RoHS EmQ-i2401 Qseven R2.0 CPU Module Installation Guide
- June 3, 2024
- RoHS
Table of Contents
- RoHS EmQ-i2401 Qseven R2.0 CPU Module
- Technical Support
- Declaration of Conformity
- Packing List
- Ordering Information
- Optional Accessories
- Specifications
- Board Dimensions
- Heat Spreader Installation
- Connector Pin Assignment
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RoHS EmQ-i2401 Qseven R2.0 CPU Module
-
Form Factor
Qseven® CPU Module -
CPU
Intel® Celeron® N3350/ Pentium® N4200 Processor -
Video
Dual-Channel 24-bit LVDS/ DDI -
LAN
Intel® i210IT PCIe GbE controller -
Audio
HD Link -
I/O
USB2.0/ USB SuperSpeed/ SATA/ PCIex1/ SDIO/ I2C
Technical Support
If you have any technical difficulties, please consult the user’s manual first at: http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still can not find out the answer.
Declaration of Conformity
FCC Class A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Packing List
Before starting with the installation, make sure the following items are shipped:
Ordering Information
EmQ-i2401-N4200| Intel® Pentium® N4200 Qseven R2.0 CPU module w/ 4G memory
soldered on module, -20~85oC
---|---
EmQ-i2401-N3350| Intel® Celeron® N3350 Qseven R2.0 CPU module w/ 4G memory
soldered on module, -20~85oC
EmQ-i2401-WT- E3950| Intel® Atom® x7-E3950 Qseven R2.0 CPU module w/ 4G memory
soldered on module, -40~85oC
EmQ-i2401-WT- E3940| Intel® Atom® x5-E3940 Qseven R2.0 CPU module w/ 4G memory
soldered on module, -40~85oC
EmQ-i2401-WT- E3930| Intel® Atom® x5-E3930 Qseven R2.0 CPU module w/ 4G memory
soldered on module, -40~85oC
Optional Accessories
PBQ-900L | Qseven R2.0 w/ EPIC form factor Carrier Board |
---|---|
HS-2401-F1 | Heat Spreader, W/PAD, 70658mm for N-Series |
HS-2401-F2 | Heat Spreader, W/PAD, 70658mm for E-Series |
CBK-06-900L-00
| Cable kit:
2 x COM cables 1 x USB cable 1 x SATA cable
1 x SATA Power cable 1 x Audio cable
Specifications
Form Factor | Qseven® CPU Module |
---|---|
CPU | Soldered onboard Intel Celeron® N3350 2.4GHz processor/ Intel Pentium® |
N4200 2.5GHz processor
System Memory| Soldered onboard 4GB DDR3L SDRAM, upgradable to 8GB
BIOS| AMI BIOS, UEFI Code
USB| 4 x USB 2.0 ports
2 x USB 3.0 SuperSpeed ports
Expansion Bus| 4 x PCIex1 lanes, I2C Interface, SDIO
Storage| 2 x Serial ATA ports
Soldered onboard eMMC 5.0 16GB/32GB (OEM Request)
Ethernet controller| 1 x Intel® i210IT PCIe GbE controller
Audio| HD link
Graphics Chipset| Intergrated in Intel® Gen9 graphic
Graphics Interface
| Dual Channel 24-bit LVDS, with resolution up to 1920×1200
1 x DDI port
OS Support| Windows 10 64-bit Linux: Ubuntu
Power Requirement| DC 5V, 5VSB
Power Consumption| 2A@5V with N4200 (Typical with PBQ-900L)
Operating Temp.
| -20ºC ~ 85ºC(-4~185ºF)
-20ºC ~ 70ºC for EmQ-i2401D series
-40ºC ~ 85ºC(-40~185ºF) for EmQ-i2401-WT series
Operating Humidity| 10 ~ 95% @ 85°C (non-condensing)
Dimension (L x W)| 70 x 70 mm (2.76” x 2.76”)
Driver Installation Note
The CPU module supports Windows 10. To install the drivers, please visit our
website at www.arbor-technology.com and
download the driver pack from the product page. If you need driver DVD, please
contact your ARBOR sales representative.
Windows 10 (64-bit)
Driver | Path |
---|---|
Audio | \Apollolake-i240x\Audio\7687_PG436_Win10_Win8.1_Win8Win7 WHQLx64 |
Chipset | \Apollolake-i240x\Chipset |
Ethernet | \Apollolake-i240x\LAN |
Graphics | \Apollolake-i240x\Graphic |
Serial IO | \Apollolake-i240x\Serial |
IO\SerialIO_30.100.1620.02_APL_PV_Win10\x64
TXE| \Apollolake-i240x\TXE
Board Dimensions
Heat Spreader Installation
To install the heat spreader:
See the illustration below. Mount the heat spreader to the board. Fix the heat
spreader in place with fours screws
Connector Pin Assignment
Pin| Signal| Pin| Signal| | Pin| Signal|
Pin| Signal
---|---|---|---|---|---|---|---|---
1| GND| 2| GND| | 65| Q7_AZ_SDATA_IN| 66| I2C_CLK0
3| LAN1_MDI3-| 4| LAN1_MDI2-| | 67| Q7_AZ_SDATA_OUT| 68| I2C_DATA0
5| LAN1_MDI3+| 6| LAN1_MDI2+| | 69| THRM#| 70| WDTRIG#
7| LAN_LINK100#| 8| LAN_LINK_1000#| | 71| THRMTRIP#| 72| WDOUT(N/C)
9| LAN1_MDI1-| 10| LAN1_MDI0-| | 73| GND| 74| GND
11| LAN1_MDI1+| 12| LAN1_MDI0+| | 75| USB3TXN0| 76| USB3_RXN0
13| LED_LINK#| 14| LAN_ACT#| | 77| USB3TXP0| 78| USB3_RXP0
15| GBE_CTREF (N/C)| 16| SLP_S4#| | 79| USB_6_7_OC# (N/C)| 80|
USB_4_5_OC#(N/C)
17| WAKE#| 18| SLP_S3#| | 81| USB3TXN1| 82| USB3_RXN1
19| SUS_STAT#| 20| Q7_PWR_BTN#| | 83| USB3TXP1| 84| USB3_RXP1
21| SLEEP#| 22| LID#| | 85| USB_OC2/3| 86| USB_OC0/1
23| GND| 24| GND| | 87| USB_3N| 88| USB_2N
| KEY| | KEY| | 89| USB_3P| 90| USB_2P
25| GND| 26| CB_PWRGD| | 91| USB_CC(N/C)| 92| Q-7_USB_ID(N/C)
27| Q7_BATLOW#| 28| Q7_RSTBTN#| | 93| USB_1N| 94| USB_0N
29| SATA_TXP0_C| 30| SATA_TXP1_C| | 95| USB_1P| 96| USB_0P
31| SATA_TXN0_C| 32| SATA_TXN1_C| | 97| GND| 98| GND
33| Q7_HDD_ACT#| 34| GND| | 99| LVDS_A0+| 100| LVDS_B0+
35| SATA_RXP0_C| 36| SATA_RXP1_C| | 101| LVDS_A0-| 102| LVDS_B0-
37| SATA_RXN0_C| 38| SATA_RXN1_C| | 103| LVDS_A1+| 104| LVDS_B1+
39| GND| 40| GND| | 105| LVDS_A1-| 106| LVDS_B1-
41| BIOS_DISABLE#| 42| SD_CLK#| | 107| LVDS_A2+| 108| LVDS_B2+
43| SD_CD#| 44| SDIO_LED (N/C)| | 109| LVDS_A2-| 110| LVDS_B2-
45| SD_CMD| 46| SD_WP| | 111| Q7_VDDEN| 112| Q7_BKLTEN
47| SD_PWR#| 48| SD_DATA1| | 113| LVDS_A3+| 114| LVDS_B3+
49| SD_DATA0| 50| SD_DATA3| | 115| LVDS_A3-| 116| LVDS_B3-
51| SD_DATA2| 52| SDIO_DAT5 (N/C)| | 117| GND| 118| GND
53| SDIO_DAT4 (N/C)| 54| SDIO_DAT7 (N/C)| | 119| LVDS_A_CLK+| 120|
LVDS_B_CLK+
55| SDIO_DAT6 (N/C)| 56| RSVD (N/C)| | 121| LVDS_A_CLK-| 122| LVDS_B_CLK-
57| GND| 58| GND| | 123| Q7_LCD_BKLT_CTRL| 124| GP_1-Wire_Bus
__(N/C)
59| Q7_AZ_SYNC| 60| SMB_CLK_RESUME| | 125| LVDS_I2C_DAT| 126| eDP0HPD#/LVDS
___BLCDAT (N/C)
| | | SMB_DATA_RE- SUME| | | |
61| Q7_AZ_RST#| 62| | 127| LVDS_I2C_CLK| 128| eDP1HPD#/LVDS
___BLCCLK (N/C)
63| Q7_AZ_BIT_CLK| 64| Q7_SMB_ALERT#| | | |
| | | | | 129| CAN0_TX (N/C)| 130| CAN0_RX (N/C)
Pin| Signal| Pin| Signal
---|---|---|---
131| Q7_DDI0_TXP3| 132| RSVD (N/C)
133| Q7_DDI0_TXN3| 134| RSVD (N/C)
135| GND| 136| GND
137| Q7_DDI0_TXP1| 138| DDI0_AUXP
139| Q7_DDI0_TXN1| 140| DDI0_AUXN
141| GND| 142| GND
143| Q7_DDI0_TXP2| 144| RSVD (N/C)
145| Q7_DDI0_TXN2| 146| RSVD (N/C)
147| GND| 148| GND
Pin| Signal| Pin| Signal
---|---|---|---
197| GND| 198| GND
199| Q7_SPI_MOSI| 200| Q7_SPI_CS#0
201| Q7_SPI_MISO| 202| Q7_SPI_CS#1
203| Q7_SPI_CLK| 204| MFG_NC4 (N/C)
205| VCC_5V_SB| 206| VCC_5V_SB
207| MFG_NC0 (N/C)| 208| MFG_NC2 (N/C)
209| MFG_NC1 (N/C)| 210| MFG_NC3 (N/C)
211| VCC| 212| VCC
213| VCC| 214| VCC
215| VCC| 216| VCC
217| VCC| 218| VCC
219| VCC| 220| VCC
221| VCC| 222| VCC
223| VCC| 224| VCC
225| VCC| 226| VCC
227| VCC| 228| VCC
229| VCC| 230| VCC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>