OPT7 Black AURA RGB-W DRL LED Tube Headlights Projector -Bluetooth BUILT IN Full Color Installation Guide
- June 7, 2024
- OPT7
Table of Contents
RGBW BLUETOOTH
HEADLIGHTS
2009-2014 FORD F-150
INSTALLATI
× 2
HEADLIGHT HOUSING
× 1
BLUETOOTH CONTROL BOX
× 1
10FT EXTENSION CABLE
× 1
HARDWIRE POWER HARNESS
INSTALLATION
TOOLS NEEDED
SCREWDRIVERS (+ AND -)
SOCKET WRENCH
SOCKETS
STEP 1
Remove the 2 bolts on top of the headlight.
STEP 2
Release the plastic clip.
STEP 3
Remove the last bolt retaining the headlight
STEP 4
Pull forward to free the headlight assembly.
STEP 5
Unclip the electrical connectors on the back of the headlight housing.
STEP 6
Reattach the electrical connectors to the new headlight housing. Black and
Green Wires: Not needed a connection for DRL Tube to function. Ensure the
wires are tied up securely to ensure wires are organized and store away from
any metal surface.
STEP 7
Install the Aura Control Box by connecting the positive wire for a constant on
functionality (always on when battery is on) or an accessory wire (only on
when the vehicle is on) which can be found in the Fuse Box. Connect the
negative wire to a ground wire.
STEP 8
Connect the round connector from the headlight housings to the control box.
STEP 9
Line up the headlight housing mounting tabs and push rearward to seat it in
place.
STEP 10
Attach the 3 bolts to secure the headlight in place.
STEP 11
Replace the plastic clip.
STEP 12
Test out your headlights using the AURA App.
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
http://qr.w69b.com/g/rh6fcCIM0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>