PROCET PT-PTC-D-BT Ethernet Adaptor Installation Guide
- June 5, 2024
- PROCET
Table of Contents
PT-PTC-D-BT Ethernet Adaptor
Installation GuideWWW.PROCETPOE.COM
Statement
Copyright ©2022 Creative Lianjie Network Technology Co., Ltd.
Copy right, all rights reserved.
The contents of this manual cannot be copied, plagiarised, or translated by
any company or individual without the express written permission of Creative
Lianjie Network Technology Co., Ltd. Meanwhile, it can not be spread for
profit in any way. (Electronic, Photocopying, Recording, etc.)
This product complies with the design requirements for environmental
protection, please do not dispose of this product as general garbage! Users
should dispose of it separately from household waste when throwing i t away.
Sorting is helpful to save natural resources and reduce environmental
pollution.
Please dispose of in accordance with the disposal method of waste electronic
products in your area.
It is a registered trademark of Creative Lianjie Network Technology Co., Ltd.
Protected by law, infringement must be investigated.
The product specifications and technical contents of this manual are for
reference only and are subject to update without notice. It is only used as a
guide, unless there is a special agreement, and none of the statements made
constitute a warranty of any kind.
Product Profile
PT-PTC-D-BT is a network power adapter designed based on the IEEE802 .3at standard. The output is a standard Type-C in terface, which can provide 5V/3A 9V/3A 12V/3A 15V/3A 20V/3A power supply and 100Mbps Internet data transmission.
PT-PTC-D-BT is designed with a small volume of a white plastic case, which is
convenient since it can be carried around on the desktop or can be fixed and
opened for use. The input and output of the device do not exceed the safety
voltage of 57V, and there is no need for electric shock protection.
The product has passed the EU CE certification.
The device needs to be used in a wired network
an environment that supports IEEE802.3bt, plug, and plays without
configuration, and the output supports PD3.0 fast charging protocol, which can
provide continuous power supply and stable network connection to low-power
mobile devices such as mobile phones, game consoles, and tablet computers.
Product Working Diagram
-
RJ45 Port Power Supply LED Indicator (Yellow)
Light On: Normal power supply
Light Off: Abnormal power supply -
Type-C Port Data Transmission LED Indicator (Green)
Light On: Normal connection
Blinking: Data transfer
Light Off: Abnormal connection -
100Mbps RJ45 Port
-
Type-C Port
Product Working Diagram
| Input | Input | 44-57V DC |
|---|---|---|
| PoE Compliance | IEEE802.3 bt | |
| Pin Assignment | 4/5(+),718(-) Or3/6(+),1/2(-) Or 3/6(-),1/2(+) | |
| Output | Output | 5V 3A 9V 3A 12V 3A 15V 3A 20V 3A |
| Data Speed | 100Mbps |
Work
Environment| Operating Temperature| -20r To or
Operating Humidity| 2096-8096. No Condensation
Operating Attitude| Below2000m
Storage Temperature| -20cac
Storage Humidity| 1096-90%. No Condensation
Internet Protocol| IEEE802.3u
NetwaicTransmissior| 100BASE-TX| CatS Or above UTP ( s100m )
Certificate| CE
IP Class| IP40
Dimensions| 100mmx6Ommx22mm
LED| Green| Light On: Normal connection
Light Off: Not connected or failed to connect
Blinking: Data transfer
---|---|---
Yellow| Light On: Normal power supply
Light Off: Abnormal power supply
EMC| FCC| FCC CFR47 Part 15
CE| EN 55032-2015
EN 55035-2017
Product Dimensions
Product Use
Notice:
- Connect the PoE network cable to the RJ45 port of this Power Adaptor, use a CAT5 or above network cable, and the length should be less than 100m.
- Connect one end of the Type-C cable to the output port of this product, and the other end to the powered device (Such as a mobile phone, tablet computer, etc.)
- If you need to replace the Type-C cable, please purchase a genuine cable that supports 100Mbps data transmission.
Item| 《Measures for the Administration of the Restricted Use of the Hazardous
Substances
Contained in electrical and Electronic Products 》Restricted Substances or
Elements
---|---
Pb| Hg| Cd| Cr VI| PBB| PBDE
Metal Parts| ×| ○| ○| ○| ○| ○
Plastic Parts| ○| ○| ○| ○| ○| ○
PCB| ×| ○| ○| ○| ○| ○
Element Parts| ×| ○| ○| ○| ○| ○
Paper Accessories| ○| ○| ○| ○| ○| ○
This form is prepared in accordance with the provisions of SJ/T 11364 -2014.
○ Indicates that the content of this hazardous substance in all homogeneous
materials of this part is within the limit requirements specified in GB/T26572
-2011.
× It means that the content of the hazardous substance in at least one
homogeneous material of the part exceeds the limit requirement specified in
GB/T26572 – 2011. There is currently no mature alternative in the industry,
which meets the environmental protection requirements of the EU RoHS
directive.
- Before using the device, please be sure to read the manual carefully and perform standardized operations.
- This device is only used indoors, please place it in a ventilated and dry place.
This product should not be discarded randomly after the expiration date or
after maintenance.
Please hand it over to a company qualified for the disposal of waste
electronic products.
Please refer to the national or local regulations on the disposal of WEEE for
the correct method.
Creative Lianjie Network Technolgy Co.Ltd
www.procetpoe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>