RoHS EmSMK-i2403 SMARC R2.0 CPU Module Installation Guide

RoHS EmSMK-i2403 SMARC R2.0 CPU Module

Quick Installation Guide

Technical Support

If you have any technical difficulties, please consult the user’s manual first at: http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still can not find out the answer.

http://www.arbor-technology.com
E-mail: [email protected]

Declaration of Conformity

FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Packing List

Before starting with the installation, make sure the following items are shipped:

• 1 x EmSMK-i2403 SMARC CPU Module
• 1 x Quick Installation Guide

Ordering Information

EmSMK-i2403-E3950- 8GB| Intel® Atom™ Processor x7-E3950 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C
---|---
EmSMK-i2403-E3940- 8GB| Intel® Atom™ Processor x5-E3940 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C
EmSMK-i2403-E3930- 8GB| Intel® Atom™ Processor x5-E3930 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C

Optional Accessories

CBK-02-9015-00

| Cable kit:

1 x COM Cable 1 x SATA Cable

Specifications

CPU

| Soldered onboard Intel® Atom™ x7-E3950 1.6GHz Atom™ x5-E3940 1.6GHz Atom™ x5-E3930 1.3GHz Processor
Memory| Soldered onboard 8GB LPDDR4 SDRAM
BIOS| AMI BIOS
Watchdog Timer| 1~255 levels reset
USB| 6 x USB 2.0 ports

2 x USB 3.0 ports

Expansion| 4 x PCIex1 lanes, SDIO, I2S, I2C, SMBus
GPIO| 8-bit Programmable
Serial Port| 4 x UART ports

(2 x HSUART, 2 x UART )

Storage| 1 x Serial ATA port

Soldered onboard eMMC (OEM request)

Ethernet| 1 x Intel i210IT PCIe controller
Audio| HD Audio Link
Graphics Chipset| SoC integrated Intel Gen9 graphic
Graphics Interface| 1 x eDP, 1 x DP++, 1 x HDMI port
MIPI-CSI| 1 x MIPI-CSIx4 & 1 x MIPI-CSIx2 (OEM request)
OS Support| Windows 10

Linux

Power Requirement| +3~5.25V power input
Power Consumption| [email protected]

(X7-E3950 typical CPU module only)

Operating Temp.| -20 ~ 85ºC (-4 ~ 185ºF)
Operating Humidity| 10 ~ 95% @ 85ºC (non-condensing)
Dimension (L x W)| 82 x 50 mm

Driver Installation

The CPU module supports Windows 10. To install the drivers, please visit our web-site at www.arbor-technology.com and download the driver pack from the Down-load Center page. If you need login access, please contact your local ARBOR sales representative.

Board Dimensions

Heat Spreader Installation

To install the heat spreader:
See the illustration below. Mount the heat spreader to the board. Fix the heat spreader in place with fours screws.

Connector Pin Assignment

P-Pin| Primary (Top) Side| S-Pin| Secondary (Bottom) Side|  | P-Pin| Primary (Top) Side| S-Pin| Secondary (Bottom) Side|
---|---|---|---|---|---|---|---|---|---
P1| SMB_ ALERT_1V8#| S1| CAM1_SCL| P31| NC| S31| NC|
P32| GND6| S32| PCIE_D_RX+|
P2| GND1| S2| CAM1_SDA|
P33| SDIO_WP| S33| PCIE_D_RX-|
P3| CSI1_CK+| S3| GND25|
P34| SDIO_CMD| S34| GND30|
P4| CSI1_CK-| S4| RSVD5|
P35| SDIO_CD#| S35| USB4+|
P5| NC| S5| CAM0_SCL|
P36| SDIO_CK| S36| USB4-|
P6| GBE0_SDP| S6| CAM_MCK|
P37| SDIO_PWR_EN| S37| USB3_VBUS_DET|
P7| CSI1_RX0+| S7| CAM0_SDA|
P38| GND7| S38| AUDIO_MCK|
P8| CSI1_RX0-| S8| CSI0_CK+|
P39| SDIO_D0| S39| I2S0_LRCK|
P9| GND2| S9| CSI0_CK-|
P40| SDIO_D1| S40| I2S0_SDOUT|
P10| CSI1_RX1+| S10| GND26|
P41| SDIO_D2| S41| I2S0_SDIN|
P11| CSI1_RX1-| S11| CSI0_RX0+|
P42| SDIO_D3| S42| I2S0_CK|
P12| GND3| S12| CSI0_RX0-|
P43| SPI0_CS0#| S43| ESPI_ALERT0#|
P13| CSI1_RX2+| S13| GND27|
P44| SPI0_CK| S44| ESPI_ALERT1#|
P14| CSI1_RX2-| S14| CSI0_RX1+|
P45| SPI0_DIN| S45| NC|
P15| GND4| S15| CSI0_RX1-|
P46| SPI0_DO| S46| NC|
P16| CSI1_RX3+| S16| GND28|
P47| GND8| S47| GND31|
P17| CSI1_RX3-| S17| NC|
P48| SATA_TX+| S48| I2C_GP_CK|
P18| GND5| S18| NC|
P49| SATA_TX-| S49| I2C_GP_DAT|
P19| GBE_MDI3-| S19| NC|
P50| GND9| S50| HDA_SYNC|
P20| GBE_MDI3+| S20| NC|
P51| SATA_RX+| S51| HDA_SDO|
P21| GBE_LINK100#| S21| NC|
P52| SATA_RX-| S52| HDA_SDI|
P22| GBE_LINK1000#| S22| NC|
P53| GND10| S53| HDA_CLK|
P23| GBE_MDI2-| S23| NC|
P54| ESPI_CS0#| S54| SATA_ACT#|
P24| GBE_MDI2+| S24| NC|
P55| ESPI_CS1#| S55| USB5_EN_OC#|
P25| GBE_LINK_ACT#| S25| GND29|
P56| ESPI_CK| S56| NC|
P26| GBE_MDI1-| S26| NC|
P57| ESPI_IO_0| S57| NC|
P27| GBE_MDI1+| S27| NC|
P58| ESPI_IO_1| S58| ESPI_RESET#|
P28| NC| S28| NC|
P59| GND11| S59| USB5+|
P29| GBE_MDI0-| S29| PCIE_D_TX+|
P60| USB0+| S60| USB5-|
P30| GBE_MDI0+| S30| PCIE_D_TX-|
P61| USB0-| S61| GND32|
 |
P62| USB0_EN_OC#| S62| USB3_SSTX+|
P63| USB_VBUS_DET| S63| USB3_SSTX-|
P-Pin| Primary (Top) Side| S-Pin| Secondary (Bottom) Side|  | P-Pin| Primary (Top) Side| S-Pin| Secondary (Bottom) Side|
---|---|---|---|---|---|---|---|---|---
P64| USB0_OTG_ID| S64| GND33| P94| GND18| S94| DP0_LANE0-|
P65| USB1+| S65| USB3_SSRX+| P95| SMARCHDMI1 TXP1| S95| DP0_AUX_SEL|
P66| USB1-| S66| USB3_SSRX-|
P96| SMARCHDMI1 TXN1| S96| DP0_LANE1+|
P67| USB1_EN_OC#| S67| GND34|
P97| GND19| S97| DP0_LANE1-|
P68| GND12| S68| USB3+|
P98| SMARCHDMI1 TXP0| S98| DP0_HPD|
P69| USB2+| S69| USB3-|
P70| USB2-| S70| GND35| P99| SMARCHDMI1 TXN0| S99| DP0_LANE2+|
P71| USB2_EN_OC#| S71| USB2_SSTX+|
P100| GND20| S100| DP0_LANE2-|
P72| RSVD1| S72| USB2_SSTX-|
P101| SMARCHDMI1 TXP3| S101| GND42|
P73| NC| S73| GND36|
P102| SMARCHDMI1 TXN3| S102| DP0_LANE3+|
P74| NC| S74| USB2_SSRX+|
P75| PCIE_A_RST#| S75| USB2_SSRX-| P103| GND21| S103| DP0_LANE3-|
P76| USB4_EN_OC#| S76| PCIE_B_RST#| P104| SMARCDDI1 HPDET| S104| USB3_OTG_ID|
P77| NC| S77| PCIE_C_RST#|
P105| SMARCDDI1 AUXP| S105| DP0_AUX+|
P78| NC| S78| PCIE_C_RX+|
P106| SMARCDDI1 AUXN| S106| DP0_AUX-|
P79| GND13| S79| PCIE_C_RX-|
P80| PCIE_C_REFCK+| S80| GND37| P107| DDI1_DDCAUX SEL| S107| NC|
P81| PCIE_C_REFCK-| S81| PCIE_C_TX+|
P108| GPIO0| S108| NC|
P82| GND14| S82| PCIE_C_TX-|
P109| GPIO1| S109| NC|
P83| PCIE_A_REFCK+| S83| GND38|
P110| GPIO2| S110| GND43|
P84| PCIE_A_REFCK-| S84| PCIE_B_REFCK+| P111| GPIO3| S111| NC|
P85| GND15| S85| PCIE_B_REFCK-| P112| HDA_RST#| S112| NC|
P86| PCIE_A_RX+| S86| GND39| P113| FAN_PWMOUT| S113| NC|
P87| PCIE_A_RX-| S87| PCIE_B_RX+| P114| FAN_TACHIN| S114| NC|
P88| GND16| S88| PCIE_B_RX-| P115| GPIO7| S115| NC|
P89| PCIE_A_TX+| S89| GND40| P116| GPIO8| S116| NC|
P90| PCIE_A_TX-| S90| PCIE_B_TX+| P117| GPIO9| S117| NC|
P91| GND17| S91| PCIE_B_TX-| P118| GPIO10| S118| NC|
P92| SMARCHDMI1 TXP2| S92| GND41| P119| GPIO11| S119| GND44|
P120| GND22| S120| NC|
P93| SMARCHDMI1 TXN2| S93| DP0_LANE0+|
P121| I2C_PM_CK| S121| NC|
 |
P122| I2C_PM_DAT| S122| NC|
P123| BOOT_SEL0#| S123| NC|
P124| BOOT_SEL1#| S124| GND44|
P-Pin| Primary (Top) Side| S-Pin| Secondary (Bottom) Side
---|---|---|---
P125| BOOT_SEL2#| S125| eDP_TX0_P
P126| RESET_OUT#| S126| eDP_TX0_N
P127| RESET_IN#| S127| LCD_BKLT_EN
P128| POWER_BTN#| S128| eDP_TX1_P
P129| SER0_TX| S129| eDP_TX1_N
P130| SER0_RX| S130| GND46
P131| SER0_RTS#| S131| eDP_TX2_P
P132| SER0_CTS#| S132| eDP_TX2_N
P133| GND23| S133| LCD_VDD_EN
P134| SER1_TX| S134| eDP_AUX_P
P135| SER1_RX| S135| eDP_AUX_N
P136| SER2_TX| S136| GND47
P137| SER2_RX| S137| eDP_TX3_P
P138| SER2_RTS#| S138| eDP_TX3_N
P139| SER2_CTS#| S139| NC
P140| SER3_TX| S140| NC
P141| SER3_RX| S141| LCD_BKLT_PWM
P142| GND24| S142| NC
P143| NC| S143| GND48
P144| NC| S144| eDP0_HPD
P145| NC| S145| WDT_TIME_OUT#
P146| NC| S146| PCIE_WAKE#
P147| VDD_IN1| S147| VDD_RTC
P148| VDD_IN2| S148| LID#
P149| VDD_IN3| S149| SLEEP#
P150| VDD_IN4| S150| VIN_PWR_BAD#
P151| VDD_IN5| S151| CHARGING#
P152| VDDIN6| S152| CHARGER PRSNT#
P153| VDD_IN7| S153| CARRIER_STBY#
P154| VDD_IN8| S154| CARRIER_PWR_ON
P155| VDD_IN9| S155| FORCE_RECOV#
P156| VDD_IN10| S156| BATLOW#
 | S157| TEST#
S158| GND49

References

• ARBOR Technology | Embedded Computing, Rugged Mobile Computing, Medical Computing, Industrial Automation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>