RayRun RM05 Umi Smart Wireless Remote Controller User Manual
- June 4, 2024
- RayRun
Table of Contents
Umi Smart Wireless
Remote Controller
Model: RM05
General Purpose Dimming & Color Control
Function
- Dim down / Change color
- Dim up / Change color
- Turn ON/OFF lights, Double -click to activate color changing. Tripe click to switch color mixing.
- Indicator
- Pair to receiver
*Hold press in 10 seconds once receiver powered on.
A Battery: CR2032
Operation
1. Pair the remote to receiver
The remote controller needs to be paired to receiver to work. User can pair up
to 5 remote controllers to one receiver and each single remote controller can
be paired to any receiver.
To pair a new remote to the receiver, please operate with following two steps:
1). Cut off the power of receiver and power on again after more than 5
seconds.
2). Hold press remote and key simultaneously and briefly within 10 seconds
after receiver powered on.
After this operation, the remote is paired to the receiver and ready to work.
2. Unpair the remote controller
To unpair the remote from the receiver, please operate with following two
steps:
1). Cut off the power of receiver and power on again after more than 5
seconds.
2). Hold press all 3 keys simultaneously within 10 seconds after receiver
powered on.
After this operation, the remote will be unpaired from receiver.
3. Adjust color
For working with multi-color receivers, user can double click the key to activate the color adjusting mode. After double click, the and and key will swap to color adjusting function shortly. The indicator will flash at the color adjusting mode. The up and down key will swap back to dimming function after no operation for a while.
4. Change RGB/White mixing mode
For RGB+White and RGB+CCT application, user can switch the color mixing mode
between white(CCT), RGB and White(CCT)+RGB mode.
To click the key for 3 times rapidly, the color mixing mode on receiver will
change.
Specification
Working voltage …………………… DC 3V, CR2032 battery
Wireless protocol …………………. Umi protocol based on SIG BLE Mesh
Frequency band ……………………. 2.4GHz ISM band
Wireless power ……………………… < 7dBm
Working temperature ……………. -20-55 °C(-4-131 °F)
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an
uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>