PROCET PTD2206002 PT-PTC-A-BT Ethernet Adaptor Instruction Manual
- June 3, 2024
- PROCET
Table of Contents
PT-PTC-A-BT Ethernet Adaptor
Fast Installation Manual
WWW.PROCETPOE.COM
Data Code:PTD2206002
Statement
Copyright ©2022 Creative Lianjie Network Technology Co., Ltd. Copy right, all
rights reserved.
The contents of this manual cannot be copied, plagiarised, or translated by
any company or individual without the express written permission of Creative
Lianjie Network Technology Co., Ltd. Meanwhile, it can not be spread for
profit in any way. (Electronic, Photocopying, Recording, etc.)
This product complies with the design requirements for environmental
protection, please do not dispose of this product as general garbage! Users
should dispose of it separately from household waste when throwing it away.
Sorting is helpful to save natural resources and reduce environmental
pollution.
Please dispose of in accordance with the disposal method of waste electronic
products in your area.
It is a registered trademark of Creative Lianjie Network Technology Co., Ltd.
Protected bylaw, infringement must be investigated.
The product specifications and technical contents of this manual are for
reference only and are subject to update without notice. It is only used as a
guide, unless there is a special agreement, and none of the statements made
constitute a warranty of any kind.
Product Profile
1-1. Product Display
PT-PTC-A-BT is a network power adapter designed based on the IEEE802 .3at standard. The output is a standard Type-C in terface, which can provide 5V/3A 9V/3A 12V/3A 15V/3A 20V/3A power supply.
PT-PTC-A-BT is designed with a small volume of a white plastic case, which is
convenient since it can be carried around on the desktop or can be fixed and
opened for use. The input and output of the device do no t exceed thesafe
voltage of 57V, and there is no need for electric shock protection. The
product has passed the EU CE certifiction.
The device needs to be used in a wired network environment that supports
IEEE802.3bt, plug and play without configuration, and the output supports
PD3.0 fast charging protocol, which can provide continuous power supply to
lowpower mobile devices such as mobile phones, game consoles, and tablet
computers.
Product Working Diagram
-
RJ45 Port Input Power Supply LED Indicator (Yellow)
Light On: Normal power supply
Light Off: Abnormal power supply -
Type-C Port Output Power Supply LED Indicator (Green)
Light On: Normal connection
Light Off: Abnormal connection -
RJ45 Port
2-1 Product Working Diagram -
Type-C Port
| Input | Input | 44-57V DC |
|---|---|---|
| PoE Compliance | IEEE802.3 bt | |
| Pin Assignment | 4/5(+),7/8(-) Or3/6(41/2(-) Or 3/60,1/2(4-) | |
| Output | Output | 5V 3A 9V 3A 1 2V 3A 1 5V 3A 20V **** 3A |
| Data Speed | None | |
| Work Environment | Operating Temperature | -20°C To 40°C |
| Operating Humidity | 20%-13096. No Condensation | |
| Operating Altitude | Below2000m | |
| Storage Temperature | -20°C-70°C | |
| Storage Humidity | 1096-90%, No Condensation | |
| Internet Protocol | None | |
| Network Transmissim | None | |
| Certificate | CE | |
| IP Class | IP40 | |
| Dimensions | 100mmx60mmx22mm | |
| LED | Green | Light On: Normal connection |
Light Off: Not connected or failed to connect
Blinking: Data transfer
Yellow| Light On: Normal power supply
Light Off: Abnormal power supply
EMC| FCC| FCC CFR47 Part 15
CE| EN 55032-2015
EN 55035-2017
Product Dimensions
Pic3-1 Product Dimensions
Product Use
Pic5-1 Product Connection Diagram
Notice:
- Connect the PoE network cable to the RJ45 port of this Power Adaptor, use a CAT5 or above network cable, and the length should be less than 100m .
- Connect one end of the Type-C cable to the output port of this product, and the other end to the powered device (Such as a mobile phone, tablet computer, etc.)
- If you need to replace the Type-C cable, please purchase a genuine cable that supports 100Mbps data transmission.
Declaration of Toxic and Hazardous Substances
Item| 《Measures for the Administration of the Restricted Use of the Hazardous
Substances Contained in Electrical and Electronic Products 》Restricted
Substances or Elements
---|---
Pb| Hg| Cd| Cr VI| PBB| PBDE
Metal Parts| X| O| O| O| O| O
Plastic Parts| O| O| O| O| O| O
PCB| X| O| O| O| O| O
Element Parts| X| O| O| O| O| O
Paper Accessoriei| 0| O| O| O| O| O
This form is prepared in accordance with the provisions of SJ/T 11364 -2014.
O Indicates that the content of this hazardous substance in all
homogeneous materials of this part is with in the limit requirements specified
in GB/T26572 -2011.
× It means that the content of the hazardous substance in at least one
homogeneous material of the part exceeds the limit requirement specified in
GB/T26572 – 2011. There is currently no mature alternative in the industry,
which meets the environmental protection requirements of the EU RoHS
directive.
- Before using the device, please be sure to read the manual carefully and perform standardized operations.
- This device is only used indoors, please place it in a ventilated and dry place.
This product should not be discarded after the expiration date or after
maintenance.
Please hand it over to a company qualified for the disposal of waste
electronic products.
Please refer to the national or local regulations on the disposal of WEEE for
the correct method.
Product Quality Certificate
Qualification Card
PASS
Creative Lianjie Network Technolgy Co.Ltd
www.procetpoe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>