LASUNEY T8 True Wireless Stereo Earbuds User Manual
- June 5, 2024
- LASUNEY
Table of Contents
LASUNEY T8 True Wireless Stereo Earbuds User Manual
1.Package List
2.Diagram
3.Usage Instructions
4.Operation
NOTE: Under the Game/Low latency mode will increase the power consumption of the earbuds, which may affect the sound quality, battery life and etc.
5. Specification
6. LED indicator light
Troubleshooting
-
Why the earbud can not be charged when there is power in charging case?
A. Please confirm if the earbud is put in charging case correctly, otherwise, insufficient contact between the earbud and charging case will cause the earbud to fail to charge B. Wipe the pin with a clear cloth to make sure no foreign objects (If there is sweat or liquid on the electric shock of charging case, the earbud may corrode. Please clean it up if in this situation, then put the earbud into charging case again) -
Put the earbud into charging case and close the cover, why the earbuds is still connected?
It is probably that the earbud is not put in the charging case correctly. The device will disconnect by placing the earbud correctly -
Why does the earbuds suddenly get stuck when using?
Due to the feature of TWS, electromagnetic interference in the area may cause temporary stalling. Use it in another scene -
Why 2 earbuds can’t be paired or there is no sound of the right/left earbud?
You may need to reset the earbuds. Try the follow steps to reset: 1)Delete the pairing name”T8″ on your mobile phone and turn off the Bluetooth function. 2)Double click the MFB, then long press the MFB for 8S, the white light will flash 3S and then the pairing is been successfully remove, the headphone will enter automatically pairing modes. 3)Reconnect to your device again. -
Can you connect two different devices separately in binaural mode?
No
FCC Statement
This equipment has been tested and found to o:im ply wth the limits 1or a CI ass B digital device, pursuant to Part 15 of the FCC Rules. These Ii m Its ere designed to prude reasonable protection against harm 1ul interference in a residential install at ion. This equipment generates uses end can radiate radio Frequency energy and, if not installed and used in accordance wth the instructions, may Louse harmful interference to radio immunisations. However, there is no guarantee that interference WII not odour in a particular installation. If this equipment does cause harm 1ul interference to radio or television reception, can be determined by lining the equipment off and on, the user is Enco raged to try to o:irrect the interference by one or more o1 the 1ol lowing measures:
– Reorient or relocate the receiving antefixa.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a druid different fid that receiver
is connected.
– Consult the dealer or an experienced radio/TV technical for help.
This device complies with part 15 other FCC Rules. Operation is subject to the following tow conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2A5OU-8119