BEGA 71 337 Cylindrical Shield Instruction Manual
- June 10, 2024
- BEGA
Table of Contents
BEGA 71 337 Cylindrical Shield
Product Information
Specifications:
- Material: Stainless steel
- Weight: 0.3 kg
Product Usage Instructions:
Safety:
The manufacturer does not accept liability for damage resulting from improper
use or installation. Any modifications made to the luminaire should be the
responsibility of the person making the modifications.
Installation:
- Undo the hexagon socket screw using a 3mm wrench.
- Insert the shield into the groove in the floodlight housing.
- Align the shield properly.
- Secure the shield in place.
Frequently Asked Questions
Q: What is the material of the shield?
A: The shield is made of stainless steel.
Q: What is the weight of the shield?
A: The shield weighs 0.3 kg.
Q: Is it necessary to use a specific tool for installation?
A: Yes, a 3mm wrench is recommended for tightening the hexagon socket screw during installation.
Application
Push-on shield for the lateral shielding of stray light.
Suitable for BEGA performance floodlights
- 85 126 · 85 132 · 85 138 · 85 143 · 85 145
- 85 147 · 85 150 · 85 155 · 85 160 · 85 165
- 85 167 · 85 169 · 85 173 · 85 175 · 85 232
- 85 233 · 85 238 · 85 239
Product Description
- Surround made of stainless steel
- Steel grade no. 1.4301
- Colour graphite or silver
- – Conformity mark
- Weight: 0.3 kg
Safety
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Undo the hexagon socket screw (wrench size 3 mm) and insert the shield into the groove in the floodlight housing.
- Align the shield and secure it in place.
Contact Information
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>