Procet PT-PTC-D-AF Ethernet Adaptor Instruction Manual
- June 3, 2024
- PROCET
Table of Contents
Procet PT-PTC-D-AF Ethernet Adaptor Instruction Manual
Introduction
PT-PTC-D-AF is a network power adapter designed based on the IEEE802 .3af standard.
The output is a standard Type-C in terface, which can provide 5V/2A power
supply and 100Mbps Internet data transmission.
PT-PTC-D-AF is designed with a small volume of a white plastic case, which is
convenient since it can be carried around on the desktop or can be Fixed and
opened for use. The input and output of the device do not exceed the safe
voltage of 57V, and there is no need for electric shock protection.
The product has passed the EU CE certification.
The device needs to be used in a wired network environment that supports
IEEE802.3af, plug and play without configuration, and the output supports
PD3.0 fast charging protocol, which can provide continuous power supply and
stable network connection to low-power mobile devices such as mobile phones,
game consoles, and tablet computers.
Product Description
-
RJ45 Port Power Supply LED Indicator (Yellow)
Light On: Normal power supply
Light Off: Abnormal power supply -
Type-C Port Data Transmission LED Indicator (Green)
Light On: Normal connection
Blinking: Data transfer
Light Off: Abnormal connection -
100Mbps RJ45 Port
-
Type-C Port
| |
---|---|---
Input| Input| 44-57V DC
PoE Compliance| IEEE802.3 af
Pin Assignment| 4/5(+),7/8(-) Or3/6(+),1/2(-) Or 3/6(-),1/2(+)
Output| Output| 5V 2.0A
Data Speed| 100Mbps
Work Environment| Operating Temperature| -20℃ To 40℃
Operating Humidity| 20%-80%，No Condensation
Operating Altitude| Below2000m
Storage Temperature| -20℃-70℃
Storage Humidity| 10%-90%，No Condensation
Internet Protocol| IEEE802.3u
Network Transmission| 100BASE-TX| Cat5 Or above UTP（≤100m）
Certificate| CE
IP Class| IP40
Dimensions| 65mm×29mm×17mm
LED|
Green
| Light On: Normal connection
Light Off: Not connected or failed to connect Blinking: Data transfer
---|---|---
Yellow
| Light On: Normal power supply
Light Off: Abnormal power supply
EMC| FCC| FCC CFR47 Part 15
CE
| EN 55032-2015
EN 55035-2017
Product Dimensions
Notice
- Connect the PoE network cable to the RJ45 port of this Power Adaptor, use a CAT5 or above network cable, and the length should be less than 100m.
- Connect one end of the Type-C cable to the output port of this product, and the other end to the powered device (Such as a mobile phone, tablet computer,etc.)
- If you need to replace the Type-C cable, please purchase a genuine cable that supports 100Mbps data transmission.
Declaration of Toxic and Hazardous Substances
Item| 《 Measures for the Administration of the Restricted Use of the
Hazardous Substances Contained in Electrical and Electronic Products 》
Restricted Substances or Elements
---|---
Pb| Hg| Cd| Cr VI| PBB| PBDE
Metal Parts| ×| ○| ○| ○| ○| ○
Plastic Parts| ○| ○| ○| ○| ○| ○
PCB| ×| ○| ○| ○| ○| ○
Element Parts| ×| ○| ○| ○| ○| ○
Paper Accessories| ○| ○| ○| ○| ○| ○
This form is prepared in accordance with the provisions of SJ/T 11364 -2014.
○ Indicates that the content of this hazardous substance in all homogeneous
materials of this par is with in the limit requirements specified in GB/T26572
-2011.
× I t means that the content of the hazardous substance in at least one
homogeneous material of th part exceeds the limit requirement specified in
GB/T26572 – 2011. There is currently no mature alternative in the industry,
which meets the environmental protection requirements of the EU RoHS
directive.
- Before using the device, please be sure to read the manual carefully and perform standardized operations.
- This device is only used indoors, please place it in a ventilated and dry place.
This product should not be discarded after the expiration date or after
maintenance.
Please hand it over to a company qualified for the disposal of waste
electronic products.
Please refer to the national or local regulations on the disposal of WEEE for
the correct method.
Scan Me
Creative Lianjie Network Technolgy Co.Ltd
www.procetpoe.com