ROHS Mini Digital Video Recorder Mini IR CCD Camera Instruction Manual

June 7, 2024
RoHS

Mini Digital Video Recorder and

Mini IR CCD Camera
Instruction Manual

ROHS CE FCC

Operating Instructions

Before operating the unit, Please read this manual thoroughly, and retain it for future reference .

Warning:

Be sure to read the following before using the recorder and the mini camera.

Attention

  • Whenever connect or separate the camera form the DVR , please power off DVR
  • Whenever plug in or pull out the sd from the DVR , Please power off DVR
  • To Prevent fire or shock hazard , do not expose the unit to rain or moisture.
  • To avoid the potential risk of data loss always copy data to a disk
  • Do not detach or rebuild and repair by yourself.
  • Do not knock the product strongly.
  • Please contact seller for any repairing matters.

LCD screen and mini camera

Be careful when placing the camera near a window or outdoors .
Exposing the LCD screen or the lens of camera to direct sunlight for ling period may cause malfunctions.

Features:

DVR

  1. Portable body camera
  2. Zoran Taiwan Chip
  3. 960*320 2.7 Inch LCD
  4. Video resolution 1080P@30fps,720P@60fps,480P@30pfs ( optional)
  5. Photo resolution: 16M,12M,5M,3M
  6. Motion Detection , Video Recording(Loop Recording) ,Tacking Photo(Continuous Shooting), Pre-Recording (5s)
  7. Power saving , automatic sleep
  8. 2.4g wireless remote control , 1-5 meters
  9. Built-in in 128 MB, support max 32 Gb SD card (1080P: 10 hours)
  10. Removable 2200mah Lithium battery , 4 hours life time , 35 hours standby, 4 hours charging
  11. AV , video out put to a big screen

Camera

  1. Button mini hidden camera
  2. Sensor 1/3 Inch 3Mpixels image sensor
  3. WDR Picture and Video quality
  4. 3.7MM 65 degree viewing
  5. 0.1Lux Low Illumination

Identifying the part of the mini DVR

Identifying the part of the mini DVR

Identifying the part of the mini DVR

Identifying the part of the mini DVR

Identifying the part of the mini DVR

Identifying the part of the camera

Identifying the part of the camera

Identifying the part of the camera

One touch record (audio & video)

4 types video record modes :

  1. DVR power on and switch the auto record key to left side , video record start . switch to right side, video stop recording and save ( when you switch to left side , when you power on , dvr will auto video record )
  2. DVR power on and click Rec. Button, video record start , click again , video stop recording and save .(do not work when the DVR lock )
  3. DVR power on and click remote record button , video start record, click again , video stop and save .
  4. Use the camera record button

LED indicator :

LED indicator :

Vibration indicator :

Vibration indicator :

Motion Detection/ Pre-recod 5s

Dvr power on ,open the Dvr menu , select Pre-Capture ( Motion Detection), After setting , press “   ”record key return to standby mode,DVR will change to motion detection mode(pre-record 5s) , shows on the bottom-left of the screen at the same time.(Note: motion detection need set again , when the dvr restart)

DVR setting menu :

  1. Photo resolution : 16M,12M,5M,3M

  2. Video resolution:1080P30,720P60,720P30,480P30

  3. Continue shot : ON , OFF

  4. Pre-Capture: Motion Detect , Manual, OFF

  5. Over write : ON , OFF
    Over write

  6. Vibration motor : ON , OFF

  7. Language: English ,简体中文,繁體中文,한국의,русс кий,日本の

  8. Auto LCD off: 45Sec, 30Sec,15Sec,OFF

  9. Auto sleep : 3Min, 2Min,1Min,Off

  10. Auto power off : 15Min, 10Min, 05Min, OFF

  11. Frequency: 50Hz ,60Hz

  12. TV standard: PAL , NTSC, LCD

  13. 2.4G Remoter: Set, Cancel

  14. Default: OK , Cancel

  15. Format: OK , Cancel

  16. Date/Time: 2013/05/20 +08 00:21:24

  17. User number: Set , Off

  18. Memory infos: movie, photo, free space, total space:

  19. Version: Ver:1.2.15

Playback :

Dvr power on ,click the playback , replay photos and video , click menu button , can delete the files or lock the files ( when you set Over write, the lock files will be save )

Palying back moving images on TV screen :

Playback

When the dvr power on , connect the dvr with TV screen via AV output cable.
Dvr power on ,open the Dvr menu , select TV standard ( choose PAL / NTSC).

Playing back oving images on PC :

  1. Take out the sd card , connect it with the computer via the card reader.
  2. Conect the Dvr with the camera via the USB cable , them DVR Power on .

DVR Power on

Accessories

DVR

DVR

Camera

Error Clear Operation

Error Clear Operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals