FUGOO F6ELKS01 Element Bluetooth Speaker User Manual

: June 6, 2024
: FUGOO

FUGOO F6ELKS01 Element Bluetooth Speaker

In the Box

Fugoo Element Bluetooth speaker
5V/1A 1m (3.2’/3.2ft) Micro-USB power cable
3.5mm 0.6m (1.9’/1.9ft) AUX IN audio cable
Quick Start Guide & User Manual (Including Warranty Statement)

Button & LED Lights (Top)

Power Button
Power LED (RED)
Play/Pause Button
Decrease Volume Button
Microphone
Increase Volume Button
Bluetooth® Button
SYNC LED (Blue/Amber)
SYNC Button
Carrying Strap Bracket
AUX IN 3.5 mm Port – Wired Audio-in
Micro-USB Port (DC IN) – Charging / Firmware Updating
¼” Universal Mount

Charging

IMPORTANT: Charge for 6 hours before first use. Connect a micro-USB cable into the DC IN port of the speaker. Plug the other end of the cable into an AC adapter and that adapter into an AC power outlet.

Battery status

While the battery is being charged, the LED will slowly pulse RED; When fully charged, the LED will glow solid RED.
Full charge achieved in 6 hours while powered OFF or 12 hours while powered ON.

Power, Bluetooth pairing, and speaker controls

Power

Power On / Off ………………………………….. Hold Power button (1 second)

Bluetooth pairing

DO NOT have a line connection in the AUX-IN port
Pair devices within 3 feet (1 meter); Max signal range of 33 feet (10 meters); Signal disruption/loss may occur when devices are out of range from each other.
Pair devise………………………………………… Hold Bluetooth button (3 seconds)
Turn your audio source’s Bluetooth On and select “FUGOO ELEMENT”
Disconnect device……………………………. Click Bluetooth button
Clear all paired devices ……………………. Hold button (10 sec

Audio controls

Play / Pause ………………………………………. Click play button
Volume up …………………………………………. Click + button
Volume down ……………………………………. Click – button
Next track …………………………………………… Click the play button and +
Previous track …………………………………….. Click the play button and –
Voice Control………………………………………. Hold play button (2 seconds)
TWS pair/unpair…………………………………… Hold SYNC button (2 seconds)

Call controls

Answer/end call ………………………………. Click Bluetooth button
Reject a call ……………………………………….. Double-click Bluetooth button
Mute microphone in a call ………………… Click + and – buttons

The speaker must be off for the following functions to work:

Power Save On / Off …………………………. Hold- and power off button

If the speaker is not connected to a source device and is not plugged into a power source, the speaker turns off after 15 minutes of inactivity.
If the speaker is not connected to a source device and is plugged into a power source, the speaker turns off after 30 minutes of inactivity.
If the speaker is connected to a source device and is not plugged into a power source, the speaker turns off after 1 hour of inactivity.
If the speaker is connected to a source device and is plugged into a power source, the speaker will not shut off automatically.

Line in mode

If there is no signal input and is not plugged into a power source, the speaker turns off after 60 minutes of inactivity.
If the speaker is plugged into a power source, the speaker will not shut off automatically.
If Power Save mode is off, then the speaker will remain on until you turn it off by pressing the power button for 1 second.

TWS pairing

Pair speaker to a Bluetooth audio device (transmitter).
Power On a second SYNC compatible speaker (receiver) Does NOT pair to Bluetooth device.
If BT (receiver) device is connected, long-press the Bluetooth button (3 seconds) to enter TWS pairing.
Hold the SYNC Button of the Bluetooth paired speaker for 2 seconds.
While TWS pairing
The LED on the transmitting devices will ﬂashes blue alternately, searching for a TWS compatible device to connect to.
TWS Successful:
Transmitting LED: Blue
Receiving LED: Amber

AUX IN (3.5 mm audio cable)

Plugging in a 3.5 mm audio cable into the AUX IN input will disable the Bluetooth function and will switch the audio signle to the AUX IN audio mode.

IPX7 (waterproof)

This speaker has protection against water to a max depth of 3 feet (1 meter) for up to 30 minutes.

Floats

The speaker naturally ﬂoats on the surface of the water.

CAUTION:

The protective rubber tab, covering the DC IN and AUX IN ports, must be ﬁrmly in place before immersing the speaker in water or permanent damage may occur.
Do NOT immerse while charging.
Never connect a cable to any of these connectors if they are wet, or are at risk of getting wet.

Support

Visit Fugoo’s Support page at support.fugoo.com for help with connecting, to view our FAQs, or to ask us a question.
Visit Fugoo’s downloads page at fugoo.com/product-support, for ﬁrmware updates, alternative voice prompts, and mobile wallpaper images.
Send us a support request at support@fugoo.com.

Specifications

Power
- Battery ……………………………………………….. Lithium-Ion 4400mA
Audio
- Speaker drivers …………………………………. (x2) 1.75” Speaker
  ………………………………………………………… (x2) 2.5” Passive Radiators
- Audio output ……………………………………… 20W
- Frequency Range ……………………………… 50Hz – 20KHz
- THD + Noise ……………………………………… ≤10%
- Signal-to-Noise …………………………………. >60dB
- Microphone ……………………………………….. Omnidirectional
  ………………………………………………………… Echo cancelling
  ………………………………………………………… Noise reducting
Conectivity
- Bluetooth Version …………………………….. 4.2
Construction
- Materials ……………………………………………. Plastic and metal
- Weight ……………………………………………….. 1.8 lbs. / 0.82 kg
- Dimensions (LxWxH) …………………………. 9.35” x 3.3” x 3.25”
  ………………………………………………………… 238 x 84 x 82mm
Enviroment
- Water resistants ………………………………… IPX7
- Operating Temp. Range …………………… 32F° to 104F° / 0C° to 40C°
- Operating Humidity ………………………….. 40-90% RH
- Storage Temp. Range ………………………. -13F° to 158F° / -25C° to 70C°

Legal notices

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution! Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.