PETZL C062CA00 Swan Freefall Steel Harnesses Instruction Manual
- June 9, 2024
- PETZL
Table of Contents
C062BA00 Swan Easyfit Stainless Harness Instruction Manual
C062BA00 Swan Easyfit Stainless Harness
Full body harness for rock climbing and adventure parks Harnais complet pour
WARNING
Activities involving the use of this equipment we inherentlydangerous. You are
responsible for your own actions and decisions. Bebe uvng the equpment.
- Read and unrierstWe all Insuuctbris U9e.
- Get specific Penrg in its pope, use.
- Beccrne ant:tingle WO its allies and enlisters.
- Urcetvwd and accept 1.
- Ors rmolPac
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR
DEATH.
UK CR 012C
This moditt Is ampltert vein the fleeteston 2016/425 en Persona Protective
Equpment as brought Into UK law and amended.
Autnonzerl Representalh*Ir UK . RE—LL UK Agency. U.-it 3-7. Tebay Business
Pwl‹. Crd Tetely. Remit’, CA10 388. Unted Kingdom
PETZL FR-38920 Grottos Cidex 105A PETZL.COM ISO 9001
Petzl
Sustaining our Community Au service de la CommunautO FONDATION-PETZL.ORG
Field of application
Inspection points to verify
Compatiblity text part
Trcceability and marking
TECHNICAL NOTICE
C0114300E (030522)
Harness set up
Front attachment point
Dorsal attachment point
Additional infromation
These instructions explain how to correctly use your equipment. Only certain
techniques and uses are described.
The warning symbols inform you of some potential dangers related to the use of
your equipment, but it is impossible to describe them all. Check
Petzl.com for updates and
additional information.
You are responsible for heeding each warning and using your equipment
correctly. Any misuse of this equipment will create additional dangers.
Contact Petzl if you have any doubts or difficulty understanding these
instructions.
Field of application
Personal protective equipment (PPE) used for fall protection from height.
Full-body harness for rock climbing and adventure parks.
This product must not be pushed beyond its limits, nor be used for any purpose
other than that for which it is designed.
Responsibility
WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions, decisions and safety.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or death.
This product must only be used by competent and responsible persons, or those
placed under the direct and visual control of a competent and responsible
person.
You are responsible for your actions, your decisions and your safety and you
assume the consequences of same. If you are not able, or not in a position to
assume this responsibility, or if you do not fully understand the Instructions
for Use, do not use this equipment.
Nomenclature
- Front attachment point,
- Waistbelt,
- Gear loop,
- Leg loop adjustment buckles,
- Shoulder strap adjustment buckles,
- Elastic keepers
- FAST LT buckle,
- FAST LT PINLOCK buckle,
- Waistbelt adjustment buckles,
- PIN-LOCK tool. Principal materials: polyester, nylon, aluminum, STEEL version: steel, STAINLESS version: stainless steel.
Inspection, points to verify
Your safety depends upon the integrity of your equipment.
Petzl recommends a detailed inspection by a competent person at least once
every 12 months (depending on current regulations in your country, and your
conditions of sage).
WARNING: your intensity of use may cause you to inspect your PPE more
frequently. Follow the procedures described at Petzl.com. Record the results
on your PPE inspection form: type, model, manufacturer contact info, serial
number or individual number, dates: manufacture, purchase, first use, next
periodic inspection; problems, comments, inspector’s name and signature.
Before each use
Check the webbing at the attachment point, at the buckles and at the safety
stitching.
Look for cuts, wear, swelling and damage due to use, to heat, and to contact
with chemicals…
Be particularly careful to check for cut or loose threads.
Check the condition of the attachment point and the buckles (absence of marks,
cracks, deformation, corrosion…).
Verify that the adjustment buckles and the fastening buckles operate properly.
During use
Regularly verify that the adjustment buckles are properly tightened. It is
important to regularly monitor the condition of the product and its
connections to the other equipment in the system.
Make sure that all items of equipment are correctly positioned with respect to
each other.
Beware of foreign objects that could impede the operation of the buckles (e.g.
pebbles, sand, clothing…). Verify that they are securely fastened.
Compatibility
Verify that this product is compatible with the other elements of the system
in your application (compatible = good functional interaction).
Equipment used with your harness must meet current standards in your country
(e.g. EN 12275 carabiners).
Harness setup
The harness must be donned and adjusted with the aid of a competent person who
is responsible for checking that the harness is properly set up, before and
during its use. Follow the directions given in the diagrams.
Always pass the excess webbing under the elastic keepers to help prevent
accidental loosening of the buckles.
Wet or icy harness straps are more difficult to adjust.
The optimal position of the front tie-in point is between the chest and the
navel.
Adjustment and suspension test
This harness must be adjusted to fit snugly in order to reduce the risk of
injury in the event of a fall.
In a safe environment, move around and hang in the harness from the tie-in
points to verify that the harness is comfortable and properly adjusted.
WARNING: incorrect adjustment of the straps exposes the user to a risk of
falling out of the harness.
Front attachment point
All tie-in or belay systems must only be connected to the front attachment point. This harness is not designed to be used in situations where the user may experience an inverted (head down) free fall.
Additional Information
This product meets the requirements of Regulation (EU) 2016/425 on personal
protective equipment. The EU declaration of conformity is available at
Petzl.com.
When to retire your equipment:
WARNING: an exceptional event can lead you to retire a product after only
one use, depending on the type and intensity of usage and the environment of
usage (harsh environments, marine environments, sharp edges, extreme
temperatures, chemicals…).
A product must be retired when:
- It is over 10 years old and made of plastic or textiles.
- It has been subjected to a major fall or load.
- It fails to pass inspection. You have any doubt as to its reliability.
- You do not know its full usage history.
- When it becomes obsolete due to changes in legislation, standards, technique or incompatibility with other equipment…
Destroy these products to prevent further use.
Icons:
- A. Lifetime: 10 years
- B. Marking
- C. Acceptable temperatures
- D. Usage precautions
- E. Cleaning/disinfection
- F. Drying
- G. Storage/transport
- H. Maintenance
- I.Modifications/repairs (prohibited outside of Petzl facilities, except replacement parts)
- J. Questions/contact
3-year guarantee
Against any material or manufacturing defect. Exclusions: normal wear and
tear, oxidation, modifications or alterations, incorrect storage, poor
maintenance, negligence, uses for which this product is not designed.
Warning symbols
1. Situation presenting an imminent risk of serious injury or death. 2.
Exposure to a potential risk of accident or injury. 3. Important information
on the functioning or performance of your product. 4. Equipment
incompatibility.
Traceability and markings
- a. Meets PPE regulatory requirements. Notified body performing the EU type examinatio
- b. Number of the notified body responsible for the production control of this PPE
- c. Traceability: datamatrix
- d. Sizing
- e. Serial number
- f. Year of manufacture
- g. Month of manufacture
- h. Batch number
- i. Individual identifier
- j. Standards
- k. Read the Instructions for Use carefully
- l. Model identification
- m. Date of manufacture (month/year)
- n. Manufacturer address
EN 12277 type A: 2015 + A1: 2018
Documents / Resources
|
PETZL C062CA00 Swan Freefall Steel
Harnesses
[pdf] Instruction Manual
C062CA00 Swan Freefall Steel Harnesses, C062CA00, Swan Freefall Steel
Harnesses, Freefall Steel Harnesses, Steel Harnesses, Harnesses
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>