CUSTOMER SERVICE DEPARTMENT

We offer a 1 year warranty and a lifetime of friendly customer service! If you have any questions, please contact us through Amazon “Contact Seller” or the brand’s after-sales email ([email protected]), we will be happy to help you and guarantee a 100% satisfaction solution.
Have a question? Please contact us first
Contact the seller
(MS [email protected])

Made in China

Documents / Resources

| SHPAVVER MS-687 Detachable Head Shaver [pdf] Instruction Manual
MS-687 Detachable Head Shaver, MS-687, Detachable Head Shaver, Head Shaver, Shaver
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>