Makka Cake High Performance Electric Motorbikes User Guide

Makka Cake High Performance Electric Motorbikes User Guide

Product Information

Specifications

• Rider height: 159 cm / 5’2, 175 cm / 5’9, 183 cm / 6′, 195 cm / 6’3
• Handlebar height: 1035 mm / 40.7
• Bike height: 850 mm / 33.4
• Saddle height: 790 mm / 31 (Adjustable 85 mm / 3.3)
• Footplate height: 176 mm / 6.9

Product Usage Instructions

Assembly

To assemble the Makka, follow these steps:

1. Remove all packaging materials from the box.
2. Attach the handlebar to the bike frame using the provided screws and tighten them securely.
3. Adjust the saddle height according to your preference by loosening the adjustment lever, sliding the saddle up or down, and then tightening the lever.
4. Ensure that all connections are secure and tight before using the product.

Adjustments

Here are some important adjustments you can make to customize your Makka:

Saddle Height Adjustment

To adjust the saddle height:

1. Locate the adjustment lever underneath the saddle.
2. Loosen the lever to release the saddle.
3. Slide the saddle up or down to your desired height.
4. Tighten the lever to secure the saddle in place.

Riding

Before riding the Makka, ensure that:

• The handlebar is securely attached to the bike frame.
• The saddle is adjusted to a comfortable height.
• All connections and adjustments are tight and secure.

To ride the Makka:

1. Place both feet on the footplate.
2. Hold onto the handlebar with both hands.
3. Push off with one foot and start gliding.
4. Use your body weight to steer and maintain balance.
5. To stop, gradually apply pressure to the footplate and come to a complete stop.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>