RoHS X10 Bluetooth Alarm Clock Speaker User Manual

June 6, 2024
RoHS

RoHS X10 Bluetooth Alarm Clock Speaker User Manual

IMPORTANT:

All safety and operating instructions should be read thoroughly before proceeding and please keep this handbook for future reference.

  1. Features and Functions
    X10 is a multi-functional Bluetooth electronic Alarm Clock Speaker
    Functions as follows:
    -Bluetooth wireless speaker
    -Large screen Clock display
    -Dual Alarm Clock function with adjustable Volume adjustable and
    Snooze
    -3.5mm headphone audio jack
    -2 USB ports for charging additional devices
    -LED night light with adjustable brightness
    -LED time display with adjustable brightness
    -Displays Day of Week
    -FM Radio

  2. What’s included
    (Please carefully check the product and accessories in the package after purchase)
    ①X10 Main Unit ②Aux-in Cable
    ③Power Adaptor ④User manual
    ⑤Button Cell Battery

  3. Home button and LED screen display

    ①On-off button and mode switching (Bluetooth, FM Radio, AUX)
    ②Adjust LED display brightness, Sleep timer function
    ③Last song: Play last song and last Channel on the radio, decrease time, decrease volume
    ④Pause, set time, set alarm time,

    ⑤Next song: Play next song and next Channel on the radio, increase time, increase volume
    ⑥Alarm 1: turn on/off Alarm 1, manually tune last radio channel
    ⑦Alarm 2: turn on/off Alarm 2, manually tune next radio channel
    ⑧Temperature sensor ⑨DC5V power socket
    ⑩USB charging
    ⑫USB charging
    ⑪Button cell battery bin.
    ⑬ 3.5mm audio output and radio antenna
    ⑭ LED night light
    ⑮ Call MIC
    ⑯ LED display.

4. Operation instructions

4.1. On and off setting

Step 1: Insert the button cell battery (included) into the battery compartment at the bottom of the clock
Step 2: Insert the power adaptor into the power outlet and the alarm clock will be on. (ONLY use the supplied power adaptor to operate this unit)
Note: Unplug the power adaptor will turn the alarm clock off. The button cell battery can only be used for maintaining the clock setting, but not for any operation.

MODE SELECTIONS

Short press the “MODE” button on the clock to switch among modes, the
modes of Bluetooth/Radio/AUX. Long press to turn off the mode function.

4.2 Time setting

NOTE: You CAN’T set the time or alarms on the Radio Mode, so please select other modes before doing it
Step 1: Long press the “ ” button for 2 seconds to enter 12H/24H format selection. The display begins to flash
Step 2: Short press the “ ” button to select 12H/24H time format
Step 3: Short press the “ ” button to confirm the 12/24 hour time format and enter hour setting mode. The display begins to flash
Step 4: Short press the “ ” button to adjust hour
Step 5: Short press the “ ” button to confirm hour and enter minute setting mode. The display begins to flash
Step 6: Short press the “ ” button to adjust minute
Step 7: Short press the “ ” button to confirm minute and enter week setting mode. The display begins to flash
Step 8: Short press the “ ” button to adjust week
Step 9: Short press the “ ” button to confirm week and finish time setting.

4.3 Screen Display Brightness Setting

Short press the “sleep” button to adjust the display brightness or to turn off the display. There is a 4-level brightness control for the display.

4.4 Sleep Timer Setting

4.4 Sleep Timer Setting
Step 1: Short press the “ MODE” button to select among Bluetooth/Radio/ AUX mode
Step 2: Long press the “ ” button for 2 seconds to enter sleep timer setting
Step 3: Short press the “ ” button to select the timer duration (15~30~45~60~90min). The clock will automatically go back to time display
in 10 seconds after selecting without any operation

4.5.1 Alarm Setting

NOTE: Alarm 1 is a long-term weekly alarm.
Step 1: Short press the “ ” button to turn on the alarm. The default alarm time will show on the screen
Step 2: Long press the “alarm 1” button to enter alarm time setting mode. Hour on the display begins to flash
Step 3:Press the “ ” button to adjust hour
Step 4: Short press the “ ” button to confirm hour and enter minute setting mode. Minute on the display begins to flash
Step 5:Press the “ ” button to adjust minute
Step 6: Short press the “ ” button to confirm minute and enter alarm ringtone selection mode
Step 7: Press the “ ” button to choose ringtone between FM radio and traditional buzzer
Step 8: Short press the “ ” button to confirm ringtone and enter weekday setting mode
Step 9: Press the ” ” button to adjust weekday
Step 10: Short press the “alarm 1” button to confirm weekday and enter alarm volume setting
Step 11: Press the “ ” button to adjust alarm volume
Step 12: Short press the “ ” button to confirm and finish alarm 1 setting

4.5.2 Alarm 2 Setting

NOTE: Alarm 2 is a one-time alarm. It will turn off automatically after ringing once. Its setting is the same as alarm 1 except without step 9 and
step 10.the confirm button from to

4.5.3 Snooze Function

Press any button (except alarm buttons) to turn on the snooze function when the alarm rings. The alarm will shut off and ring again in 5 minutes.
NOTE: The alarm will keep ringing continuously for 1 hour without pressing the corresponding alarm button to turn it off when it rings

4.6 bluetooth function

Step 1: Press the “MODE”button to select bluetooth mode. The will flash
Step 2: Pair your phone with the clock and it can be used as Bluetooth speaker to play music. The will be always on
Step 3: Short press the “ ” button to play previous song and “ ” button to play next song.The music will pause after short pressing the “ ” button

Step 4: Long press the “ ” or “ ” button to adjust volume
NOTE: Short press the “ ” button to start a hands-free Bluetooth wireless call when a phone call is coming if the phone is still connected

4.6 FM Radio Setting

Note:Please plug in the 3.5mm Aux-in Cable (included) to get better signal before searching radio channels.Can’t adjust time or alarms on radio mode Automatically Searching for Channels
Step1: Short press the “MODE” button to select the radio mode. The radio icon ” “begins to flash
Step2: Long press the “ ” button to enter automatic channel search mode (The search frequency is from 87.5Mhz to 108Mhz). It will go back to the first channel after finishing searching
Step3: Short press the button to play previous channel and to play next channel. Short press the “ ” button to pause the radio Manually Searching for Channels
Long press the or the button to search for a channel manually while it’s on FM radio mode. The alarm clock will play the last channel automatically in 5 seconds without any operation
4.7 Temperature &LED night light Setting Short press the ” “button on the LED screen to adjust night light brightness ( Low ~ Medium ~ High ~ Pulse ~ off).
Long press the ” ” button for 2 senconds on the LED screen to switch between Celsius and Fahrenheit. 4.8 AUX connection and playback Short press the “MODE”button until the AUX icon light on. Use the attached 3.5MM audio cable to the AUX jack at the back of the alarm clock and then connect the other end of the audio cable to another device.

4.9 USB charging

This product provides 2 USB charging ports, which can charge 2 additional
USB devices

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals